(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
USA Industrials
Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Polybutylene won't absorb moisture, so these fittings are good for water and high-humidity air applications.
Days to Ship: | 13 Days |
---|
Touch Connector Five, Male Branch Y
Chiyoda
[Features]
· TCV is composed of only five components. Fewer-components lower the cost considerably.
· A solid resin body type is available in both male and elbow connector styles.
· A newly designed stainless-steel locking ring assures a complete tube connection
· A newly designed ring backing assures a complete seal.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type Branch Y for Clean Environments
Nihon Pisco
PP resin is used for the main body material, making it ideal for clean environments.
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· Polypropylene or SUS304 can be selected for the screw element.
· EPDM is utilized in the seal. Other options include FKM and NBR.
· Oil-free specifications.
· Plastic body is clear colored to allow water flow to be observed.
· Selectable from two packaging specifications--normal packaging and clean room packaging--depending on the specific application.
Days to Ship: | 11 Days or more |
---|
for General Piping, Tube Fitting Triple Branch A
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting for General Piping - Branch Tee
Nihon Pisco
[Features]
•One-touch fitting for general pneumatic pipe use
•Wide variety of options available
•In-situ adjustment of the resin body take-off angle
•Enables centralized piping
•Light gray and clean room packaged options available
•Fluorinated grease used to meet clean room packaging specifications
•Item is package in an ISO 6 clean room, following purification with clean air
Days to Ship: | 8 Days or more |
---|
Touch Connector Fuji, Single Banjo
Chiyoda
[Features]
· Selectable main body material of metal or resin types.
· One-touch connection and disconnection without tools.
· Color ring accessory can be attached for easier identification.
Days to Ship: | 13 Days or more |
---|
USA Industrials
Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Polybutylene won't absorb moisture, so these fittings are good for water and high-humidity air applications.
Days to Ship: | 13 Days |
---|
3 Run Push to Connect Manifolds with Buna-N O-Ring and Union Ends, Nylon - TF-PTC Series
USA Industrials
Also known as one touch fittings, these tube fittings are designed to slide into the fitting with an internal grasping ring holding it in place. Intended for low pressure applications and for use with plastic and soft metal tubing. Nylon is well suited for air applications.
Days to Ship: | 13 Days |
---|
Push to Connect Fittings - Clean Room, T-Shaped, Stainless Thread
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Clean Room, Union Y, Stainless Thread
MISUMI
One Touch coupling suitable for clean room environment.
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Y Type, Threaded
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Seal Material: Nitrile Rubber
•Compatible Fluid: Air
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Tee, Threaded
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Seal Material: Nitrile Rubber
•Operating Temperature: 0::60
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - 2 Turn Elbow
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Seal Material: Nitrile Rubber
•Compatible Fluid: Air
Days to Ship: | 8 Days or more |
---|
Push to Connect Fittings - Manifold, Double Y-Shaped, Threaded
MISUMI
•Application: Standard, Mini
•Type: One-Touch Couplings
•Thread Portion Material: C36000 Brass (Brass)
•Seal Material: Nitrile Rubber
•Compatible Fluid: Air
Days to Ship: | 8 Days or more |
---|
CKD
Push-in fitting for pneumatic piping. Compact size for space saving. Work environment and device-friendly flame-resistant white body.
Double tee fitting
Days to Ship: | 8 Days or more |
---|
for Clean Environment, Tube Fitting Polypropylene Type, Tee
Nihon Pisco
[Features]
· Polypropylene Material used for Clean Environment
· EPDM used for Rubber Seal.
· Oil-Free
· Visible Fluid by Transparent Body Color.
· Clean-Room packaging Option.
Days to Ship: | 11 Days or more |
---|
for Clean Environment, Tube Fitting Polypropylene Type Tee, Screw Element SUS304
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type Branch Tee for Clean Environments
Nihon Pisco
PP resin is used for the main body material, making it ideal for clean environments.
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· Polypropylene or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Polypropylene Type Branch Tee Thread Part SUS304 for Clean Environments
Nihon Pisco
[Features]
· The main body uses Polypropylene resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· Polypropylene or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.
Days to Ship: | 12 Days or more |
---|
Tube Fitting Polypropylene Type Branch Y for Clean Environments Screw Part SUS304
Nihon Pisco
PP resin is utilized for the main body material, which makes it ideal for clean environments.
[Features]
· The main body utilizes Polypropylene resin, which is suitable for clean environments.
· Polypropylene or SUS304 can be selected for the thread section.
· EPDM is utilized in the seal. Other selectable options include FKM and NBR.
· No oil specification.
· The plastic body is transparent to allow visual observation of the flowing liquid.
· Selectable from two packaging specifications: normal and cleanroom packaging to match the specific application.
Days to Ship: | 8 Days or more |
---|
Chemical Tube Fitting, Chemical Type Tee
Nihon Pisco
PPS is used for the main body material, delivering excellent heat resistance, flame retardancy, and chemical resistance.
[Features]
· The main body uses PPS resin for superior heat resistance, flame retardancy (UL94V-0), and chemical resistance properties.
· FKM is utilized in the seal.
· EPDM and NBR types available as optional extras.
· None of the used parts should be exposed to grease.
· Also compliant to Food Sanitation Laws of Japan (FKM type only).
· No need to worry about rust or metal ions.
· Available in two packaging specifications--normal packaging and clean room packaging--to fit specific applications.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Double Branch A for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Double Universal Elbow for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Triple Universal Elbow for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
General Plumbing Tube Fitting Tripod Elbow
Nihon Pisco
A rich assortment of one-touch fittings for general piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Various lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is enabled.
· Triple type (PKD, PKG, and PKJ) and triple-double type (PKVD and PKVG) enables compact centralized piping.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch A for Standard Pipe
Nihon Pisco
Many types of one-touch fittings for standard piping.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Diverse lineup.
· Centralized piping is supported
Days to Ship: | 8 Days or more |
---|
Tube Fitting for General Piping - Branch Elbow
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
for General Piping, Tube Fitting Branch Triple
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Various products available.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is enabled.
· Light gray types, and clean room packaged types optionally available.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Double Branch Triple Double for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting for General Piping - Branch Y
Nihon Pisco
[Features]
· Single-action fitting for general pneumatic pipes.
· An extensive lineup of products.
· After mounting, the resin unit's removal angle can be changed.
· Allows for centralized piping.
· Light gray types, and clean room packaged types also available.
· Clean room packaging specifications use fluorinated grease for the grease.
· After being purified with clean air, the item is packaged in an ISO Class 6-equivalent clean room.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Double Y for General Piping
Nihon Pisco
Several types of one touch fittings for general piping are available.
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· Can change the take-off angle of the resin body after mounting.
· Centralized piping is supported.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Tube Fitting Branch Female Branch A for General Piping
Nihon Pisco
[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
for General Piping, Tube Fitting Mini-Type Tee
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 6 Days or more |
---|
for General Piping, Tube Fitting Mini-Type Branch Tee
Nihon Pisco
[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and the like.
· Light gray types, and clean room packaged types are available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.
Days to Ship: | 8 Days or more |
---|
Anti-Static Tube-Fitting EG Tee
Nihon Pisco
Optimal for lines requiring static electricity dissipation and anti-static performance.
Days to Ship: | 14 Days or more |
---|
for Sputtering Resistance, Tube Fitting Sputtering, Tee
Nihon Pisco
[Features]
· Flame-Retardant Resin. Resistant to Flame and Weld Spatter. (Equivalent to V-0).
· Release-Ring Cover prevents malfunction of Release-Ring due to the weld spatter.
Days to Ship: | 14 Days or more |
---|
Tube Fitting Brass T for Sputter Resistance
Nihon Pisco
The main body and release ring are made of brass for superior flame retardance and sputtering resistance.
[Features]
· Available sealing rubber materials include HNBR, FKM, and NBR.
· Ideal for environments where exposure to sparks may occur.
· Release ring made of brass offers excellent flame retardance and sputter resistance.
Cover type prevents sputtering inside the fitting and dust intrusion.
· An optional spatter cover shuts out fine sparks.
· By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close
Days to Ship: | 15 Days or more |
---|
for Sputtering Resistance, Tube Fitting Brass Tee, No Cover
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 15 Days or more |
---|
for Sputtering Resistance, Tube Fitting Brass, Branch Tee
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 15 Days or more |
---|
for Sputtering Resistance, Tube Fitting Brass Branch Tee, No Cover
Nihon Pisco
[Features]
· Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
· Avoids Spatter and Dusts by Optional Protective Cover.
· HNBR or FKM for Seal Rubber Selection
Days to Ship: | 15 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Tee
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304,
Days to Ship: | 14 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Tripod Elbow
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304,
Days to Ship: | 14 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Branch Elbow
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304,
Days to Ship: | 14 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Branch Tee
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304.
Days to Ship: | 14 Days or more |
---|
for Corrosion Resistance, SUS304 Fitting, Branch Triple
Nihon Pisco
[Features]
· This tube fitting serves best where strength is required or the atmosphere contains chemicals.
· Seal material is made of FKM.
· Metal unit is made of SUS304.
Days to Ship: | 14 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Type |
Body Material |
Seal Material |
Thread Portion Material |
Application |
Applicable Fluid |
Fitting Type |
Screw Mounting, Direction |
Elbows |
Screw Mounting, Branch |
Union, Equal Dia. |
Union, Unequal Dia. |
Sockets, Reducers |
For Swivel Part, Rotation Part |
Other Shapes |
Branch A |
Tube Size 1(φ) |
Tube Size 2(φ) |
Brand | USA Industrials | Chiyoda | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | USA Industrials | USA Industrials | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | CKD | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Tube Fitting Polypropylene Type Branch Y for Clean Environments | 3 Run Push to Connect Manifolds with Buna-N O-Ring and Union Ends, Nylon - TF-PTC Series | Push to Connect Fittings - Clean Room, T-Shaped, Stainless Thread | Push to Connect Fittings - Clean Room, Union Y, Stainless Thread | Push to Connect Fittings - Manifold, Double Y-Shaped, Threaded | for Clean Environment, Tube Fitting Polypropylene Type Tee, Screw Element SUS304 | Tube Fitting Polypropylene Type Branch Tee for Clean Environments | Tube Fitting Polypropylene Type Branch Tee Thread Part SUS304 for Clean Environments | Tube Fitting Polypropylene Type Branch Y for Clean Environments Screw Part SUS304 | Tube Fitting Branch Double Universal Elbow for General Piping | Tube Fitting Branch Triple Universal Elbow for General Piping | Tube Fitting Branch Double Branch Triple Double for General Piping | for Sputtering Resistance, Tube Fitting Brass Branch Tee, No Cover | ||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
Days to Ship | 13 Days | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 13 Days | 13 Days | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more | 14 Days or more | 14 Days or more | 15 Days or more | 15 Days or more | 15 Days or more | 15 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more | 14 Days or more |
Specifications |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
Type | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings | One-Touch Couplings |
Body Material | - | Standard (PBT Polybutylene Terephthalate) | PP Resin | - | - | Others | - | - | - | - | - | - | - | - | Flame Resistant Resin (UL94 V-0 equivalent) | PP Resin | PP Resin | PP Resin | PP Resin | PP Resin | PPS Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | Static Dissipation Resin | Flame Resistant Resin (UL94 V-0 equivalent) | Brass | Brass | Brass | Brass | - | - | - | - | - |
Seal Material | - | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | - | - | Standard (NBR Nitrile Rubber ) | - | - | - | - | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | Standard (NBR Nitrile Rubber ) | EPDM Synthetic Rubber | EPDM Synthetic Rubber | EPDM Synthetic Rubber | EPDM Synthetic Rubber | EPDM Synthetic Rubber | EPDM Synthetic Rubber | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Portion Material | - | Standard (Brass) | PP Resin | - | - | Standard (Brass) | - | - | - | - | Standard (Brass) | Standard (Brass) | Standard (Brass) | Standard (Brass) | Standard (Brass) | PP Resin | - | PP Resin | - | - | PPS Resin | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Application | - | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Standard, Mini | Standard, Mini | Standard, Mini | - | - | Clean Environment | Clean Environment | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related | Clean Environment / Food, Pharmaceutical Related / Heat Resistant | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Standard, Mini | Static DissipationAntistatic | Sputter Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Static DissipationAntistatic / Sputter Resistant / Heat Resistant | Standard, Mini / Food, Pharmaceutical Related | Standard, Mini / Food, Pharmaceutical Related | Standard, Mini / Food, Pharmaceutical Related | Standard, Mini / Food, Pharmaceutical Related | Standard, Mini / Food, Pharmaceutical Related |
Applicable Fluid | Water / Air | Water / Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent | Water / Air / Chemical, Solvent | Air | Air | Air | Air | Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Air | Air | Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas | Water / Air / Chemical, Solvent / Mixed Gas |
Fitting Type | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch | Screw Mounting, Branch |
Screw Mounting, Direction | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Elbows | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Screw Mounting, Branch | - | Branch Y | Branch Y | Branch A | Branch Tees | Tee | - | - | - | - | - | - | - | - | Tee | Tee | Tee | - | - | Branch Y | Tee | Branch A | Double Universal Elbows | Triple Universal Elbows | Tripod Elbows | Branch A | Branch Elbows | Branch Triple | Branch triple double | Branch Y | Branch Double Ys | Branch A | Tee | - | Tee | Tee | Tee | Tee | - | - | Tee | Tripod Elbows | Branch Elbows | - | Branch Triple |
Union, Equal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Union, Unequal Dia. | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Sockets, Reducers | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
For Swivel Part, Rotation Part | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Other Shapes | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Branch A | - | - | - | Triple Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Double Branch A | - | - | - | - | - | - | - | - | - | Female Branch A | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1(φ) | 1/2" ~ 3/8" | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3.97 ~ 16 | 4 ~ 12 | 1/2" ~ 12 | 1/2" ~ 12 | - | - | - | - | - | - | 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 10 | 8 ~ 10 | 3.97 ~ 16 | 4 ~ 6 | 4 ~ 12 | 1.8 ~ 6.35 | 1.8 ~ 6.35 | 3 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 4 ~ 12 | 4 ~ 12 | 4 ~ 16 | 6 ~ 10 |
Tube Size 2(φ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 4 ~ 8 | 4 ~ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Applicable Tube O.D.1>2>3
Applicable Tube O.D.1>2>3
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy