(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Tube Fitting Union T for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Nitta
No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 8 Days or more |
---|
Antistatic Tube Fitting EG Union Tee
Nihon Pisco
[Features]
· A static dissipating resin is used (surface resistance: 104 to 107 Ω).
· Optimal for lines requiring static electricity dissipation and anti-static properties.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee
Nihon Pisco
No copper-based metal used. Also optimal for low-concentration ozone measures.
[Features]
· Perfect when additional strength is required and when used in a corrosive atmosphere.
· Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.
Days to Ship: | 8 Days or more |
---|
Chiyoda
[Features]
· Selectable main body material of metal or resin types.
· Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.
Days to Ship: | 8 Days or more |
---|
Chemifit C1 Series - Union Tee - EUT-C1
Nitta
The EUT-C1 union tee is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.
Days to Ship: | 7 Days or more |
---|
Push to Connect Fittings - Miniature, Union Tee
MISUMI
This is the Miniature One-Touch Coupling.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, Tee
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Tees
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fitting - Union Tee
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Tees
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Union Tee
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Tees
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Tee fitting
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type Union Tee for Clean Environments
Nihon Pisco
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· Polypropylene or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.
Days to Ship: | 6 Days or more |
---|
Tube Fitting Chemical Type Union Tee for Clean Environments
Nihon Pisco
[Features]
· The main body uses PPS resin with superior heat resistance, flame-retardant (UL94V-0) and chemical resistance properties.
· FKM is utilized in the seal.
· EPDM and NBR types available as optional extras.
· The used parts must not be exposed to grease.
· Compliant with the Food Sanitation Laws of Japan (FKM type only).
· No need to worry about rust or metal ions.
· Two packaging specifications available – normal packaging and clean room packaging – according to the specific application.
Days to Ship: | 8 Days or more |
---|
for General Piping, Tube Fitting Mini-Type Union Tee
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Sputter Union T for Sputter Resistance
Nihon Pisco
[Features]
· Flame retardant resin is used.
· Excellent sputter resistance (spark) (V-O comparable product).
· Equipped with release ring cover.
· Prevents operational failure of the release ring caused by sputtering.
Days to Ship: | Same day or more |
---|
Show Stock Products
for Sputtering Resistance, Tube Fitting Brass, Union Tee
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | Same day or more |
---|
Show Stock Products
for Sputtering Resistance, Tube Fitting Brass, Union Tee, No Cover
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 15 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Union Tee
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304.
Days to Ship: | 8 Days or more |
---|
Chiyoda
Low-weight, one-touch fitting with a flame retardant resin. Union Tees.
[Features]
· Good price-performance by thoroughly reducing materials.
· Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized, to achieve the ultimate cost performance.
· Made lightweight by thoroughly reducing materials.
· Further weight reduction achieved by making body parts all resin.
· A new lock ring has been adopted.
· Uses a joint function to perform piping work more smoothly and securely.
· New ring packing has been adopted.
· Reduces connection operability while maintaining high air-tightness.
· Laser marking process on all items.
· Recorded all the item types on the product.
· Flame retardant body: Adopts a flame-retardant resin.
· Screw part sealing (R screw): Can be used for piping as is because the screw part has been sealed.
· Free use of the upper thread part of screw: the elbow body and screw part can be rotated.
* This is not a rotary type. We will not rotate the all-resin type.
Days to Ship: | 8 Days or more |
---|
Touch Connector FUJI Union Tee
Chiyoda
[Features]
· One-touch fitting with rotation lock ring that prevents full rotation of the tube.
· Reducer union with plastic body.
Days to Ship: | 8 Days or more |
---|
Touch Connector FUJI H Type Union Tee
Chiyoda
Union tee with a sturdy metal exterior ideal for environments where sparks are generated.
[Features]
· All-metal types and resin body types available.
· All-metal types feature excellent strength under tough conditions, while resin body types are lightweight.
· Pipes connected to different machines can be identified easily when indicator rings (sold separately) are attached.
· Rotation lock ring prevents rotation stoppage of tubing.
· Screw element sealing (R screw): Can be used for piping as-is due to screw element sealing.
· The body and screw elements of elbows and branch tees can rotate.
· *Not a rotary type.
Days to Ship: | 8 Days or more |
---|
Touch Connector H Type Union Tee
Chiyoda
[Features]
· This new fitting has a protection sleeve which prevents weld spatter from adhering around the release level.
· Most one touch connectors have a plastic release ring only and they are often damaged by weld spatter
Days to Ship: | 13 Days or more |
---|
Touch Connector Five, H Type, Union Tee
Chiyoda
[Features]
· Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
· Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.
Days to Ship: | 8 Days or more |
---|
Junron One-Touch Fitting M Series (for General Piping) Union Tee
Junkosha
[Features]
· Electroless nickel plating is as standard applied to metal parts.
· The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removing direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
Days to Ship: | 12 Days or more |
---|
Nitta
No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 8 Days or more |
---|
Push-in Fitting, WP Series, Union Tee【1-10 Pieces Per Package】
Myotoku
[Features]
· Touch connector is made of only six parts.
· A newly designed lock ring assures a tight tube connection and smooth insertion.
· Tube can be inserted with light force. High airtight reliability
· Standard flame-resistant resin material PA and F/G (Polyamide).
Days to Ship: | 8 Days or more |
---|
Reducing Union T Push to Connect Fittings with Buna-N O-Ring, Nylon - TF-PTC Series
USA Industrials
Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.
Days to Ship: | 13 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
|
| |||||||||||||||||||||||||||
Brand | Nihon Pisco | Nitta | Nihon Pisco | Nihon Pisco | Chiyoda | Nitta | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Junkosha | Nitta | Myotoku | USA Industrials |
Product Series | for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee | Tube Fitting Polypropylene Type Union Tee for Clean Environments | for Sputtering Resistance, Tube Fitting Brass, Union Tee, No Cover | Junron One-Touch Fitting M Series (for General Piping) Union Tee | Push-in Fitting, WP Series, Union Tee【1-10 Pieces Per Package】 | Reducing Union T Push to Connect Fittings with Buna-N O-Ring, Nylon - TF-PTC Series | ||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 15 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 13 Days or more |
Specifications |
|
|
|
| ||||||||||||||||||||||||
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | - | Flame Resistant Resin (UL94 V-0 equivalent) | Static Dissipation Resin | - | Brass | PP Resin | - | 316 Stainless Steel | - | - | - | Flame Resistant Resin (UL94 V-0 equivalent) | PP Resin | PPS Resin | - | Flame Resistant Resin (UL94 V-0 equivalent) | Brass | Brass | - | Standard (PBT Polybutylene Terephthalate) | Others | Others | Brass | Brass | Standard (PBT Polybutylene Terephthalate) | Flame Resistant Resin (UL94 V-0 equivalent) | PA Resin | - |
Seal Material | - | H-NBR | - | - | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | Standard (NBR Nitrile Rubber ) | Fluororubber | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | EPDM Synthetic Rubber | - | - | - | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | H-NBR | Standard (NBR Nitrile Rubber ) | - |
Thread Portion Material | - | Standard (Brass) | - | - | Standard (Brass) | PP Resin | No Thread | No Thread | No Thread | No Thread | No Thread | - | - | - | - | - | - | - | - | No Thread | Standard (Brass) | No Thread | Standard (Brass) | - | No Thread | Standard (Brass) | - | - |
Application | Standard, Mini / Clean Environment | Standard, Mini | Static DissipationAntistatic | Standard, Mini | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Clean Environment | Standard, Mini | Standard, Mini | - | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related / Heat Resistant | Standard, Mini | Sputter Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Standard, Mini / Food, Pharmaceutical Related | Standard, Mini | Standard, Mini | Standard, Mini / Sputter Resistant | Standard, Mini | Standard, Mini / Sputter Resistant | Standard, Mini | Standard, Mini | Standard, Mini | - |
Applicable Fluid | Water / Air | Water / Air | Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Air | Water / Air | Water / Air / Chemical, Solvent | Air | Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air |
Fitting Type | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Unequal Dia. |
Screw Mounting, Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Elbows | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Mounting, Branch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Union, Equal Dia. | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees | Union Tees |
Union, Unequal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1(φ) | 4 ~ 16 | - | 3 ~ 12 | 4 ~ 16 | 4 ~ 12 | 3 ~ 12.7 | - | - | - | - | - | 6 ~ 10 | 4 ~ 12 | 4 ~ 12 | 1.8 ~ 6.35 | 4 ~ 8 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 16 | 4 ~ 12 | 6 ~ 8 | 6 ~ 12 | 6 ~ 12 | 8 ~ 12 | - | 6 ~ 10 | 1/2" ~ 16 |
Tube Size 2(φ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy