Strut Posts（Material：Stainless Steel）

Hexagonal Posts - With internal thread at both ends, configurable length.

MISUMI

New: Black anodized aluminum added and available length extended. [July 2023]Metric Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.[Diameter range] 5mm - 32mm[Length range] 8...Readmore

• Lead Time Reduction

• METRIC
• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - One threaded end, one internal threaded end, configurable length.

MISUMI

New: Aluminum material is added and available length extended. [July 2023]Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.[Diameter range] 5mm - 32mm[Length range] 8mm - 1...Readmore

• Lead Time Reduction

• METRIC
• inCAD Components

CAD ：

2D / 3D

Circular Posts - One threaded end, one internal threaded end, flat surfaces for wrench.

MISUMI

New: Aluminum material is added. [July 2023]Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment. And installation or removal of Wrench Flats can be selected.[Diameter range] 5m...Readmore

• Lead Time Reduction

• METRIC
• inCAD Components

CAD ：

2D / 3D

Circular Posts - Both ends threaded, with flat surfaces for wrench, configurable length.

MISUMI

New: Black anodized aluminum added and available length extended. [July 2023]Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can b...Readmore

• Lead Time Reduction

• METRIC
• inCAD Components

CAD ：

2D / 3D

Circular Posts - With internal threading on one end, key flats.

MISUMI

New: Aluminum material is added. [July 2023]Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.[Diameter range] 5mm,6mm,8mm,10mm,12mm,1...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - With millimeter scale, solid, configurable length.

MISUMI

Convenient for Changeovers of Cameras, Sensors, etc.

• Volume Discount

• inCAD Components

CAD ：

2D / 3D

Circular Posts - One end with external thread and one with internal thread, configurable dimensions.

MISUMI

New: Aluminum material is added. [July 2023]Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can be selected.[Diameter range] 5mm - 50mm[Length range] 15mm -...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - One end with external threading and the other end with internal threading, selectable thread, (inches).

MISUMI

Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the toleran...Readmore

• INCH

CAD ：

2D / 3D

Circular Posts - One end with male thread, one end with female thread, (Inches).

MISUMI

Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change t...Readmore

• Volume Discount

• INCH

CAD ：

2D / 3D

Hexagonal Posts - Small thread, with external and internal threading.

MISUMI

Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent and 303 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ or No Surface Treatment.Suitable for Limited Spaces or Space-Saving required Places.[Diameter range] 4mm, 5mm, 5.5mm[Length range]5mm - 20mm. Inch option available, please click Here.

• Volume Discount

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - With pilot shoulder, external threading on one end and internal threading on the other end.

MISUMI

New: Aluminum material is added and available length extended. [July 2023]Metric Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..[Diameter range] 8mm - 32mm[Length range] 1...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - Threaded ends, configurable dimensions.

MISUMI

New: Aluminum material is added. [July 2023]Metric Male-Male Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And installation or removal of Wrench Flats can be selected.[Diameter range] 5mm - 50mm[Length range] 15mm -...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - Graduated without numbers, solid, configurable length.

MISUMI

Posts for stand with scale. Can be specified in 1mm increment.

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - Both ends threaded, configurable length, selectable thread, (Inches).

MISUMI

Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to ...Readmore

• INCH

CAD ：

2D / 3D

Hexagonal Posts - One end with external thread, configurable length.

MISUMI

New: Aluminum material is added and available length extended. [July 2023]One End Threaded Metric Male-Male Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..[Diameter range] 5mm - 32m...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - With external threading on one end, key flats.

MISUMI

New: Aluminum material is added. [July 2023]Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.[Diameter range] 5mm,6mm,8mm,10mm,12mm,1...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - Hollow, with V-groove, configurable length.

MISUMI

•Type: Circular Shape•Left End Shape: V Groove•Right End Shape: Straight•Style: Hollow•Engraved Scale: Without Scale

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - One end with external threading, one end with internal threading, selectable length (inches).

MISUMI

Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change the toleranc...Readmore

• Volume Discount

• INCH

CAD ：

2D / 3D

Circular Posts - Both ends threaded, (Inches).

MISUMI

Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change t...Readmore

• Volume Discount

• INCH

CAD ：

2D / 3D

Circular Posts - Both ends threaded, configurable length, (Inches).

MISUMI

Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance. Metric option avail...Readmore

• Lead Time Reduction

• INCH

CAD ：

2D / 3D

Square Posts - Graduated, configurable length, hollow.

MISUMI

Due to square pipe with scale, this is suitable for preventing sensor/camera from rotating during frequent setup changes.

• METRIC
• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - With pilot, both ends threaded, selectable values.

MISUMI

New: Aluminum material is added and available length extended. [July 2023]Metric Male-Male Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..[Diameter range] 8mm - 32mm[Length range] 15mm - 1...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - One threaded end, configurable length.

MISUMI

New: Aluminum material is added and available length extended. [July 2023]One End Tapped Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..[Diameter range] 5mm - 32mm[Length range] 15mm - 1...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - Stepped, internal threading on both ends.

MISUMI

New: Aluminum material is added. [July 2023]Metric Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017-T4 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.[Diameter range] 5mm,10mm,12mm,15mm,20mm...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - With pilot, one end with external thread and the other with internal thread.

MISUMI

New: Aluminum material is added. [July 2023]Metric Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2017 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/ Clear or Black Anodize or No Surface Treatment.And Wrench Flats,Thread diameter, Pilot size can be selectable.[Diameter range] 5mm,10mm,12mm,15mm,20mm...Readmore

• Degreasing
• Spec Change
• Lead Time Reduction

• inCAD Components

CAD ：

2D / 3D

Circular Posts - For devices, with V-groove, configurable length.

MISUMI

•Type: Circular Shape•Left End Shape: V Groove•Right End Shape: Straight•Style: Solid•Engraved Scale: Without Scale

• inCAD Components

CAD ：

2D / 3D

Circular Posts - With millimeter scale, hollow, configurable length.

MISUMI

Convenient for Changeovers of Cameras, Sensors, etc.

• Volume Discount

• inCAD Components

CAD ：

2D / 3D

Hexagonal Posts - Both ends threaded, (Inches).

MISUMI

Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75[Length range] 1.00, 1.50, 2.00, 2.50, 3.00, 3.50, 4.00, 5.00, 6.00. Use the alteration LKC to change t...Readmore

• Volume Discount

• INCH

CAD ：

2D / 3D

Hexagonal Posts - Both ends threaded, configurable length, (Inches).

MISUMI

Inch Female-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.Metric option availa...Readmore

• INCH

CAD ：

2D / 3D

Hexagonal Posts - One end with external threading, one end with internal threading, configurable length (inches).

MISUMI

Inch Male-Female Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance.Metric option available, please click Here.

• INCH

CAD ：

2D / 3D

Hexagonal Posts - Configurable, both ends with male thread or male and female thread, configurable length.

MISUMI

Inch Thread/Tap selectable Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to ...Readmore

• INCH

CAD ：

2D / 3D

Circular Posts - Both ends threaded, configurable length, selectable thread, (Inches).

MISUMI

Inch Female-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance. Metric option available, please click Here.

• Lead Time Reduction

• INCH

CAD ：

2D / 3D

Circular Posts - One end with external thread, one end with internal thread, configurable length, (Inches).

MISUMI

Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to change the tolerance. Metric option avail...Readmore

• Lead Time Reduction

• INCH

CAD ：

2D / 3D

Circular Posts - One end with external thread and the other end with internal thread, configurable length, selectable thread, (Inches).

MISUMI

Inch Male-Female Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to ...Readmore

• Lead Time Reduction

• INCH

CAD ：

2D / 3D

Circular Posts - Extended thread, combination of male and female threads, selectable thread, (Inches).

MISUMI

Inch Thread/Tap selectable Circular Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, 2011 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating/Trivalent Chromate (Black) / Clear Anodize or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 1.00 - 24.00. Use the alteration LKC to ...Readmore

• Lead Time Reduction

• INCH

CAD ：

2D / 3D

Circular Posts - For device supports, configurable length, hollow or solid, (Inches).

MISUMI

Inch circular Circular Posts (Standoffs) are available in 1045 Carbon Steel Equivalent, and 304 Stainless Steel, with the following options for Surface Treatment : Electroless Nickel Plating or No Surface Treatment.Thread diameter is selectable.[Diameter range] 0.38, 0.50, 0.63, 0.75, 1.00[Length range] 2.00 - 18.00. Metric option available, please click Here.