(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Connector - Straight, Compression Fittings, PN Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings."
The tube insert allows for secure connection of a sleeve and a cap nut.
With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, Insert Type, Brass, L1N1 Series
Nitta
A brass 90° elbow (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 7 Days or more |
---|
Connector - Straight, Quick Seal, Brass, C4N Series
Nitta
It consists of three parts: brass fitting body of connector (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Quick Seal, Brass, L4N Series
Nitta
This 90° brass elbow (mm size) consists of three parts: fitting body, nut, and sleeve. The fitting body and insert come integrated. Also, it is superb in negative pressure performance.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, NSC Series
Nihon Pisco
SUS316 is used to provide all materials with excellent corrosion resistance.
[Features]
· SUS316 is used to provide all materials with excellent corrosion resistance.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· Air cleaned and packaged in a Class 1000 clean room .
· Added inch sizes.
· Improved selection.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Compression Fittings, 316SS, L Series
Junkosha
Usable across a broad temperature range. Prevents wear to tubing cost by over-tightening of cap nuts and the like. No abnormality in the connected part unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, NSL Series
Nihon Pisco
All materials use SUS316 for excellent rust resistance.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Hose Fittings, M Series
Chiyoda
A hose nipple with high pull-out strength.
Days to Ship: | 8 Days or more |
---|
Header Block - Compression Fittings, Mounting Plates, CB Series
Chiyoda
A compact header block for use in tight spaces.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, N Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 8 Days or more |
---|
Tees - Quick Seal, Insert-Less, Brass, 4A03 Series
Nitta
Three parts: tee fitting body, nut, and sleeve. The effective sectional area is larger without insert.
[Features]
· Screw-in type.
· Three parts: fitting body, nut, and sleeve.
· High flow rate can be secured.
· It has no insert, making its effective cross-section greater.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Nylon Coil Tube, M Series
Nitta
It consists of three parts: fitting body of connector, nut, and sleeve. Fitting dedicated to nylon coil tubes.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series
Nitta
A 3-point brass connector (inch sized) with integrated body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 7 Days or more |
---|
Insert Fittings KF Series, Elbow Union KFL【5-10 Pieces Per Package】
SMC
Most general model, used for pipework proceeding at a right angle from the female-threaded connector.
Days to Ship: | Same day or more |
---|
Show Stock Products
SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】
SMC
[Features]
· Compact, lightweight.
· Grease-free.
· Can be used with steam.
· Conforms to the Food Sanitation Act of Japan.
Days to Ship: | Same day or more |
---|
Show Stock Products
90° Elbows - Compression Fittings, Male BSPP Thread - N7202 Series
Brennan Industries
Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
Brennan Instrumentation Tube Fitting Features:
· Self-aligning
· Work on thick and thin wall tubing
· Resist vibration
· Work on a variety of tube materials
· All components are made of the same material for thermal compatibility and corrosion resistance
· Resist temperature cycling
· Compensate for the variables encountered in the tube and materials
· Do not significantly reduce flow area
Performance
· Work in vacuums, as well as at low and high pressures
· Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
· Seal consistently over a wide range of temperature cycling
· Seal repeatedly under both make and remake conditions
· Resist pressure beyond the tubing burst point
Assembly
· Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
· Do not require disassembly and inspection of ferrule swaging at every make-up
· Do not require any special tools for assembly
Days to Ship: | 11 Days |
---|
90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series
Nihon Pisco
Special brass is used for metal body to greatly improve corrosion resistance to water.
[Features]
· Special brass is used for metal body.
· Corrosion resistance to water has been greatly increased.
· Ideal for use in the automobile industry and for mold temperature control.
· Never worry about forgetting or losing the sleeve again with this no-sleeve design.
· A wide variety is available to support a wide range of applications.
· 5 shapes: Types C, CF, MF, L and E. Adjustable tube: 10 types are available from φ4 to φ16mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Tees - Compression Fittings, 316SS, NSB Series
Nihon Pisco
All parts are made using SUS316 for excellent corrosion resistance. *The CAD data for this series is being revised. It will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Tees - Compression Fittings, 316SS, NSD Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series
Nihon Pisco
All parts made of SUS316 for excellent corrosion resistance. * The CAD data for this series is being revised. This will be available as soon as modifications are complete.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Compression Fittings, 316SS, M Series
Chiyoda
Full decreasing treatment for cleanliness. Male connectors.
Days to Ship: | 13 Days or more |
---|
90° Elbows - Compression Fittings, 316SS, ML Series
Chiyoda
Full decreasing treatment for cleanliness. Male elbows.
Days to Ship: | 13 Days or more |
---|
Connector - Straight, Hose Fittings, MU Series
Chiyoda
A cap-nut universal nipple with high pull-out strength.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Tube Fittings, Male BSPT, Brass, BML Series
Koyo
Uses cadmium-free brass material.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Compression Fittings, PL Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
Days to Ship: | 8 Days or more |
---|
Tees - Compression Fittings, PTA Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 for "pneumatic pipe fittings." Allows for reliable connections because the mechanism takes the tube insert and clamps onto it with the sleeve and the cap nut. Each R (PT) screw size has a different colored screw seal.
Days to Ship: | 12 Days or more |
---|
Tees - Service, Compression Fittings, PTB Series
Junkosha
Conforms to Japanese Industrial Standards JIS B8381 "Pneumatic Fittings." Allows for reliable connections because the mechanism clamps onto the tube insert with the sleeve and the cap nut. With collar thread seal for each R (PT) thread size.
Days to Ship: | 12 Days or more |
---|
Tees - Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Free of wear to tubing due to over-tightening of cap nut, etc. No abnormality in the connector unless the tube ruptures. Does not require management of cap nut tightening torque.
Days to Ship: | 12 Days or more |
---|
Tees - Service, Compression Fittings, 316SS, TA Series
Junkosha
Usable across a broad temperature range. Wear on tubing due to over tightening of the cap nut, etc. is eliminated.
[Features]
· As the product consists of SUS316, which has good corrosion resistance properties, it can be used in a wide temperature range from low to high.
· Designed specially for fluorine polymer/nylon resin tubes to ensure that the tube does not rupture due to excessive tightening of the cap nut, etc.
· No abnormalities are allowed in the connected part unless the tube ruptures.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it is rust resistant.
Days to Ship: | 14 Days or more |
---|
Union - Bulkhead, Compression Fittings, 316SS, PUN Series
Junkosha
Usable across a broad temperature range. No wear and tear to tubing as a result of the over tightening of cap nut, etc.
[Features]
· Because the product consists of SUS316, which has high corrosion resistance properties, it can be used in a wide temperature range, at both low and high temperatures.
· Designed especially for fluorine polymer/nylon resin tubes, so the tube does not rupture due to excessive tightening of cap nuts, etc.
· No abnormality in the connected part unless the tube is ruptured.
· The tightening torque of the cap nut does not need to be managed.
Fitting uses SUS316, so it resists rust.
Days to Ship: | 12 Days or more |
---|
Connector - Straight, Flexible Tube Style, N Series
Junkosha
[Features]
▪ Stainless steel fittings for flexible tubing.
▪ To resolve tube twisting during piping, a unique mechanism of cap nuts built into the sleeve can be used.
· Tightening torque of the cap nut does not need to be managed.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Flexible Tube Style, L Series
Junkosha
Stainless steel fittings for flexible tubing. To resolve snaking during piping, we use cap nuts built into the sleeve that use a mechanism unique to our company. Does not require management of cap nut tightening torque.
Days to Ship: | 8 Days or more |
---|
Tees - Quick Seal, Brass, T4N Series
Nitta
Brass specification tee (millimeter size) fitting includes three components: the main body, , nuts and sleeve(s) in an integrated package. Also features excellent negative pressure performance.
[Features]
· Screw-in type.
· Three parts included: fitting body, nuts and sleeve(s).
· Demonstrates excellent sealing performance.
· Fitting body and insert are integrated.
· Also features excellent performance under negative pressure.
· Only the connectors are sealed.
· Does not require sealing tape.
Compliant with JISB8381-1995 (pipe fitting for a flexible hose for pneumatic use)
Days to Ship: | 8 Days or more |
---|
Tees - Quick Seal, Brass, ST4N Series
Nitta
It consists of three parts: brass fitting body of service tee (mm size), nut, and sleeve, and fitting body and insert are integrated. Also, it is excellent in negative pressure performance.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, 304SS, C4N Series
Nitta
A 3-point stainless steel specification connector (mm sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Also demonstrates excellent performance at negative pressures.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Demonstrate excellent sealing performance.
· Fitting body and insert are integrated.
· Also has excellent performance with negative pressure.
· Made of SUS304 for excellent corrosion resistance.
· Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, 304SS, L4N Series
Nitta
A 3-point stainless steel 90° elbow (millimeter sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Tees - Quick Seal, 304SS, T4N Series
Nitta
A 3-point stainless steel specification tee (mm sized) with fitting body, nut, and sleeve.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
·Excellent sealing performance.
· Integrated fitting body and insert.
· Also has excellent performance under negative pressure.
· Made of SUS304 for excellent corrosion resistance.
· Complies with JIS B 8381-1995 (connector for flexible pneumatic hose).
Days to Ship: | 10 Days or more |
---|
Connector - Straight, Quick Seal, Insert-Less, Brass, 4A01 Series
Nitta
Consists of three parts: connector fitting unit, nut, and sleeve. The effective cross-sectional area is larger without an insert.
[Features]
· Screw-in type.
· 3 parts: fitting unit, nut, and sleeve.
· Guarantees a high flow rate.
· Has no insert, giving it a wider cross-section.
· Only the connectors are sealed, so there is no need to wrap them with sealing tape.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, Insert-Less, Brass, 4A02 Series
Nitta
90° elbow consisting of three parts: fitting body, nut, and sleeve. The effective sectional area is larger without insert.
[Features]
· Screw-in type.
· Three parts: fitting body, nut, and sleeve.
· High flow rate can be maintained.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
Connector - Straight, Quick Seal, DK Type, Brass, DC6 Series
Nitta
Consisting of three parts: fitting body of connector, nut, and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
[Features]
· Screw-in type.
· Three parts: fitting body, nut, and sleeve.
· Fittings dedicated to DK tubes.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, DK Type, Brass, DL6 Series
Nitta
90° elbow consisting of three parts: fitting body, nut and sleeve. Dedicated fitting for DK tubes. No need to wrap with sealing tape.
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Fitting for dedicated use with DK tubes.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
Tees - Quick Seal, DK Type, Brass, DT6 Series
Nitta
[Features]
· Screw-in type.
· 3 parts: fitting body, nut and sleeve.
· Fittings dedicated to DK tubes.
· Only connectors are sealed.
· Does not require sealing tape.
Days to Ship: | 8 Days or more |
---|
90° Elbows - Quick Seal, Insert Type, 304SS, L1N Series
Nitta
A 3-point stainless steel 90° elbow (inch sized) with fitting body, nut, and sleeve. The fitting body and insert are integrated. Provides excellent performance at negative pressures.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Connection Types |
Thread-to-Tube Connection Shape |
Tube-to-Tube Connection Shape |
Thread-to-Tube Multipoint Connection Shape |
Related Components, Shapes, Types |
Material |
Surface Treatment |
Thread Types |
Thread Size 1 |
Thread Size 2 |
Tube Size 1 |
Tube Size 2 |
Tube Inner Dia.(mm) |
Tube Inner Dia. at the Smaller Dia. Section(mm) |
Brand | Junkosha | Nitta | Nitta | Nitta | Nihon Pisco | Junkosha | Nihon Pisco | Chiyoda | Chiyoda | Junkosha | Nitta | Nitta | Nitta | Nitta | SMC | SMC | Brennan Industries | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Nihon Pisco | Chiyoda | Chiyoda | Chiyoda | Koyo | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Junkosha | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta | Nitta |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Connector - Straight, Compression Fittings, 316SS, NSC Series | Header Block - Compression Fittings, Mounting Plates, CB Series | Connector - Straight, Quick Seal, Insert Type, 304SS, C1N Series | Connector - Straight, Quick Seal, Insert Type, Brass, C1N Series | Insert Fittings KF Series, Elbow Union KFL【5-10 Pieces Per Package】 | SUS316 Insert Fittings KFG2 Series, Male Connector KFG2H【2 Pieces Per Package】 | 90° Elbows - Compression Fittings, Male BSPP Thread - N7202 Series | 90° Elbows - Compression Fittings, Spatter Resistant, Brass, NKL Series | Connector - Straight, Compression Fittings, Spatter Resistant, Brass, NKC Series | Connector - Bulkhead, Compression Fittings, 316SS, NSMC Series | Connector - Straight, Quick Seal, Insert-Less, Brass, 4A01 Series | Connector - Straight, Quick Seal, DK Type, Brass, DC6 Series | |||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
Days to Ship | 8 Days or more | 7 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 11 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 12 Days or more | 14 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Connection Types | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Connection | Thread to Tube Multipoint Connection | Thread to Tube Connection |
Thread-to-Tube Connection Shape | Male Straight | Elbows | Male Straight | Elbows | Male Straight | Elbows | Elbows | Male Straight | - | Male Straight | - | Male Straight | Male Straight | Male Straight | Male Straight | Male Straight | Male Elbow | Elbows | Male Straight | - | - | Male Straight | Male Straight | Elbows | Male Straight | Elbows | Elbows | - | - | - | - | Male Straight | Male Straight | Elbows | - | - | Male Straight | Elbows | - | Male Straight | Elbows | Male Straight | Elbows | - | Elbows |
Tube-to-Tube Connection Shape | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread-to-Tube Multipoint Connection Shape | - | - | - | - | - | - | - | - | Manifolds | - | Tees | - | - | - | - | - | - | - | - | Tees | Tees | - | - | - | - | - | - | Tees | Tees | Tees | Tees | - | - | - | Tees | Tees | - | - | - | - | - | - | - | Tees | - |
Related Components, Shapes, Types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Material | Copper | Copper | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Stainless Steel | Copper | Copper | Stainless Steel | Copper | Copper | Stainless Steel | Stainless Steel | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Copper | Copper | Copper | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Copper | Copper | Stainless Steel | Stainless Steel | Copper | Copper | Copper | Copper | Copper | Copper | Stainless Steel |
Surface Treatment | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
Thread Types | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R | R |
Thread Size 1 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 3/8 | 1/2 ~ 3/8 | 1/4 ~ 3/8 | 1/4 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/4 ~ 3/8 | 1/8 | 1/2" | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/8B(6A) | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/4 ~ 3/8 | 1/4 ~ 1/8 | 1/2 ~ 3/8 | 1/4 ~ 1/8 | 1/4 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/8 | 1/2 ~ 3/8 | 1/2 ~ 3/8 | 1/4 ~ 3/8 | 1/4 ~ 3/8 | 1/4 ~ 3/8 | 1/2 ~ 3/8 |
Thread Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Size 1 | 3.18 mm ~ 16 mm | 3.18 ~ 15.88 | 4 ~ 16 | 4 ~ 16 | 4 mm ~ 16 mm | 3.18 mm ~ 16 mm | 4 mm ~ 16 mm | 6 ~ 21 | - | 3.18 mm ~ 16 mm | 8 ~ 10 | - | 6.35 ~ 12.7 | 3.18 ~ 15.88 | 4 ~ 10 | 6 | 1/2" | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 16 mm | 4 mm ~ 12 mm | 4 mm ~ 12 mm | 8 mm ~ 16 mm | 6 mm | 3.18 mm ~ 16 mm | 3.18 mm ~ 12.7 mm | 6 mm ~ 12.7 mm | 6 mm ~ 10 mm | 6 mm ~ 8 mm | 4 mm ~ 12 mm | 4 mm ~ 12 mm | 8 mm | 6 ~ 16 | 4 ~ 12 | 6 ~ 12 | 6 ~ 12 | - | 4 ~ 12 | 4 ~ 12 | 6 ~ 10 | 6 ~ 10 | 6 ~ 10 | 6.35 ~ 12.7 |
Tube Size 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tube Inner Dia.(mm) | 2.36 ~ 13 | - | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | 1.65 ~ 13 | 2 ~ 13 | 4 ~ 16 | - | 1.65 ~ 13 | - | - | - | - | 2.5 ~ 6 | 2.5 ~ 4 | 9.9mm | 2.5 ~ 13 | 2.5 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 13 | 2 ~ 10 | 2 ~ 10 | 5 ~ 11 | - | 2.36 ~ 13 | 2.36 ~ 9.56 | 4 ~ 9.56 | 4 ~ 7.5 | 4 ~ 6 | 2 ~ 10 | 2.5 ~ 8 | 5 | 4 ~ 13 | 2 ~ 9 | 4 ~ 9 | 4 ~ 9 | - | - | - | - | - | - | - |
Tube Inner Dia. at the Smaller Dia. Section(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy