(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Connector - Straight, Compression Fittings, 316SS, N Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 8 Days or more |
---|
SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
Days to Ship: | 3 Days |
---|
90° Elbows - Compression Fittings, 316SS, NSL Series
Nihon Pisco
All materials use SUS316 for excellent rust resistance.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Compression Fittings, 316SS, NSC Series
Nihon Pisco
SUS316 is used to provide all materials with excellent corrosion resistance.
[Features]
· SUS316 is used to provide all materials with excellent corrosion resistance.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· Air cleaned and packaged in a Class 1000 clean room .
· Added inch sizes.
· Improved selection.
Days to Ship: | Same day or more |
---|
Show Stock Products
Washer - Disc Spring, Compression Fittings, 316SS, NSP Series【1-2 Pieces Per Package】
Nihon Pisco
All parts made of SUS316 to provide excellent corrosion resistance. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Compression Fittings, 316SS, L Series
Junkosha
Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Tees - Compression Fittings, 316SS, NSB Series
Nihon Pisco
All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Tees - Compression Fittings, 316SS, NSD Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, NSCF Series
Nihon Pisco
Totally made of corrosion-resistant SUS316.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Bulkhead, Compression Fittings, 316SS, NSMF Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Compression Fittings, 316SS, NSV Series
Nihon Pisco
All materials use SUS316 for good corrosion resistance.
[Features]
- All materuals use SUS316 for superior corrosion resistance.
- No sleeve needed, ensuring you won't lose it or forget to attach it.
- Purified with clean air and packaged in a Class 1000 clean room.
- Inch sizes added.
- Wide selection of variations.
Days to Ship: | 8 Days or more |
---|
Union - Straight, Compression Fittings, 316SS, NSU Series
Nihon Pisco
All materials use SUS316 to provide excellent rust resistance. *The CAD data for this series is being revised. Data will be available as soon as modifications are complete.
[Features]
· SUS316, a substance with superior corrosion resistance, was used for all parts.
· Forgetting to attach and losing a sleeve never happens with the no-sleeve-required design.
· Purified with clean air and packaged in a Class 1000 clean room .
· Added inch sizes.
· Wide selection of products
Days to Ship: | 8 Days or more |
---|
Tees - Union, Compression Fittings, 316SS, NSE Series
Nihon Pisco
All materials use SUS316 to provide excellent rust resistance. *CAD data currently being revised for this series. This will be available as soon as modifications are complete.
[Features]
· SUS316, a substance with superior corrosion resistance, was used in all of the materials.
· The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
· For chemistry applications, medical applications, chemical applications, and food applications.
· Purified with clean air and packaged in a clean room (Class 1000).
· Added inch sizes.
· Wider variety of products available.
Days to Ship: | 8 Days or more |
---|
Cap - Compression Fittings, 316SS, NSN Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | 13 Days or more |
---|
Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Socket - Bulkhead, Compression Fittings, 316SS, NSMF Series
Nihon Pisco
All materials use SUS316 to provide excellent corrosion resistance.
[Features]
· SUS316, a substance with superior corrosion resistance, was used in all of the materials.
· The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
· Purified with clean air and packaged in a Class 1000 clean room.
· Added inch sizes.
· Wide selection of products.
Days to Ship: | 8 Days or more |
---|
Connector - Bulkhead, Compression Fittings, 316SS, NSM Series
Nihon Pisco
All materials use SUS316 to provide excellent corrosion resistance.
[Features]
· SUS316, a substance with superior corrosion resistance, was used in all of the materials.
· The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
· Purified with clean air and packaged in a Class 1000 clean room.
· Added inch sizes.
· Wide selection of products.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, M Series
Chiyoda
Full decreasing treatment for cleanliness. Male connectors.
Days to Ship: | 13 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, ML Series
Chiyoda
Full decreasing treatment for cleanliness. Male elbows.
Days to Ship: | 13 Days or more |
---|
Union - Compression Fittings, 316SS, U Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 12 Days or more |
---|
Tees - Compression Fittings, 316SS, TU Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nuts, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 12 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, LU Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over tightening of cap nut and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Tees - Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 12 Days or more |
---|
Tees - Service, Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
[Features]
· As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
· Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
· No abnormalities are allowed in the connected part unless the tube ruptures.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it is rust resistant.
Days to Ship: | 14 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, FN Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Union - Bulkhead, Compression Fittings, 316SS, FC Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.
Days to Ship: | 12 Days or more |
---|
Union - Bulkhead, Compression Fittings, 316SS, PUS Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 12 Days or more |
---|
Union - Bulkhead, Compression Fittings, 316SS, PUN Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 12 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, LA Series
Junkosha
Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Flexible Tube Style, N Series
Junkosha
[Features]
▪ Stainless steel fittings for flexible tubing.
▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
· Tightening torque of the cap nut does not need to be managed.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Flexible Tube Style, L Series
Junkosha
Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Union - Flexible Tube Style, U Series
Junkosha
Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, cap nuts built into the sleeve that use the unique Junkosha mechanism are employed. The cap nut tightening torque does not require management.
Days to Ship: | 14 Days or more |
---|
Tees - Union, Flexible Tube Style, TU Series
Junkosha
Stainless steel fittings for flexible tubing. To resolve tube twisting during piping, we use cap nuts built into the sleeve that use a unique Junkosha mechanism. Does not require management of cap nut tightening torque.
Days to Ship: | 14 Days or more |
---|
Connector - Straight, Quick Seal, 304SS, C4N Series
Nitta
A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Demonstrate excellent sealing performance.
· Fitting body and insert are integrated.
· Also has excellent performance with negative pressure.
· Made of SUS304 for excellent corrosion resistance.
· Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, 304SS, L4N Series
Nitta
A 3-point stainless steel 90° elbow (millimeter sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, 304SS, UL4N Series
Nitta
Stainless steel 90° union elbow (mm size) consisting of three parts: fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.
Days to Ship: | 10 Days or more |
---|
Tees - Union, Quick Seal, 304SS, UT4N Series
Nitta
Stainless steel union tee (metric sized) that comes as a set of 3 items: Fitting body, nut, and sleeve. The fitting body and insert are integrated. Also shows superb performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Nut - Quick Seal, 304SS, N Series
Nitta
Consists of three parts: a stainless steel nut/fitting main body, a nut, and a sleeve.
[Features]
· Screw-in type.
· A fitting main body, nut, and sleeve three-piece type.
· Demonstrates a strong sealing performance.
· The fitting main body and insert are integrated.
· A fitting with a superior negative-pressure performance.
· Made of SUS304. Therefore, it is strongly resistant to corrosion.
· A product that is compliant with JIS B 8381-1995 (Pneumatic system -- Flexible tubes -- Tube fittings).
Days to Ship: | 7 Days or more |
---|
90° Elbows - Quick Seal, Insert Type, 304SS, L1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Connector - Union, Quick Seal, Insert Type, 304SS, UC1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Tees - Union, Quick Seal, Insert Type, 304SS, UT1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 10 Days or more |
---|
Nut - Assembly, Chemifit, CSA Series【5 Pieces Per Package】
Nitta
The insert is integrated with the fitting unit, and sleeves are built into the assembly nuts, enabling the reuse of both components. Moreover, excellent durability is achieved by adopting the manufacturer's unique sealed structure.
[Features]
· A screw-in type fitting made of SUS316.
▪ Consists of two parts: assembly nut and a fitting unit that use the manufacturer's own unique structure.
· Greatly improves usability in terms of mounting and removing tubes.
▪ The fitting unit and insert are integrated. Sleeves are built in to the assembly nuts.
▪ The fitting unit and assembly nut both can both be reused.
· Uniform tube attachment.
Tubes are connected when the assembly nut reaches the fitting unit. No need for torque control or special tools.
▪ The sleeves inside the assembly nuts can rotate and as such the tube does not.
· A completely oil-free product.
▪ Assembled after cleaning each part in a clean room.
▪ The manufacturer's original sealing structure offers high durability against any degradation to sealing performance in cold and hot cycles.
▪ The structure succumbs to little in the way of stress relaxation, ensuring a high sealing performance over long periods of time and ensuring that the nut does not need to be re-tightened during maintenance.
▪ The surface coarseness is Ra3.2 or less. The 90° corner of the elbow has been made smooth and rounded, reducing the amount of liquid and detergent that remains.
▪ Prevents the fitting unit and assembly nut from seizing when a tube is inserted.
Days to Ship: | 10 Days or more |
---|
Bushing - Chemifit, CSA Series
Nitta
The CSA series is a screw-in fitting made of SUS316. Drastically improved build and durability against degraded sealing performance; no assembly nut re-torquing required during maintenance.
Days to Ship: | 8 Days or more |
---|
SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
Days to Ship: | Same day or more |
---|
Show Stock Products
Brand |
---|
Product Series |
CAD |
Days to Ship |
Connection Types |
Thread-to-Tube Connection Shape |
Tube-to-Tube Connection Shape |
Thread-to-Tube Multipoint Connection Shape |
Related Components, Shapes, Types |
Material |
Surface Treatment |
Thread Types |
Thread Size 1 |
Tube Size 1 |
Tube Size 2 |
Tube Inner Dia.(mm) |
Brand | Junkosha | SMC | Nihon Pisco | Nihon Pisco | Nihon Pisco | Junkosha | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | SMC |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L【2 Pieces Per Package】 | Connector - Straight, Compression Fittings, 316SS, NSC Series | Washer - Disc Spring, Compression Fittings, 316SS, NSP Series【1-2 Pieces Per Package】 | Connector - Straight, Compression Fittings, 316SS, NSCF Series | Connector - Bulkhead, Compression Fittings, 316SS, NSMF Series | Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series | Connector - Bulkhead, Compression Fittings, 316SS, NSM Series | Connector - Straight, Compression Fittings, 316SS, FN Series | Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series | Connector - Union, Quick Seal, Insert Type, 304SS, UC1N Series | SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Days to Ship | 8 Days or more | 3 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 14 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 14 Days or more | 14 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Connection Types | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Related Components | Thread to Tube Connection | Related Components | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Tube to Tube Equal Dia. Connection | Related Components | Related Components | Thread to Tube Connection |
Thread-to-Tube Connection Shape | Male Straight | Elbows | Elbows | Male Straight | - | Elbows | - | - | Female Straight | Female Straight | - | - | - | - | Male Straight | - | - | Male Straight | Elbows | - | - | - | - | - | Female Straight | Female Straight | - | Male Straight | Elbows | Male Straight | Elbows | - | - | Male Straight | Elbows | - | - | - | Elbows | Male Straight | - | - | - | - | Male Straight |
Tube-to-Tube Connection Shape | - | - | - | - | - | - | - | - | - | - | Elbows | Straight | Tees | - | - | - | Partition Unions | - | - | Straight | Tees | Elbows | - | - | - | - | Partition Unions | - | - | - | - | Straight | Tees | - | - | Elbows | Tees | - | - | - | Straight | Tees | - | - | - |
Thread-to-Tube Multipoint Connection Shape | - | - | - | - | - | - | Tees | Tees | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Tees | Tees | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Related Components, Shapes, Types | - | - | - | - | Gaskets | - | - | - | - | - | - | - | - | Nuts | - | Sockets | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Nuts | - | - | - | - | Nuts | Bushings | - |
Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
Thread Types | R | R | R | R | - | R | R | R | Rc | Rc | - | - | - | - | R | Rc | - | R | R | - | - | - | R | R | Rc | Rc | - | R | G | R | R | - | - | R | R | - | - | M | R | R | - | - | - | Rc | NPT ~ R |
Thread Size 1 | 1/2 ~ 3/8 | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | - | - | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | - | - | 1/4 ~ 3/8 | 1/4 ~ 1/8 | 1/4 ~ 1/8 | 1/2 ~ 3/8 | - | 1/2 ~ 3/8 | 1/4 ~ 1/8 | 1/4 ~ 1/8 | 1/4 | - | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | - | M10 ~ M17 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | - | - | 1/4 ~ 3/8 | 1/4 ~ 1/8 |
Tube Size 1 | 3.18 mm ~ 16 mm | - | 4 mm ~ 16 mm | 4 mm ~ 16 mm | - | 3.18 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | - | 4 mm ~ 16 mm | 4 mm ~ 12 mm | 4 mm ~ 12 mm | 6 mm ~ 8 mm | 6 mm ~ 12 mm | 6 mm ~ 10 mm | 6 mm ~ 10 mm | 6 mm ~ 8 mm | 4 mm ~ 8 mm | 4 mm ~ 12 mm | 10 mm ~ 12 mm | 4 mm ~ 12 mm | 4 mm ~ 8 mm | 4 mm ~ 12 mm | 8 mm | 10 mm | 12 mm | 6 ~ 12 | 6 ~ 12 | 6 ~ 12 | 6 ~ 10 | 6 ~ 12.7 | 6.35 ~ 12.7 | 6.35 ~ 12.7 | 6.35 ~ 12.7 | 6.35 ~ 9.53 | 6 ~ 12 | - | 6 ~ 6.35 |
Tube Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Inner Dia.(mm) | 1.65 ~ 13 | - | 2 ~ 13 | 2 ~ 13 | - | 1.65 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2.5 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | - | 2 ~ 13 | 2 ~ 10 | 2 ~ 10 | 4 ~ 6 | 4 ~ 9 | 4 ~ 8 | 4 ~ 7.5 | 4 ~ 6 | 2.5 ~ 6 | 2 ~ 10 | 7.5 ~ 9 | 2 ~ 10 | 2.5 ~ 6 | 2.5 ~ 8 | 5 | 6.5 | 8 | 4 ~ 9 | 4 ~ 9 | 4 ~ 9 | 4 ~ 6.5 | - | - | - | - | - | - | - | 2.5 ~ 4 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy