(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Nitta
No jigs or tools are required for connecting tubes to this service tee. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 8 Days or more |
---|
Tube Fitting for General Piping - Branch Tee
Nihon Pisco
[Features]
•One-touch fitting for general pneumatic pipe use
•Wide variety of options available
•In-situ adjustment of the resin body take-off angle
•Enables centralized piping
•Light gray and clean room packaged options available
•Fluorinated grease used to meet clean room packaging specifications
•Item is package in an ISO 6 clean room, following purification with clean air
Days to Ship: | 8 Days or more |
---|
Touch Connector 5 Mail Run Tee
Chiyoda
[Features]
· TCV is composed of only five components. Fewer-components lower the cost considerably.
· A solid resin body type is available in both male and elbow connector styles.
· A newly designed stainless-steel locking ring assures a complete tube connection
· A newly designed ring backing assures a complete seal.
Days to Ship: | 8 Days or more |
---|
Chiyoda
[Features]
· Selectable main body material of metal or resin types.
· Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.
Days to Ship: | 13 Days or more |
---|
Junron One Touch Fitting M Series (for General Piping) Service Tee
Junkosha
[Features]
· Electroless nickel plating is applied to metal parts as standard.
· The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removal direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.
Days to Ship: | 12 Days or more |
---|
Push One E Series Brass Body Type Service Tee
Nitta
[Features]
· The tube is connected by Push One®.
· No need for jigs nor tools to connect the tube.
· Conductivity can be ensured by combining it with a UE tube.
· Flame retardant resin (equivalent of UL94 V-0 standard) adopted.
· Equivalent to UL94 V-0 standard, has superior self-extinguishing properties.
· Can be used in environments that sputtering occurs.
· The R threads are sealed, so there is no need to wrap them with sealing tape.
•Elbow and tee enable direction adjustment of the tube after tightening the screw.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
Brand | Nitta | Nihon Pisco | Chiyoda | Chiyoda | Junkosha | Nitta |
---|---|---|---|---|---|---|
Product Series | Junron One Touch Fitting M Series (for General Piping) Service Tee | |||||
CAD |
|
|
|
|
| |
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 12 Days or more | 8 Days or more |
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | Flame Resistant Resin (UL94 V-0 equivalent) | - | Standard (PBT Polybutylene Terephthalate) | Brass | Standard (PBT Polybutylene Terephthalate) | Brass |
Seal Material | H-NBR | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | H-NBR |
Thread Portion Material | Standard (Brass) | - | Standard (Brass) | Standard (Brass) | Others | Standard (Brass) |
Application | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini |
Applicable Fluid | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Air |
Fitting Type | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch |
Screw Mounting, Direction | - | - | - | - | - | - |
Elbows | - | - | - | - | - | - |
Screw Mounting, Branch | Branch Tees | Branch Tees | Branch Tees | Branch Tees | Branch Tees | Branch Tees |
Union, Equal Dia. | - | - | - | - | - | - |
Union, Unequal Dia. | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - |
Branch A | - | - | - | - | - | - |
Tube Size 1(φ) | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 16 | 6 | 8 | 8 ~ 12 |
Tube Size 2(φ) | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy