(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Compression Fittings（Thread Size 1：1/4）
| Days to Ship |
|
|---|
-
Connector - Straight, Compression Fittings, PN Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
The tube insert allows for secure connection of a sleeve and a cap nut.
With collar thread seal for each R (PT) thread size.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series
Nitta
A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 7 Days or more -
Connector - Straight, Quick Seal, Brass, FC4N Series
Nitta
A brass female connector (millimeter sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
90° Elbows - Quick Seal, Insert Type, Brass, L1N1 Series
Nitta
A brass 90° elbow (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 7 Days or more -
- On Sale Till 07/03/2025
Connector - Straight, Compression Fittings, 316SS, NSC Series
Nihon Pisco
SUS316 is used to provide all materials with excellent corrosion resistance.
[Features]
· SUS316 is used to provide all materials with excellent corrosion resistance.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· Air cleaned and packaged in a Class 1000 clean room .
· Added inch sizes.
· Improved selection.- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
90° Elbows - Compression Fittings, PL Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Chemifit, CP Series【5 Pieces Per Package】
Nitta
Connectors are injection molded for a smooth inner surface. Does not generate dust or pollution. Uses a special polypropylene resin.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.- Volume Discount
Days to Ship: Quote Show Stock Products
-
Self-Align Fittings H/DL/L/LL Series Male Elbow DL【10 Pieces Per Package】
SMC
Self-aligning type pipe fittings by SMC Corporation.
[Features]
· Can be used with soft copper pipes.
· A non-directional type metal sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
[Applications]
· Used for piping in the same direction from female threads.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
- On Sale Till 07/03/2025
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.- Volume Discount
- CAD ：
- 2D
Special Price Days to Ship: Same day or more Show Stock Products
-
Connector - Bulkhead, Compression Fittings, 316SS, NSMF Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
90° Elbows - Quick Seal, Insert Type, 304SS, L1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
SUS316 Insert Fittings KFG2 Series, Swivel Elbow KFG2V【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
[Please refer to the following pages of the catalog]
Applicable tube outer diameter, metric p. 325; inch p. 331- Volume Discount
Days to Ship: 3 Days or more Show Stock Products
-
SUS316, Insert Pipe Fitting, KFG2 Series, Female Union【2 Pieces Per Package】
SMC
[Features]
・ Compact and weight reduced
・ Lubrication-free
·Steam can be used
· Compliant with the Food Sanitation Act of Japan- Volume Discount
Days to Ship: Quote -
Self-Align Fittings H/DL/L/LL Series Swivel Elbow L【10 Pieces Per Package】
SMC
A tightening-type fitting with a strong edge, ensuring external damage will not easily lead to impaired functionality.
[Features]
· A non-directional type sleeve.
· The sleeve helps protect against external damage.
· Low pressure loss.
· A swivel type that can be positioned in any direction.
[Applications]
· Used for right-angle piping from female threads.- Volume Discount
Days to Ship: Quote -
90° Elbows - Compression Fittings, 316SS, NSL Series
Nihon Pisco
All materials use SUS316 for excellent rust resistance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Socket - Bulkhead, Compression Fittings, 316SS, NSMF Series
Nihon Pisco
All materials use SUS316 to provide excellent corrosion resistance.
[Features]
· SUS316, a substance with superior corrosion resistance, was used in all of the materials.
· The no-sleeve-required design eliminates issues of forgetting to attach or losing a sleeve.
· Purified with clean air and packaged in a Class 1000 clean room.
· Added inch sizes.
· Wide selection of products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Tees - Compression Fittings, PTA Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
90° Elbows - Compression Fittings, 316SS, L Series
Junkosha
Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
90° Elbows - Quick Seal, Brass, L4N Series
Nitta
This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKCF Series
Nihon Pisco
A special brass is used for the metal body. Resistance to water corrosion is greatly improved. *The CAD data for this Series is being revised. This data will be made available as soon as the modifications have been completed.
[Features]
· Special brass is used for the metal body.
· The resistance to water corrosion is greatly improved.
· Optimally suited to the automobile industry and adjusting mold temperatures.
· A sleeve-less design. Therefore, forgetting to attach or losing sleeves will never happen again. Suitable for a wide range of various applications.- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Connector - Bulkhead, Compression Fittings, Spatter Resistant, Brass, NKMF Series
Nihon Pisco
Special brass is used for the metal body. Corrosion resistance to water is greatly improved. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Tees - Compression Fittings, 316SS, NSB Series
Nihon Pisco
All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Tees - Compression Fittings, 316SS, NSD Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Compression Fittings, 316SS, NSCF Series
Nihon Pisco
Totally made of corrosion-resistant SUS316.
- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Compression Fittings, 316SS, M Series
Chiyoda
Full decreasing treatment for cleanliness. Male connectors.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
90° Elbows - Compression Fittings, 316SS, ML Series
Chiyoda
Full decreasing treatment for cleanliness. Male elbows.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more -
Socket - Hose Fittings, F Series
Chiyoda
A cap-nut hose socket with high pull-out strength.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Socket - Universal, Hose Fittings, FU Series
Chiyoda
A cap-nut universal socket with high pull-out strength.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Hose Fittings, M Series
Chiyoda
A hose nipple with high pull-out strength.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Hose Fittings, MU Series
Chiyoda
A cap-nut universal nipple with high pull-out strength.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Tees - Service, Compression Fittings, PTB Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Union - Bulkhead, Compression Fittings, PNF Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
- Volume Discount
Days to Ship: 12 Days or more -
Connector - Straight, Compression Fittings, 316SS, N Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Tees - Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
Tees - Service, Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
[Features]
· As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
· Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
· No abnormalities are allowed in the connected part unless the tube ruptures.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it is rust resistant.- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Connector - Straight, Compression Fittings, 316SS, FN Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 14 Days or more -
Union - Bulkhead, Compression Fittings, 316SS, FC Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of an over tightening of cap nut, etc. No abnormality in the connected part unless the tube is ruptured. Does not require management of cap nut tightening torque.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
Union - Bulkhead, Compression Fittings, 316SS, PUN Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
90° Elbows - Compression Fittings, 316SS, LA Series
Junkosha
Usable across a broad temperature range. Free of tubing wear due to over-tightening of cap nuts or the like. Connected parts will not break unless the tube ruptures. Does not require regular cap nut torque tightening.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
Connector - Straight, Flexible Tube Style, N Series
Junkosha
[Features]
▪ Stainless steel fittings for flexible tubing.
▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
· Tightening torque of the cap nut does not need to be managed.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
90° Elbows - Flexible Tube Style, L Series
Junkosha
Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Connector - Straight, Quick Seal, Brass, C4N Series
Nitta
It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more Show Stock Products
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Connection Types |
| Thread-to-Tube Connection Shape |
| Tube-to-Tube Connection Shape |
| Thread-to-Tube Multipoint Connection Shape |
| Related Components, Shapes, Types |
| Material |
| Surface Treatment |
| Thread Types |
| Thread Size 1 |
| Thread Size 2 |
| Tube Size 1 |
| Tube Size 2 |
| Tube Inner Dia.(mm) |
| Tube Inner Dia. at the Smaller Dia. Section(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Junkosha | Nitta | Nitta | Nitta | Nihon Pisco | Junkosha | Nitta | SMC | SMC | Nihon Pisco | Nihon Pisco | Nitta | SMC | SMC | SMC | Nihon Pisco | Nihon Pisco | Junkosha | Junkosha | Nitta | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Chiyoda | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Nitta |
| Product Series | Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series | Connector - Straight, Compression Fittings, 316SS, NSC Series | Connector - Straight, Chemifit, CP Series【5 Pieces Per Package】 | SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】 | Self-Align Fittings H/DL/L/LL Series Male Elbow DL【10 Pieces Per Package】 | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series | Connector - Bulkhead, Compression Fittings, 316SS, NSMF Series | SUS316 Insert Fittings KFG2 Series, Swivel Elbow KFG2V【2 Pieces Per Package】 | SUS316, Insert Pipe Fitting, KFG2 Series, Female Union【2 Pieces Per Package】 | Self-Align Fittings H/DL/L/LL Series Swivel Elbow L【10 Pieces Per Package】 | 90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKCF Series | Connector - Bulkhead, Compression Fittings, Spatter Resistant, Brass, NKMF Series | Connector - Straight, Compression Fittings, 316SS, NSCF Series | Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series | Connector - Straight, Compression Fittings, 316SS, FN Series | |||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship | 8 Days or more | 7 Days or more | 8 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Quote
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
3 Days or more
Show Stock Products | Quote | Quote |
Same day or more
Show Stock Products | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 13 Days or more | 13 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 13 Days or more | 13 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 14 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 14 Days or more | 14 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more |
8 Days or more
Show Stock Products |
| Connection Types | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Related Components | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection |
| Thread-to-Tube Connection Shape | Male Straight | Male Straight | Female Straight | Elbows | Male Straight | Elbows | Male Straight | Male Straight | Elbows | Male Straight | Female Straight | Elbows | Elbows | Female Straight | Elbows | Elbows | - | - | Elbows | Elbows | Elbows | Female Straight | Female Straight | - | - | Female Straight | Male Straight | Male Straight | Elbows | Female Straight | Female Straight | Male Straight | Male Straight | - | Female Straight | Male Straight | - | - | Female Straight | Female Straight | Male Straight | Elbows | Male Straight | Elbows | Male Straight |
| Tube-to-Tube Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread-to-Tube Multipoint Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Tees | - | - | - | - | - | Tees | Tees | - | - | - | - | - | - | - | - | Tees | - | - | Tees | Tees | - | - | - | - | - | - | - |
| Related Components, Shapes, Types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Sockets | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Material | Copper | Copper | Copper | Copper | Stainless Steel | Copper | Plastic | Stainless Steel | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Stainless Steel | Stainless Steel | Copper | Stainless Steel | Copper | Copper | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Copper | Copper | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper |
| Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided |
| Thread Types | R | R | Rc | R | R | R | R | NPT | R | R | Rc | R | R | Rc | R | R | Rc | R | R | R | R | Rc | Rc | R | R | Rc | R | R | R | G ～ Rc | G ～ Rc | R | R | R | Rc | R | R | R | Rc | Rc | R | G | R | R | R |
| Thread Size 1 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 | 1/4 |
| Thread Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tube Size 1 | 3.18 mm ～ 12.7 mm | 4.76 ～ 12.7 | 6 ～ 10 | 4.76 ～ 12.7 | 4 mm ～ 12.7 mm | 3.18 mm ～ 12.7 mm | 6 ～ 10 | 6.35 ～ 8 | 4 ～ 10 | 4 mm ～ 12 mm | 4 mm ～ 12.7 mm | 6.35 ～ 12.7 | 6 ～ 10 | 6 | 10 | 4 mm ～ 12.7 mm | - | 6 mm ～ 10 mm | 3.18 mm ～ 12.7 mm | 4 ～ 12 | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 4 mm ～ 12.7 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 6 mm ～ 12 mm | 6 mm ～ 12 mm | 6 ～ 12 | 8 mm ～ 10 mm | 6 mm ～ 10 mm | 6 mm | 3.18 mm ～ 12.7 mm | 8 mm | 8 mm | 6 mm | 4 mm ～ 12 mm | 4 mm ～ 12 mm | 6 mm ～ 8 mm | 6 mm ～ 12 mm | 8 mm | 4 ～ 12 |
| Tube Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tube Inner Dia.(mm) | 2.36 ～ 9.56 | - | 4 ～ 8 | - | 2 ～ 10 | 2.36 ～ 9.56 | - | 3.95 ～ 6 | - | 2.5 ～ 9 | 2 ～ 10 | - | 4 ～ 7.5 | 4 | - | 2 ～ 10 | - | 4 ～ 7.5 | 1.65 ～ 10 | 2 ～ 9 | 2.5 ～ 9 | 2.5 ～ 9 | 2.5 ～ 9 | 2 ～ 10 | 2 ～ 10 | 2 ～ 10 | 2 ～ 10 | 2 ～ 10 | 2 ～ 10 | 4 ～ 8 | 4 ～ 8 | 4 ～ 8 | 5 ～ 6.5 | 4 ～ 7.5 | 4 | 1.65 ～ 10 | 6 | 6 | 4 | 2 ～ 10 | 2 ～ 10 | 4 ～ 6 | 4 ～ 8 | 5 | 2 ～ 9 |
| Tube Inner Dia. at the Smaller Dia. Section(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Connection Types
- Thread to Tube Connection
- Thread to Tube Multipoint Connection
- Tube to Tube Equal Dia. Connection
- Tube to Tube Stepped Dia. Connection
- Pipe to Tube Connection
- Related Components
-
Thread-to-Tube Connection Shape
- Elbows
- Male Straight
- Female Straight
- Male Elbow
- Female Elbow
-
Tube-to-Tube Connection Shape
- Straight
- Elbows
- Tees
- Cross
- Partition Unions
-
Thread-to-Tube Multipoint Connection Shape
- Tees
- Manifolds
-
Related Components, Shapes, Types
- Caps
- Plugs
- Gaskets
- Nuts
- Bushings
- Sockets
- Sleeves
- Inserts
- Other Related Components
-
Material
-
Surface Treatment
-
Thread Types
-
Metric / Inch
- metric
-
Thread Size 1
-
Thread Size 2
-
Tube Size 1
-
Tube Size 2
-
Tube Inner Dia.(mm)
-
Tube Inner Dia. at the Smaller Dia. Section(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- Nitta (27)
- SMC (20)
- Junkosha (15)
- Nihon Pisco (12)
- Chiyoda (6)
- Koyo (0)
- Brennan Industries (0)
- USA Industrials (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy