Cam Followers & Roller Followers（Material：Carbon Steel）

• 

  Cam Followers - CF-AB Series.

  THK

  It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
  · [Type and features]
  · CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Caged, sealed type, CFBUU series.【1-10 Pieces Per Package】

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Sealed Type
  ·With Hexagon Hole
  ·CFBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Roller Followers - Spherical outer ring, non-insulated, NART series.

  THK

  [Features]-NART-R type (non-separable type): A non-separable type bearing with side plates fixed inside.-NART-VR type (non-separable type): A full-roll bearing suitable for places where heavy loads act at low speeds on the NART-R type.-Spherical processing is applied to the outer diameter of the outer ring to alleviate eccentric load.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Caged, shielded type, CFB series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Cage
  ·Shield Type
  ·With Hexagon Hole
  ·CFB Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Roller Followers - NAST Series.

  THK

  Isolation bearing combining a thick inner inner ring and precision cage with needle roller.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylindrical Roller Followers - Full complement type, with inner ring, NURT series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Full Complement Type
  ·with Inner Ring
  ·Crowned Outer Ring
  ·NURT Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Roller Followers - NAST-ZZ Series.

  THK

  NAST type isolation bearing with side plates both sides of the inner ring to form a labyrinth seal.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CF-A Series.

  THK

  [Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Leva Followers - CF Series.

  THK

  This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Threaded for grease fittings, flat.

  MISUMI

  The outer diameter of the cam follower is flat. The thread for the grease fitting can be M6 or BSPT 1/8. The material is 52100 bearing steel. The outer diameter is crowned and can be configured in sizes from 16 to 52mm. The nut to secure it is carbon steel. The grease fitting can be included, configured by alterations.

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Cam Followers - With thrust balls, series CFN-R-A.

  THK

  It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
  · [Type and features]
  · The CFN-R-A model is a cam follower incorporating an internal thrust ball. It has the effect of preventing wear and friction on the sliding surface when a thrust load is applied due to mounting error.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CFT Series.

  THK

  Cam follower with stud head and screw section normally used for tap pipe processing.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CF-SFU Series.

  THK

  Type in which the uprights are staggered and can be fastened with screws to simplify installation. Ideal for equipment that does not have space for stud attachment. Type CF-SFU is only available with adhesive. The CF-SFU model is equipped with UU seals even when no UU symbol is used.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylindrical Roller Cam Followers - Cageless type, with hexagonal key hole, NUCFBR series.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·NUCFBR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• 

  Cam Followers - Head with hexagon wrench socket, flat.

  MISUMI

  Cam follower outer diameter is flat, configurations available for general, high load or low particle emission applications. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Head with hexagon wrench socket, crowned.

  MISUMI

  Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CFS-A Series.

  THK

  Cam follower with an extremely fine needle roller.
  
  [Features]
  · Easy to use in limited spaces due to the small outer diameter

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Solid.

  MISUMI

  •Roller Type: Crowned Type
  •Category: Roller Follower
  •Roller Follower Type: Non-Separate
  •Roller Guiding Method: Retainer Type
  •Inner Ring: Provided

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Non-Separable Roller Followers - Caged, with inner ring and seals, NARTUUR series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Non-Separatable
  ·with Inner Ring
  ·Sealed Type
  ·NARTUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Cam Followers - Straight slot, crowned.

  MISUMI

  They can be configured for a general application or for an application where low particulate emission is required (clean room). Options with or without seals. Outer diameters selectable in sizes from 13 to 35mm. Available in 52100 bearing steel or 440C stainless steel. Crowned type roller. Roller guiding method: retainer type.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - CFH-A Series.

  THK

  A cam follower where precision adjustment of the position is easily performed by turning the stud,
  as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Standard, CFV Series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
  ·Standard Type
  ·CFV Series

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Solid Eccentric Cam Followers - Caged, shield type, series CFESB.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Solid Eccentric Stud
  ·With Cage
  ·Shield Type
  ·With Hexagon Hole
  ·CFESB Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Inch Cam Followers - Full complement type, sealed, series CRVBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Hexagon Hole
  ·CRVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  C-Lube Cam Followers - Caged, with hexagonal bore, series CFWBUUR.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.
  •As studs already have threads or steps, they are easyto mount.
  •Cam Followers are follower bearings for cam mechanisms and linear motions and have high rigidity andhigh accuracy.
  •Applications: formachine tools, industrial robots, electronic devices,and OA equipment.
  •These Cam Followers are lubricated with C-Lube, a thermosetting solid-type lubricant which fills the inner space of the bearing.

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Eccentric Cam Followers - For hex wrench, crowned.

  MISUMI

  Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine adjust the position by turning the stem during assembly. Available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.

  • Volume Discount
  • Spec Change
  • Price Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Roller Followers - With cage, NATR series.

  NTN

  Spherical shaped bearing used in a mechanism in which the outer ring rolls on the raceway. Various configurable options with or without shank, cylindrical or spherical outer ring. Options with or without seal.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Roller Followers - Complete Roller, NATV series.

  NTN

  Bearing used for a mechanism in which the outer ring rolls on a track. Roller followers do not have a shank. A roller or cam follower can be configured. The shape of the outer ring can be cylindrical or spherical. Material is carbon steel. Available with seals.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Cam Followers - CFH-AB Series.

  THK

  The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement
  ·Sealed Type
  ·With Hexagon Hole
  ·CFVBUUR Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Solid Eccentric Cam Followers - Caged, sealed type, series CFESBUU.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·With Solid Eccentric Stud
  ·With Cage
  ·Sealed Type
  ·With Hexagon Hole
  ·CFESBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	5 Days or more

• 

  Separable Roller Trackers - Caged, with inner ring, NASTZZ series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Separatable
  ·with Cage<
  ·NASTZZ Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Eccentric Type Cam Followers - Full complement type, Sealed, Series CFEVBUU.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  ·Full Complement
  ·with Hexagon hole
  ·Sealed Type
  ·CFEVBUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days

• 

  Cam Followers - Straight groove, flat.

  MISUMI

  The outer diameter of the cam follower is flat. They can be configured for a general application or for an application where low particle emission is required (clean room). Available in 52100 bearing steel or 440C stainless steel. Cylindrical outer ring type roller. Roller guiding method: retainer type. Options with or without seals.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cam Followers - Threaded for grease fittings, crowned.

  MISUMI

  Tapped holes for grease fittings are provided. Installation is simple.

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• • New Products

  

  Cam Followers - Hexagon socket for head and shank, flat.

  MISUMI

  Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Roller Followers - Separate, urethane coated, flat.

  MISUMI

  This type of roller follower does not have a stem. The urethane is baked onto the outer ring of the roller follower. The shape of the outer ring is flat. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C. Urethane has a shore hardness of A90.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Standard Type Cam Followers - Full complement type, with shield, CFVB series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Shield Type
  ·With Hexagon Hole
  ·CFVB Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Separable Roller Trackers - Open, with cage and without inner ring RNAST series.

  IKO

  IKO Roller Followers are bearings designed for outer ring rotation, in which needle rollers are incorporatedin a thick walled outer ring.Roller Followers include separable and non-separable types. These bearings are available in a variety oftypes to suit almost any kind of application. They are widely used for cam mechanisms and for linearmotions of conveying equipment.
  ·Separatable
  ·without Inner Ring
  ·Open Type
  ·with Cage
  ·RNAST Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Inch Cam Followers - Full complement type, armored, CRV series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Shield Type
  ·With Screwdriver Slot
  ·CRV Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	5 Days or more

• 

  Inch Cam Followers - Full complement type, sealed, CRVUU series.

  IKO

  IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
  ·As studs already have threads or steps, they are easy to mount.
  ·Full Complement Type
  ·Sealed Type
  ·With Screwdriver Slot
  ·CRVUU Series

  • Volume Discount

  CAD ：

  3D

  Days to Ship:	8 Days or more

• 

  Eccentric Type Cam Followers - Caged with hex key hole, with seals, series CFEBUU.

  IKO

  In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
  
  •Eccentric Type
  
  •with Cage
  
  •Sealed
  
  •CFEBUU Series

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Pins for Cam Followers - Threaded.

  MISUMI

  •Category: Roller Follower Pin

  • Volume Discount
  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Pins for Cam Followers - With retaining ring.

  MISUMI

  •Category: Roller Follower Pin

  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Cam Followers - Resin.

  MISUMI

  The outer ring has a resin coating (Nylon MC). The outer ring can be flat or crowned. Tightening method can be flat or with hexagon keyway. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

Loading...