(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Tube Fitting Union Straight for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Tube Fitting Union Y for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | Same day or more |
---|
Show Stock Products
Chiyoda
[Features]
· TCV is composed of only five components. Fewer-components lower the cost considerably.
· A solid resin body type is available in both male and elbow connector styles.
· A newly designed stainless-steel locking ring assures a complete tube connection
· A newly designed ring backing assures a complete seal.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Union Tee
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Tees
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
PushOne E Series Union Connector
Nitta
No jigs or tools are required for connecting tubes to this union connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
Days to Ship: | Same day or more |
---|
Show Stock Products
Push to Connect Fitting - Bulkhead Union
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Straight
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Y tee fitting
Days to Ship: | 9 Days or more |
---|
Tube Fitting for General Piping - Mini Type Union Elbow
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The 1.8 mm diameter type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators, etc.
· Light gray types and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 6 Days or more |
---|
for Sputtering Resistance, Tube Fitting Brass, Union Y, No Cover
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 15 Days or more |
---|
Tube Fitting Plus Bulkhead Union for Sputtering Resistance
Nihon Pisco
The main body and release ring are made of brass for superior flame retardancy and spatter resistance.
[Features]
· Available sealing rubber materials include HNBR, FKM, and NBR.
· Ideal for environments exposed to sparks.
· The release ring made of brass offers excellent flame retardancy and spatter resistance.
· The type with a cover prevents dust and spatter from getting through to the fittings' internals.
· An optional spatter cover that shuts out fine sparks.
· By placing a separately sold release ring cover (CS), sparks that penetrate through the gap between the release ring and the tube cannot get close
Days to Ship: | 15 Days or more |
---|
for Sputtering Resistance, Tube Fitting Brass, Bulkhead Union, No Cover
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 8 Days or more |
---|
Chiyoda
Low-weight, one-touch fitting with a flame retardant resin. Union Tees.
[Features]
· Good price-performance by thoroughly reducing materials.
· Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized, to achieve the ultimate cost performance.
· Made lightweight by thoroughly reducing materials.
· Further weight reduction achieved by making body parts all resin.
· A new lock ring has been adopted.
· Uses a joint function to perform piping work more smoothly and securely.
· New ring packing has been adopted.
· Reduces connection operability while maintaining high air-tightness.
· Laser marking process on all items.
· Recorded all the item types on the product.
· Flame retardant body: Adopts a flame-retardant resin.
· Screw part sealing (R screw): Can be used for piping as is because the screw part has been sealed.
· Free use of the upper thread part of screw: the elbow body and screw part can be rotated.
* This is not a rotary type. We will not rotate the all-resin type.
Days to Ship: | 8 Days or more |
---|
Chemifit C1 Series, Union Connector EUC-C1
Nitta
The EUC-C1 union connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.
Days to Ship: | 7 Days or more |
---|
Nitta
No jigs or tools are required for connecting tubes to this Y union. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.
[Features]
· The tube is connected by Push One®.
· No need for jigs or tools to connect the tube.
· Electroless nickel plating.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· The white body contributes to workplace environment aesthetics.
· Noncombustible PBT resin is used for the base material.
· Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
· Can be used in environments where sputtering is an issue.
· R screws are sealed, and thus there is no need to wrap them with sealing tape
Days to Ship: | 7 Days or more |
---|
Nitta
No jigs or tools are required for connecting tubes to this Y-union unit. The surface is resistant to degradation, preventing elution of copper ions.
Days to Ship: | 7 Days or more |
---|
One-Touch Fitting KQ2 Series Union Elbow KQ2L【5-10 Pieces Per Package】
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal
· Compact and lightweight
[Applications]
Use to connect tubing at right angles.
[See here for the catalog]
Applicable tube outer diameter (metric), Release button: oval (p. 11) circle (p. 109)
· Applicable tube outer diameter (inches), Release button: oval (p. 35) circle (p. 141)
Days to Ship: | Same day or more |
---|
Show Stock Products
Bulkhead Male Elbow KQ2LE One-Touch Fitting【5-10 Pieces Per Package】
SMC
A one-touch fitting by SMC.
[Features]
· Improved tube insertion/removal.
· Compact and lightweight.
· Can be used with a vacuum pressure of -100 kPa or more.
· Body shape: Total of 51 models.
· Thread part material / surface treatment (with/without): 2 types.
· Available surface treatment: brass (no plating), brass + electroless nickel plating.
[Applications]
· Use to connect tubing through panels, etc., and to change the tube direction by 90 degrees.
[See here for the catalog]
Dimensional outline drawing: pp. 24, 46, 129, 154
Product details: pp. 5, 29, 101, 133
Standards information: pp. 6, 30, 102, 134
Days to Ship: | Same day or more |
---|
Show Stock Products
Union Elbow KAL Antistatic One-Touch Fitting【10 Pieces Per Package】
SMC
SMC One-Touch fitting.
[Features]
· One-touch fitting with antistatic prevention.
· One-touch IN/OUT connection.
· Can be used in a vacuum of -100 kPa.
· Can be used in copper-free applications.
· Flame resistant (equivalent to UL-94 Standard V-0)
· Conductive resin is used for body and seals in fittings and tubing.
[Applications]
· Used to connect tubes at right angles.
Days to Ship: | 3 Days |
---|
Union "Y" KQB2U Metal One-Touch Fitting
SMC
SMC One-Touch fitting.
[Features]
· Compact and lightweight.
· Grease-free.
· Fluid temperature: -5 to 150°C.
· Brass parts: Electroless nickel plated.
[Applications]
· Used to branch line in the same direction.
Days to Ship: | Same day or more |
---|
Show Stock Products
Bulkhead Union Push to Connect Fittings with Buna-N O-Ring, Nylon & Stainless Steel - TF-PTC Series
USA Industrials
Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.
Days to Ship: | 13 Days |
---|
Push to Connect Fittings - Miniature, Union Elbow
MISUMI
Miniature One-Touch Coupling with Applicable Tube O.D. Dia.4~6mm
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Miniature, Union Tee
MISUMI
This is the Miniature One-Touch Coupling.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Miniature, Union
MISUMI
This is the Miniature One-Touch Coupling.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Miniature, Union Y
MISUMI
This is the Miniature One-Touch Coupling.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, Bulkhead Union
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, Union 90° Elbow
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, Union
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Stainless Steel, Tee
MISUMI
All Stainless Steel One-Touch Couplings.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, 90° Union Elbows
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Straight Union
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Tees
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Union Y
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Bulkhead Unions
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Fitting Type: Union, Equal Dia.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Connector
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fitting - Union Tee
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Tees
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Union Straight
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Straight
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Union Elbow
MISUMI
•Application: Standard, Mini
•Union, Equal Dia.: Union Elbows
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Y Type, Union
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
•Compatible Fluid: Air
Days to Ship: | Same day or more |
---|
Show Stock Products
Push to Connect Fittings - Cross Union
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: No Thread
•Seal Material: Nitrile Rubber
•Compatible Fluid: Air
Days to Ship: | 8 Days or more |
---|
Push to Connect Fitting - FY Type Elbow Union
MISUMI
One-Touch Coupling with Applicable Tube O.D. Dia.4~12mm
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Elbow fitting.
Days to Ship: | 9 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Straight fitting
Days to Ship: | Same day or more |
---|
Show Stock Products
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Tee fitting
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type for Clean Environments - Union Elbow
Nihon Pisco
PP resin is used for the main body material, making it ideal for clean environments.
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types available as optional extras.
· Polypropylene or SUS304 can be selected for the screw part.
· No oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Selectable from two packaging specifications--normal packaging and clean room packaging--according to the specific application.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type Union Straight for Clean Environments
Nihon Pisco
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· Polypropylene or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
Brand | Nihon Pisco | Nihon Pisco | Chiyoda | MISUMI | Nitta | MISUMI | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Nitta | Nitta | Nitta | SMC | SMC | SMC | SMC | USA Industrials | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | CKD | CKD | CKD | Nihon Pisco | Nihon Pisco |
Product Series | for Sputtering Resistance, Tube Fitting Brass, Union Y, No Cover | for Sputtering Resistance, Tube Fitting Brass, Bulkhead Union, No Cover | One-Touch Fitting KQ2 Series Union Elbow KQ2L【5-10 Pieces Per Package】 | Bulkhead Male Elbow KQ2LE One-Touch Fitting【5-10 Pieces Per Package】 | Union Elbow KAL Antistatic One-Touch Fitting【10 Pieces Per Package】 | Bulkhead Union Push to Connect Fittings with Buna-N O-Ring, Nylon & Stainless Steel - TF-PTC Series | Tube Fitting Polypropylene Type for Clean Environments - Union Elbow | Tube Fitting Polypropylene Type Union Straight for Clean Environments | |||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 6 Days or more | 15 Days or more | 15 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 7 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 3 Days |
Same day or more
Show Stock Products | 13 Days | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 9 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | - | - | Standard (PBT Polybutylene Terephthalate) | - | Flame Resistant Resin (UL94 V-0 equivalent) | - | Flame Resistant Resin (UL94 V-0 equivalent) | - | Brass | Brass | Brass | Standard (PBT Polybutylene Terephthalate) | PP Resin | Flame Resistant Resin (UL94 V-0 equivalent) | Flame Resistant Resin (UL94 V-0 equivalent) | Standard (PBT Polybutylene Terephthalate) | Standard (PBT Polybutylene Terephthalate) | Standard (PBT Polybutylene Terephthalate) | PP Resin | - | - | - | - | - | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | 316 Stainless Steel | - | - | - | - | - | - | - | - | - | - | - | - | Flame Resistant Resin (UL94 V-0 equivalent) | Flame Resistant Resin (UL94 V-0 equivalent) | Flame Resistant Resin (UL94 V-0 equivalent) | PP Resin | PP Resin |
Seal Material | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | H-NBR | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | - | - | - | - | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | H-NBR | H-NBR | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Fluororubber | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Fluororubber | Fluororubber | Fluororubber | Fluororubber | - | - | - | - | Standard (NBR Nitrile Rubber ) / Fluororubber | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | EPDM Synthetic Rubber |
Thread Portion Material | - | - | No Thread | No Thread | Standard (Brass) | Standard (Brass) | - | - | - | - | - | No Thread | PP Resin | Standard (Brass) | Standard (Brass) | - | - | - | - | - | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | Standard (Brass) | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | No Thread | - | - | - | - | - |
Application | Standard, Mini / Clean Environment | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Standard, Mini | Standard, Mini / Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | - | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Clean Environment | Clean Environment | Clean Environment | Clean Environment | Standard, Mini | Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | - | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related |
Applicable Fluid | Water / Air | Water / Air | Water / Air | Air | Water / Air | Air | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Water / Air | Water / Air | Water / Air | Water / Air | Air | Water / Air | Water / Air | Air | Air | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Water / Air / Chemical, Solvent | Water / Air / Chemical, Solvent | Water / Air / Chemical, Solvent | Water / Air | Water / Air / Chemical, Solvent | Air | Air | Air | Air | Air | Air | Air | Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas |
Fitting Type | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. | Union, Equal Dia. |
Screw Mounting, Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Elbows | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Mounting, Branch | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Union, Equal Dia. | Union Straight | Union Y | Union Straight | Union Tees | Union Straight | Union Straight | Union Y | Union Elbows | Union Y | Partition Unions | Partition Unions | Union Tees | Union Straight | Union Y | Union Y | Union Elbows | Partition Unions | Union Elbows | Union Y | Union Straight | Union Elbows | Union Tees | Union Straight | Union Y | - | Union Elbows | Union Straight | Union Tees | Union Elbows | Union Straight | Union Tees | Union Y | - | - | Union Tees | Union Straight | Union Elbows | - | - | - | Union Elbows | Union Straight | Union Tees | Union Elbows | Union Straight |
Union, Unequal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1(φ) | 4 ~ 16 | 4 ~ 16 | 4 ~ 16 | - | - | - | 6 ~ 12 | 1.8 ~ 6.35 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | - | - | - | 4 ~ 10 | 4 ~ 10 | 6 | 4 ~ 8 | 1/2" ~ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 12 | 4 ~ 10 | 6 ~ 10 | 4 ~ 12 | 4 ~ 12 |
Tube Size 2(φ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy