Push to Connect Fittings（Union, Equal Dia.：Union Straight）

• 

  Tube Fitting Union Straight for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.[Features]· One-touch fitting for general pneumatic pipes.· Can change the take-off angle of the resin body after mounting.· Diverse lineup.· Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Touch Connector Five, H Type, Union Nipple

  Chiyoda

  [Features]· Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter. · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series, Union Connector EUC-C1

  Nitta

  The EUC-C1 union connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Bulkhead Union Push to Connect Fittings with Buna-N O-Ring, Nylon & Stainless Steel - TF-PTC Series

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.

  Days to Ship:	13 Days

• 

  Union Push to Connect Fittings with Buna-N O-Ring, Nylon - TF-PTC Series

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.

  Days to Ship:	13 Days or more

• 

  Push to Connect Fittings - Miniature, Union

  MISUMI

  This is the Miniature One-Touch Coupling.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Stainless Steel, Union

  MISUMI

  All Stainless Steel One-Touch Couplings.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Clean Room, Straight Union

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fitting - Bulkhead Union

  MISUMI

  •Application: Standard, Mini•Union, Equal Dia.: Union Straight•Type: One-Touch Couplings•Thread Portion Material: C36000 Brass (Brass)•Seal Material: Nitrile Rubber

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	9 Days or more

• 

  Push to Connect Fittings - Union Straight

  MISUMI

  •Application: Standard, Mini•Union, Equal Dia.: Union Straight•Type: One-Touch Couplings•Thread Portion Material: No Thread•Seal Material: Nitrile Rubber

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  New Joint GWS □-0 Series

  CKD

  Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.Straight fitting

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Polypropylene Type Union Straight for Clean Environments

  Nihon Pisco

  [Features]· The main body uses Polypropylene resin suitable for clean environments.· EPDM is utilized in the seal.· FKM and NBR types are available as optional extras.· Polypropylene or SUS304 can be selected for the screw element.· Use of oil permitted.· Plastic body is clear colored to allow water flow to be observed.· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Chemicals, Tube Fitting Chemical Type Union Straight

  Nihon Pisco

  PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.[Features]· PPS is used for the main body material for excellent heat resistance, flame retardancy (UL94V-0), and chemical resistance.· FKM is a use option for the seal. Other options include NBR and EPDM.· None of the parts used must be exposed to grease.· Also compliant with the Food Sanitation Law of Japan (FKM type...Readmore

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Mini-Type Union Straight for General Piping

  Nihon Pisco

  [Features]· Ultra-small one-touch fitting for general pneumatic pipes.· Reduced size with a volume ratio of 40% over the standard type.· Elliptical release ring allows easy tube release.· The φ1.8 mm type is an industry-first minimum one-touch type.· Optimum for piping of small actuators and such.· Light gray types, and clean room packaged types available as options.· Clean room packaging specifications define the use of fluorinated grease.·...Readmore

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  for Anti Static, Tube Fitting EG, Union Straight

  Nihon Pisco

  Optimal for lines requiring static electricity dissipation and anti-static properties.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  for Sputtering Resistance, Tube Fitting Sputtering, Union Straight

  Nihon Pisco

  [Features]· Flame-Retardant Resin. Resistant to Flame and Weld Spatter. (Equivalent to V-0).· Release-Ring Cover prevents malfunction of Release-Ring due to the weld spatter.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Plus Union Straight for Sputtering Resistance

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardance and sputtering resistance.[Features]· Available sealing rubber materials include HNBR, FKM, and NBR.· Ideal for environments where exposure to sparks may occur.· Release ring made of brass offers excellent flame retardance and sputter resistance. Cover type prevents sputtering inside the fitting and dust intrusion.· An optional spatter cover shuts out fi...Readmore

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  for Sputtering Resistance, Tube Fitting Brass Union Straight, No Cover

  Nihon Pisco

  [Features]· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.· Avoids Spatter and Dusts by Optional Protective Cover.· HNBR or FKM for Seal Rubber Selection

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance, SUS304 Fitting, Union Straight

  Nihon Pisco

  [Features]· This tube fitting serves best where strength is required or the atmosphere contains chemicals.· Seal material is made of FKM.· Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Straight

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.[Features]· Perfect when additional strength is required and when used in a corrosive atmosphere.· Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).· Copper based metal is not used.· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Different Diameters Union Straight

  Nihon Pisco

  No copper-based metal used. Also optimal for dealing with low-concentration ozone .[Features]· Perfect when additional strength is required for corrosive atmosphere applications.· Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).· Copper based metal is not used.· HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  Touch Connector Five, Union

  Chiyoda

  [Features]· TCV is composed of only five components. Fewer-components lower the cost considerably. · A solid resin body type is available in both male and elbow connector styles. · A newly designed stainless-steel locking ring assures a complete tube connection· A newly designed ring backing assures a complete seal.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Mini Union

  Chiyoda

  Ultra-compact one-touch fitting useful for reducing space occupied by piping. Union.[Features]· Ultra-small, reducing piping space.· Electro-less nickel plating, which provides superior corrosion resistance properties, is used.· A hex recess type male connector (straight) is used to save space.· Rotation lock ring prevents full rotation of the tube.· The body and screw elements of the elbows and branch tees can rotate.· *Not a rotary type.· Scr...Readmore

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	13 Days or more

• 

  Touch Connector Fuji, Union

  Chiyoda

  [Features]· Selectable main body material of metal or resin types. · One-touch connection and disconnection without tools. · Color ring accessory can be attached for easier identification.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Nipple Union

  Chiyoda

  [Features]· Selectable main body material of metal or resin types. · Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	11 Days or more

• 

  Touch Connector FUJI H Type Union

  Chiyoda

  Union with a sturdy metal exterior ideal for environments where sparks are generated.[Features]· All-metal types and resin body types available.· All-metal types feature excellent strength under tough conditions, while resin body types are lightweight.· Pipes connected to different machines can be identified easily when indicator rings (sold separately) are attached.· Rotation lock ring prevents rotation stoppage of tubing.· Screw element...Readmore

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Union

  Junkosha

  [Features]· Electroless nickel plating is applied to metal parts as standard.· The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.· Color seal for seal identification.· Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).· You can position the body in accordance with the removal direction of the tube.・R (PT) screw parts...Readmore

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Union (Made of Plastic)

  Junkosha

  Incombustible. Superior body strength and impact resistance. The tube grip comes with a rotating mechanism. All the sealing material is water resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.[Features]· All the resin parts conform to UL94V-0 flame retardancy rating.· The burst strength of the R (PT) resin press fit part is stronger than that of conventional parts.· The impact resistance has...Readmore

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Union (Made of Brass)

  Junkosha

  Non-flammable. Superior body strength and impact resistance. The tube grip comes with a rotating mechanism. All the sealing material is water resistant NBR. No need for sealing tape. The R (PT) thread part and resin connection part rotate.[Features]· Plastic portion conforms to UL94V-0 flame retardant rating.· The burst strength of the R (PT) resin press fit part is stronger than that of conventional parts.· The shock resistance has i...Readmore

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Push One A Series Union Connector

  Nitta

  No jigs or tools are required for connecting tubes to this union connector. The surface is resistant to degradation, preventing elution of copper ions.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  PushOne E Series Union Connector

  Nitta

  No jigs or tools are required for connecting tubes to this union connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

Loading...