Push to Connect Fittings（Fitting Type：Union, Equal Dia.）

• 

  Tube Fitting Union T for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Chemical Tube Fitting, Chemical Type, Union Y

  Nihon Pisco

  PPS is used for the main body material, delivering excellent heat resistance, flame retardancy, and chemical resistance.
  
  [Features]
  · The main body uses PPS resin for superior heat resistance, flame retardancy (UL94V-0), and chemical resistance properties.
  · FKM is utilized in the seal.
  · EPDM and NBR types available as optional extras.
  · None of the used parts should be exposed to grease.
  · Also compliant to Food Sanitation Laws of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Available in two packaging specifications--normal packaging and clean room packaging--to fit specific applications.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Union Tee KQ2T One-Touch Fitting【5-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  
  [Features]
  · Improved tube insertion/removal
  · Compact and light weight
  
  [Applications]
  Use to branch tubing at both 90-degree angles.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Union Y for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Rectangular Multi-Connector KDM Series

  SMC

  A one-touch fitting that greatly reduces work time spent on piping.
  [Features]
  · Requires less installation space than when using multiple bulkhead unions for panels.
  · Multiple pipes can be attached and detached in a single action, meaning fewer piping mistakes with much less time needed to be spent on installation work.
  · A multi-connector that helps reduces work loads when shipping panels and machinery separately, or when replacing units due to failure.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  90 Degree Bulkhead Union Elbow Push to Connect Tube Fittings, Nylon

  USA Industrials

  Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.

  Days to Ship:	13 Days

• 

  Push to Connect Fitting - Bulkhead Union

  MISUMI

  •Application: Standard, Mini
  •Union, Equal Dia.: Union Straight
  •Type: One-Touch Couplings
  •Thread Portion Material: C36000 Brass (Brass)
  •Seal Material: Nitrile Rubber

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	9 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Y

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and used in a corrosive atmosphere.
  · Metal body uses special stainless steel with corrosion resistance equivalent to SUS303 (Cr19 – 21%, Mo1.5 – 2.5% stainless).
  · Copper-based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  Touch Connector Five Union T

  Chiyoda

  Low-weight, one-touch fitting with a flame retardant resin. Union Tees.
  
  [Features]
  · Good price-performance by thoroughly reducing materials.
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized, to achieve the ultimate cost performance.
  · Made lightweight by thoroughly reducing materials.
  · Further weight reduction achieved by making body parts all resin.
  · A new lock ring has been adopted.
  · Uses a joint function to perform piping work more smoothly and securely.
  · New ring packing has been adopted.
  · Reduces connection operability while maintaining high air-tightness.
  · Laser marking process on all items.
  · Recorded all the item types on the product.
  · Flame retardant body: Adopts a flame-retardant resin.
  · Screw part sealing (R screw): Can be used for piping as is because the screw part has been sealed.
  · Free use of the upper thread part of screw: the elbow body and screw part can be rotated.
  　* This is not a rotary type. We will not rotate the all-resin type.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• • On Sale Till 07/03/2025

  

  PushOne E Series Union Connector

  Nitta

  No jigs or tools are required for connecting tubes to this union connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  • Volume Discount

  CAD ：

  2D

  	Special Price
  Days to Ship:	Same day or more

  Show Stock Products

• 

  One-Touch Fitting KQ2 Series Straight Union KQ2H【5-10 Pieces Per Package】

  SMC

  A dedicated one-touch fitting used to connect tubing together in the same direction in a single action.
  [Features]
  · A compact and lightweight fitting with improved tube insertion/removal.
  · Both metric size and inch size tubing can be used. Select the most appropriate type for the given application.
  · Requires little force when removing, preventing the chuck from biting too deeply into the tubing.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Release button: oval (pp. 9) / circle (pp. 105)
  · Applicable tube outer diameter (inches), Release button: oval (pp. 33) circle (pp. 138)
  [Applications]
  · Can be used for connecting tubes in the same direction.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  One-Touch Fitting KQ2 Series Union Elbow KQ2L【5-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  
  [Features]
  · Improved tube insertion/removal
  · Compact and lightweight
  
  [Applications]
  Use to connect tubing at right angles.
  
  [See here for the catalog]
  Applicable tube outer diameter (metric), Release button: oval (p. 11) circle (p. 109)
  · Applicable tube outer diameter (inches), Release button: oval (p. 35) circle (p. 141)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Clean Quick-Connect Fitting, KPQ/KPG Series, Elbow, KPQL/KPGL【5-10 Pieces Per Package】

  SMC

  Quick-connect fitting from SMC Corporation.
  [Features]
  ・ Quick-connect fitting suitable for drive train air systems in cleanrooms
  [Applications]
  ・ Used to connect tubes in the right angle direction

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Days or more

• 

  Push to Connect Fittings - Clean Room, Connector

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Chemical Type Union Elbow for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses PPS resin featuring superior heat resistance, flame retardance (UL94V-0) and chemical resistance.
  · FKM is employed in the seal.
  · EPDM and NBR types are available as optional extras.
  · All parts used must not be exposed to grease.
  · Also compliant with the Food Sanitation Laws of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Two packaging specifications are available--normal packaging and clean room packaging--according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Union A for General Piping

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Union Straight for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Sputtering Resistance, Tube Fitting Brass, Bulkhead Union, No Cover

  Nihon Pisco

  [Features]
  · Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
  · Avoids Spatter and Dusts by Optional Protective Cover.
  · HNBR or FKM for Seal Rubber Selection

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and when used in a corrosive atmosphere.
  · Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Touch Connector FUJI Union Tee

  Chiyoda

  [Features]
  · One-touch fitting with rotation lock ring that prevents full rotation of the tube.
  · Reducer union with plastic body.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Union Tee

  Chiyoda

  [Features]
  · Selectable main body material of metal or resin types.
  · Tubing is held by the spring force of "ACTIVE" edge. Most one touch fittings have a passive edge designed to achieve peak holding force only when tubing is pressurized, however the "ACTIVE" edge always holds the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Touch Connector Fuji, H Type, Union Y

  Chiyoda

  [Features]
  · This new fitting has a protection sleeve which prevents weld spatter from adhering around the release level.
  · Most one touch connectors have a plastic release ring only and they are often damaged by weld spatter

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Touch Connector Five, H Type, Union Tee

  Chiyoda

  [Features]
  · Touch Connect FIVE H type utilizes an all-metal main body that is resistant to weld spatter.
  · Metallic spatter cap protects the release ring and guide from weld spatter and also acts as the release ring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Chemifit C1 Series, Union Connector EUC-C1

  Nitta

  The EUC-C1 union connector is thoroughly processed not to use oil. Parts are cleaned and assembled in clean rooms and no oil or grease is used, even on the sealing material.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	7 Days or more

• 

  Junron One-Touch Fitting M Series (for General Piping) Union

  Junkosha

  [Features]
  · Electroless nickel plating is applied to metal parts as standard.
  · The nickel plating in all brass parts of M series nipples and plastic bodies are standardized.
  · Color seal for seal identification.
  · Each of the different types of R (PT) screws are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
  · You can position the body in accordance with the removal direction of the tube.
  ・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
  ▪ The tube grip comes with a rotating mechanism.
  ▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  One-Touch Fitting KQ2 Series Plug-In Elbow KQ2L【1-10 Pieces Per Package】

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and lightweight.
  · Can be used with a vacuum pressure of -100 kPa or more.
  · Body shape: Total of 51 models.
  · Thread part material / surface treatment (with/without): 2 types.
  · Available surface treatment: brass (no plating), brass + electroless nickel plating.
  [Applications]
  · Use to change the tube direction from one-touch fittings by 90 degrees.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Release button: oval (pp. 12) circle (pp. 109)
  · Applicable tube outer diameter (inches), Release button: oval (pp. 36) circle (pp. 141)

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Bulkhead Union KQ2E (Interchangeable With KQ) One-Touch Fitting【5-10 Pieces Per Package】

  SMC

  A one-touch fitting that can be used to connect tubing through a panel.
  [Features]
  · Compact and lightweight with improved tube insertion/removal.
  · The chuck grips the workpiece securely, increasing the tube holding force.
  · Can be used for pressures from a low vacuum up to 1 MPa. The special profile ensures a reliable seal and minimizes resistance when inserting tubes.
  [Applications]
  · Can be used to connect tubing through a panel.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Union Y KQ2U: One-Touch Fitting【5-10 Pieces Per Package】

  SMC

  One-touch fitting by SMC.
  [Features]
  · Improved tube insertion and removal.
  · Compact, lightweight.
  · Can be used in vacuum to -100 kPa.
  [Applications]
  · Use to branch tubing in the same direction.
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Bulkhead Union KQ2E (Interchangeable With KJ), One-Touch Fitting【10 Pieces Per Package】

  SMC

  One-touch fitting used to connect tubing through a panel, etc.
  [Features]
  · Compact, lightweight type with improved tube insertion and removal.
  · Suitable for use with nylon and urethane. The chuck provides secure retention and the collet increases the holding force on the tube.
  · Can be used for a wide range of pressures from a low vacuum up to a pressure of 1 MPa.
  · The use of a special profile ensures sealing and reduces resistance when the tube is inserted.
  · Piping workability can be improved by changing to a face seal structure.
  · When the fitting is removed from the tube, the chuck and collet are released, thus preventing them from biting into the tube excessively.
  [Applications]
  Use to connect two pieces of tubing through a panel, etc.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Straight Union KQB2H Metal One-Touch Fitting

  SMC

  SMC One-Touch fitting.
  
  [Features]
  · Compact and lightweight.
  · Grease-free
  
  [Applications]
  · Used to pipe in the same direction from female thread.
  
  
  

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Bulkhead Union KQB2E Metal One-Touch Fitting

  SMC

  SMC One-Touch fitting.
  [Features]
  · Compact and lightweight.
  · Grease-free.
  · Fluid temperature: -5 to 150°C
  · Brass parts: Electroless nickel plated.
  [Applications]
  · Used to connect tubes through a panel.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tee KQG2T, SUS316 One-Touch Pipe Fitting

  SMC

  SMC One-Touch fitting.
  [Features]
  · Compact and lightweight.
  · Grease-free.
  · Can be used with steam.
  · Metal part: SUS316, Seal part: special FKM.
  · Working fluid temperature: -5 to +150°C
  · Conforms to the Food Sanitation Act of Japan. (Part materials conform to the tool and packaging container standards test.)
  [Applications]
  · Used for branch connection of tubes at 90° on both sides.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Push to Connect Fittings - Miniature, Union Elbow

  MISUMI

  Miniature One-Touch Coupling with Applicable Tube O.D. Dia.4~6mm

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Miniature, Union Tee

  MISUMI

  This is the Miniature One-Touch Coupling.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Miniature, Union

  MISUMI

  This is the Miniature One-Touch Coupling.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Miniature, Union Y

  MISUMI

  This is the Miniature One-Touch Coupling.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Stainless Steel, Bulkhead Union

  MISUMI

  All Stainless Steel One-Touch Couplings.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Stainless Steel, Union 90° Elbow

  MISUMI

  All Stainless Steel One-Touch Couplings.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Stainless Steel, Union

  MISUMI

  All Stainless Steel One-Touch Couplings.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Stainless Steel, Tee

  MISUMI

  All Stainless Steel One-Touch Couplings.

  • Volume Discount
  • Spec Change

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Clean Room, 90° Union Elbows

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Clean Room, Straight Union

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Clean Room, Tees

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Clean Room, Union Y

  MISUMI

  One Touch coupling suitable for clean room environment.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Push to Connect Fittings - Bulkhead Unions

  MISUMI

  •Application: Standard, Mini
  •Type: One-Touch Couplings
  •Thread Portion Material: C36000 Brass (Brass)
  •Fitting Type: Union, Equal Dia.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...