Compression Fittings（Thread-to-Tube Multipoint Connection Shape：Tees）

• 

  Self-Align Fittings H/DL/L/LL Series Male Branch Tee DT【10 Pieces Per Package】

  SMC

  Self-aligning pipe fittings by SMC Corporation.
  [Features]
  ・ It can be used with flexible copper pipes
  ·Non-directional metal sleeve
  ・ A sleeve that is resistant to external damage
  ・ Low pressure loss
  [Applications]
  ・ Used for branch piping from female thread section in the 90 degree direction on both sides

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Insert Fittings KF Series, Branch Tee KFT【1-10 Pieces Per Package】

  SMC

  Used for branch connections proceeding at 90° angles from female threads on both sides.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Days or more

• 

  Self-Align Fittings H/DL/L/LL Series Male Run Tee DY【10 Pieces Per Package】

  SMC

  Self-aligning type pipe fittings by SMC Corporation.
  [Features]
  · Can be used with soft copper pipes.
  · A non-directional type metal sleeve.
  · The sleeve helps protect against external damage.
  · Low pressure loss.
  [Applications]
  · Used for 90° branch connections in both directions.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Insert Fittings KF Series, Male Run Tee KFY【1-10 Pieces Per Package】

  SMC

  Used for branching pipework proceeding in the same direction and at a 90° angle from a female thread.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	3 Days or more

• 

  Tees - Quick Seal, Insert-Less, Brass, 4A03 Series

  Nitta

  Three parts: tee fitting body, nut, and sleeve. The effective sectional area is larger without insert.
  
  [Features]
  · Screw-in type.
  · Three parts: fitting body, nut, and sleeve.
  · High flow rate can be secured.
  · It has no insert, making its effective cross-section greater.
  · Only connectors are sealed.
  · Does not require sealing tape.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	9 Days or more

• 

  Tees - Compression Fittings, 316SS, NSB Series

  Nihon Pisco

  All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Compression Fittings, 316SS, NSD Series

  Nihon Pisco

  All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Compression Fittings, PTA Series

  Junkosha

  Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Tees - Service, Compression Fittings, PTB Series

  Junkosha

  Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Tees - Compression Fittings, 316SS, TA Series

  Junkosha

  Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	12 Days or more

• 

  Tees - Service, Compression Fittings, 316SS, TA Series

  Junkosha

  Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
  
  [Features]
  · As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
  · Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
  · No abnormalities are allowed in the connected part unless the tube ruptures.
  · The tightening torque of the cap nut does not need to be managed.
  Fitting uses SUS316, so it is rust resistant.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	14 Days or more

• 

  Tees - Quick Seal, Brass, T4N Series

  Nitta

  Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
  
  [Features]
  · Screw-in type.
  · Three parts included: fitting body, nuts and sleeve(s).
  · Demonstrates excellent sealing performance.
  · Fitting body and insert are integrated.
  · Also features excellent performance under negative pressure.
  · Only the connectors are sealed.
  · Does not require sealing tape.
  Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Quick Seal, Brass, ST4N Series

  Nitta

  It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Quick Seal, DK Type, Brass, DT6 Series

  Nitta

  [Features]
  · Screw-in type.
  · 3 parts: fitting body, nut and sleeve.
  · Fittings dedicated to DK tubes.
  · Only connectors are sealed.
  · Does not require sealing tape.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Quick Seal, Insert Type, Brass, ST1N Series

  Nitta

  A 3-point brass service tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Quick Seal, Insert Type, Brass, T1N Series

  Nitta

  A 3-point brass swivel tee (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tees - Service, Chemifit, CP Series【5 Pieces Per Package】

  Nitta

  · The inner surface of the service tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	10 Days or more

• 

  Tees - Chemifit, CP Series【5 Pieces Per Package】

  Nitta

  · The inner surface of the tee is smooth due to injection molding. Features excellent dust-free and pollution-free characteristics. A special polypropylene resin is used as a base material.
  
  [Features]
  · Screw-in type fitting made of polypropylene resin.
  · Lightweight.
  · Completely oil-free treated product.
  · Parts are cleaned in a clean room.
  ･ Excellent inner surface smoothness.
  · Inner surface is smooth due to injection molding.
  · Features excellent dust-free and pollution-free characteristics.
  · Special polypropylene resin is used as a material.
  · Complies with Ministry of Health, Labour and Welfare Notification 201 (2006) and Ministry of Health, Labour and Welfare Notification 370 (1956)

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  SUS316 Insert Fittings KFG2 Series, Branch Tee KFG2T【2 Pieces Per Package】

  SMC

  [Features]
  · Compact, lightweight.
  · Grease-free.
  · Can be used with steam.
  · Conforms to the Food Sanitation Act of Japan.
  [Please refer to the following pages of the catalog]
  · Applicable tube outer diameter: metric p. 324, inches p. 329

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Quote

• 

  Tees - Branch, Compression Fittings, Zinc-Plated Steel

  USA Industrials

  Male Branch Tee Tube Fittings Compression fittings have a single sleeve which bites into tubing as you tighten the nut to create a strong seal. Zinc-plated steel is strong and has fair corrosion resistance.

  Days to Ship:	13 Days

• 

  Tees - Run, Compression Fittings, N2606 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Run, Compression Fittings, N2605 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Branch, Compression Fittings, N2602 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Branch, Compression Fittings, N2601 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Instrumentation Tube Fittings, Brass

  USA Industrials

  Union Tee Compression fittings have a single sleeve which bites into tubing as you tighten the nut to create a strong seal. Compression fittings with two sleeves are known as instrumentation fittings and provides better gripping power for higher pressure applications. Brass has a high temperature tolerance.

  Days to Ship:	13 Days

Loading...