(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Connector - Straight, Compression Fittings, PN Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
The tube insert allows for secure connection of a sleeve and a cap nut.
With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Brass, FC4N Series
Nitta
A brass female connector (millimeter sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, N Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, Insert Type, Brass, L1N1 Series
Nitta
A brass 90° elbow (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 7 Days or more |
---|
Sleeve - Quick Seal, Nylon, SN Series【1-20 Pieces Per Package】
Nitta
Composed of three components: fitting body of the nylon sleeve, nut, and sleeve. The fitting body and insert are integrated. Also shows excellent performance at negative pressures.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Chemifit, CP Series【5 Pieces Per Package】
Nitta
A threaded union elbow for piping clean air, pure water, and chemicals.
Days to Ship: | 8 Days or more |
---|
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series
Nitta
A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 7 Days or more |
---|
SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
Days to Ship: | 3 Days |
---|
Couplings for Tubes - Straight
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Compression Fittings, 316SS, NSL Series
Nihon Pisco
All materials use SUS316 for excellent rust resistance.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Compression Fittings, 316SS, NSC Series
Nihon Pisco
SUS316 is used to provide all materials with excellent corrosion resistance.
[Features]
· SUS316 is used to provide all materials with excellent corrosion resistance.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· Air cleaned and packaged in a Class 1000 clean room .
· Added inch sizes.
· Improved selection.
Days to Ship: | Same day or more |
---|
Show Stock Products
Washer - Disc Spring, Compression Fittings, 316SS, NSP Series【1-2 Pieces Per Package】
Nihon Pisco
All parts made of SUS316 to provide excellent corrosion resistance. *The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Hose Fittings, M Series
Chiyoda
A hose nipple with high pull-out strength.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Tube Fittings, Male BSPT, Brass, BML Series
Koyo
Uses cadmium-free brass material.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Compression Fittings, PL Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
Cone - Compression Fittings, Plastic, S Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
Cap Nut - Compression Fittings, Brass, UN Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insertwith the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
Union - Compression Fittings, Brass, PU Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 for pneumatic fittings. The mechanism clamps on to the tube insert with the sleeve and the cap nut for a reliable connection. With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, L Series
Junkosha
Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Brass, C4N Series
Nitta
It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Quick Seal, Brass, UL4N Series
Nitta
The fitting main body and insert are integral at three points: sleeve, nut, and fitting main body of the 90° union (mm size) with brass specifications. Excellent negative pressure performance.
[Features]
· The tube is connected by PushOne®.
· No need for jigs nor tools to connect the tube.
· Electroless nickel plated.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· Flame-retardant resin (equivalent to UL94 V-0 standard) adopted.
· Non-combustible PBT resin is used for the materials.
· Equivalent to UL94 V-0 standard, with superior self-extinguishing properties.
· Can be used in environments in which sputtering occurs.
· The R screws are sealed, and thus there is no need to wrap them with sealing tape.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Swivel, Quick Seal, Brass, SC4N Series
Nitta
Brass specifications swivel nut female connector with fitting body (mm size), nut, and sleeve.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Demonstrates excellent sealing performance.
· Fitting body and insert are integrated.
· Also has excellent performance with negative pressure.
· Only connectors are sealed.
· Does not require sealing tape.
JISB8381-1995 (flexible hose pipe fittings for pneumatic use) compliant product.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, DK Type, Brass, DL6 Series
Nitta
90° elbow consisting of three parts: fitting body, nut and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Fitting for dedicated use with DK tubes.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
Nut - Chemifit, CP Series【5 Pieces Per Package】
Nitta
Injection-molded for a smooth interior. Also, it excels in minimizing dust and vision. A special polypropylene resin is used as a base material.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, Zinc-Plated Steel
USA Industrials
Compression fittings have a single sleeve which bites into tubing as you tighten the nut to create a strong seal. Zinc-plated steel is strong and has fair corrosion resistance.
Days to Ship: | 13 Days |
---|
90° Elbows - Compression Fittings, Zinc-Plated Steel
USA Industrials
Male Elbow Compression fittings have a single sleeve which bites into tubing as you tighten the nut to create a strong seal. Zinc-plated steel is strong and has fair corrosion resistance.
Days to Ship: | 13 Days |
---|
90° Elbows - Instrumentation Tube Fittings, Male BSPP, Brass
USA Industrials
Male-Male Elbow Compression fittings have a single sleeve which bites into tubing as you tighten the nut to create a strong seal. Compression fittings with two sleeves are known as instrumentation fittings and provides better gripping power for higher pressure applications. Brass is a durable material with good corrosion resistance.
Days to Ship: | 13 Days |
---|
Couplings for Tubes - Half Union
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Couplings for Tubes - Half Union, 90 Degree Elbow
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Couplings for Tubes - Union Tees
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Couplings for Tubes - 90 Deg. Elbow
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Couplings for Tubes - Panel Mount
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
Couplings with Tube Insert - Connector
MISUMI
Couplings with Insert intended to avoid the tube from falling off and generating leakage
Days to Ship: | Same day or more |
---|
Show Stock Products
Couplings with Tube Insert - 90 Deg. Elbow
MISUMI
Couplings with Insert intended to avoid the tube from falling off and generating leakage
Days to Ship: | Same day or more |
---|
Show Stock Products
Couplings with Tube Insert - Union, 90 Degree Elbow
MISUMI
Couplings with Insert intended to avoid the tube from falling off and generating leakage
Days to Ship: | 8 Days or more |
---|
Couplings with Tube Insert - Union Connector
MISUMI
Couplings with Insert intended to avoid the tube from falling off and generating leakage
Days to Ship: | 8 Days or more |
---|
Couplings with Tube Insert - Union Tee
MISUMI
Couplings with Insert intended to avoid the tube from falling off and generating leakage
Days to Ship: | 8 Days or more |
---|
Couplings for Tubes - Union, 90 Degree Elbow
MISUMI
Couplings for Tubes which have the sleeve and nut consolidated into one
Days to Ship: | 8 Days or more |
---|
90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKCF Series
Nihon Pisco
A special brass is used for the metal body. Resistance to water corrosion is greatly improved. *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Special brass is used for the metal body.
· The resistance to water corrosion is greatly improved.
· Optimally suited to the automobile industry and adjusting mold temperatures.
· A sleeve-less design. Therefore, forgetting to attach or losing sleeves will never happen again. Suitable for a wide range of various applications.
Days to Ship: | 13 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Connection Types |
Thread-to-Tube Connection Shape |
Tube-to-Tube Connection Shape |
Thread-to-Tube Multipoint Connection Shape |
Related Components, Shapes, Types |
Material |
Surface Treatment |
Thread Types |
Thread Size 1 |
Tube Size 1 |
Tube Size 2 |
Tube Inner Dia.(mm) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | Junkosha | Nitta | Junkosha | Nitta | Nitta | Nitta | MISUMI | Nitta | SMC | MISUMI | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Koyo | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Nitta | Nitta | Nitta | Nitta | Nitta | USA Industrials | USA Industrials | USA Industrials | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nihon Pisco | Nihon Pisco |
Product Series | Sleeve - Quick Seal, Nylon, SN Series【1-20 Pieces Per Package】 | Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series | SUS316 Insert Fittings KFG2 Series, Union Elbow KFG2L【2 Pieces Per Package】 | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series | Connector - Straight, Compression Fittings, 316SS, NSC Series | Washer - Disc Spring, Compression Fittings, 316SS, NSP Series【1-2 Pieces Per Package】 | Connector - Straight, Swivel, Quick Seal, Brass, SC4N Series | Connector - Straight, Compression Fittings, Zinc-Plated Steel | 90° Elbows - Instrumentation Tube Fittings, Male BSPP, Brass | 90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKCF Series | ||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 7 Days or more | 3 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days | 13 Days | 13 Days | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 13 Days or more |
Specifications |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Connection Types | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Tube to Tube Equal Dia. Connection | - | Thread to Tube Connection | Thread to Tube Connection | - | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Related Components | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Tube to Tube Equal Dia. Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Thread to Tube Connection | Thread to Tube Connection / Tube to Tube Equal Dia. Connection | Pipe to Tube Connection | - | - | - | - | - | - | - | - | - | - | - | - | Tube to Tube Equal Dia. Connection | - | Thread to Tube Connection | Thread to Tube Connection |
Thread-to-Tube Connection Shape | Male Straight | Female Straight | Male Straight | Elbows | - | - | - | Male Straight | Elbows | - | Male Straight | Elbows | Male Straight | - | Male Straight | Elbows | Elbows | - | - | - | Elbows | Male Straight | - | Female Straight | Elbows | - | Male Straight | Elbows | Male Elbow | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Elbows | Female Straight |
Tube-to-Tube Connection Shape | - | - | - | - | - | Elbows | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight | - | - | Elbows | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Tees | - | - | - |
Thread-to-Tube Multipoint Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Related Components, Shapes, Types | - | - | - | - | Sleeves | - | - | - | - | - | - | - | - | Gaskets | - | - | - | Sleeves | Nuts | - | - | - | - | - | - | Nuts | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Material | Copper | Copper | Stainless Steel | Copper | Plastic | Plastic | - | Copper | Stainless Steel | - | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Copper | Plastic | Copper | Copper | Stainless Steel | Copper | Copper | Copper | Copper | Plastic | Steel | Steel | Brass | - | - | - | - | - | - | - | - | - | - | - | - | Copper | - | Copper | Copper |
Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Not Provided | Not Provided |
Thread Types | R | Rc | R | R | - | - | - | R | R | - | R | R | R | - | R | R | R | - | - | - | R | R | - | G | R | - | NPT | NPT | IKOU | - | - | - | - | - | - | - | - | - | - | - | - | - | - | R | Rc |
Thread Size 1 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | - | - | 1/2 ~ 3/8 | - | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | 1/2 ~ 3/8 | 1/8B(6A) | 1/2 ~ 3/8 | - | - | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 | - | 1/4 ~ 3/8 | 1/4 ~ 3/8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2 ~ 3/8 | 1/2 ~ 3/8 |
Tube Size 1 | 3.18 mm ~ 16 mm | 4 ~ 12 | 3.18 mm ~ 16 mm | 3.18 ~ 15.88 | 3.18 ~ 16 | 6 ~ 12 | - | 3.18 ~ 15.88 | - | - | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | - | 6 ~ 21 | 6 mm | 3.18 mm ~ 16 mm | 3.18 mm ~ 16 mm | 4 mm ~ 16 mm | 3.18 mm ~ 12.7 mm | 3.18 mm ~ 16 mm | 4 ~ 16 | 4 ~ 12 | 4 ~ 10 | 6 ~ 10 | 4 ~ 12 | 1/2" ~ 3/16" | 1/2" ~ 3/16" | 1/2" ~ 3/8" | - | - | - | - | - | - | - | - | - | - | - | - | 4 mm ~ 10 mm | - | 4 mm ~ 16 mm | 4 mm ~ 12 mm |
Tube Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/2" ~ 3/8" | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Inner Dia.(mm) | 2.36 ~ 13 | 2 ~ 9 | 1.65 ~ 13 | - | - | - | - | - | - | - | 2.5 ~ 13 | 2 ~ 13 | 2 ~ 13 | - | 4 ~ 16 | - | 2.36 ~ 13 | - | - | 2.36 ~ 9.56 | 1.65 ~ 13 | 2 ~ 13 | 2 ~ 9 | 2 ~ 8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2.5 ~ 13 | 2.5 ~ 9 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy