(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Cam Followers & Roller Followers（Shaft：Provided）
Category
-
Cam Followers -
Roller Follower -
Bracket for Cam Follower -
Roller Follower Pin
-
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· CF-AB model comes with hex holes at both ends of the stud and grease nipple for lubriction at the rear. Can be installed and refilled from both directions.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Standard Type Cam Followers - Caged, sealed type, CFBUU series.【1-10 Pieces Per Package】
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Hexagon Hole
·CFBUU Series- Volume Discount
Days to Ship: 5 Days or more -
Standard Type Cam Followers - Caged, shielded type, CFB series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
·CFB Series- Volume Discount
Days to Ship: 5 Days or more -
Cam Followers - Standard, CFV Series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Standard Type
·CFV Series- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
THK
This model is an economical Cam Follow having a driver groove or hexagon socket in the stud head. The all-stainless steel type (symbol M) is optimal for clean room applications since it does not develop rust from external atmosphere and generates little dust.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - With thrust balls, series CFN-R-A.
THK
It is compact and rigid shaft bearing with a needle bearing in the cam follower. Ideal for use as a linear motion guide roller in the cam mechanism of automatic and specialty machines
· [Type and features]
· The CFN-R-A model is a cam follower incorporating an internal thrust ball. It has the effect of preventing wear and friction on the sliding surface when a thrust load is applied due to mounting error.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
THK
Cam follower with an extremely fine needle roller.
[Features]
· Easy to use in limited spaces due to the small outer diameter- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
THK
[Features]-Since a hexagonal hole is provided on the stud head side, it can be easily installed with a hexagon wrench.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - CF-SFU Series.
THK
Type in which the uprights are staggered and can be fastened with screws to simplify installation. Ideal for equipment that does not have space for stud attachment. Type CF-SFU is only available with adhesive. The CF-SFU model is equipped with UU seals even when no UU symbol is used.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cylindrical Roller Cam Followers - Cageless type, with hexagonal key hole, NUCFBR series.
IKO
In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
·Full Complement
·with Hexagon hole
·NUCFBR Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days -
Cam Followers - Head with hexagon wrench socket, flat.
MISUMI
Cam follower outer diameter is flat, configurations available for general, high load or low particle emission applications. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
THK
Cam follower with stud head and screw section normally used for tap pipe processing.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Inch Cam Followers - Full complement type, armored, CRV series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement Type
·Shield Type
·With Screwdriver Slot
·CRV Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
- New Products
Cam Followers - Hexagon socket for head and shank, flat.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Standard Type Cam Followers - Caged, sealed type, series CFFBUU.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
Stainless Steel
·CFFBUU Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
MISUMI
•Shaft: Provided
•Roller Type: Cylindrical Outer Ring
•Category: Cam Followers
•Tightening Method: Hex Socket on Head
•Unit: Metric Series- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement
·Sealed Type
·With Hexagon Hole
·CFVBUUR Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Cam Followers - Straight slot, crowned.
MISUMI
They can be configured for a general application or for an application where low particulate emission is required (clean room). Options with or without seals. Outer diameters selectable in sizes from 13 to 35mm. Available in 52100 bearing steel or 440C stainless steel. Crowned type roller. Roller guiding method: retainer type.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Standard Type Cam Followers - Full complement type, with shield, CFVB series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement Type
·Shield Type
·With Hexagon Hole
·CFVB Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days or more -
C-Lube Cam Followers - Caged, with hexagonal bore, series CFWBUUR.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.
•As studs already have threads or steps, they are easyto mount.
•Cam Followers are follower bearings for cam mechanisms and linear motions and have high rigidity andhigh accuracy.
•Applications: formachine tools, industrial robots, electronic devices,and OA equipment.
•These Cam Followers are lubricated with C-Lube, a thermosetting solid-type lubricant which fills the inner space of the bearing.- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Cam Followers - Head with hexagon wrench socket, crowned.
MISUMI
Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - Threaded for grease fittings, flat.
MISUMI
The outer diameter of the cam follower is flat. The thread for the grease fitting can be M6 or BSPT 1/8. The material is 52100 bearing steel. The outer diameter is crowned and can be configured in sizes from 16 to 52mm. The nut to secure it is carbon steel. The grease fitting can be included, configured by alterations.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
- New Products
Cam Followers - Hexagon socket wrench head and shank, crowned.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
The outer ring has a resin coating (Nylon MC). The outer ring can be flat or crowned. Tightening method can be flat or with hexagon keyway. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Cam Followers - Threaded for grease fittings, crowned.
MISUMI
Tapped holes for grease fittings are provided. Installation is simple.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Miniature Cam Followers - Pusher disc, with cage, CFSW series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·Thrust Disk.
·with Cage
·with Hexagon Hole
·Stainless Steel
·CFSW Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days or more -
Solid Eccentric Cam Followers - Caged, shield type, series CFESB.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Solid Eccentric Stud
·With Cage
·Shield Type
·With Hexagon Hole
·CFESB Series- Volume Discount
Days to Ship: 5 Days or more -
Inch Cam Followers - Caged and with flat screwdriver slot, with shields, CR series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Screwdriver Slot
·CR Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Inch Cam Followers - Full complement type, sealed, series CRVBUU.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement Type
·Sealed Type
·With Hexagon Hole
·CRVBUU Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days or more -
Cam Followers - Straight groove, flat.
MISUMI
The outer diameter of the cam follower is flat. They can be configured for a general application or for an application where low particle emission is required (clean room). Available in 52100 bearing steel or 440C stainless steel. Cylindrical outer ring type roller. Roller guiding method: retainer type. Options with or without seals.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
This guide follower contains integrated ball bearings. Internal parts are 52100 bearing steel, external parts are stainless steel. The nut is stainless steel. The outer diameter of the follower is 10, 12, 13, 16 or 19mm.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Followers of Leva - Resin, crowned.
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: 8 Days or more -
THK
A cam follower where precision adjustment of the position is easily performed by turning the stud,
as the mounting shaft and head sections of the stud are eccentric by 0.25 mm to 1.0 mm.- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - CFH-AB Series.
THK
The cam follower is a compact and highly rigid shaft bearing with a needle bearing built in.Ideal as a cam mechanism for automatic machines and dedicated machines, and as a guide roller for linear motion.[Types and features]-The CFH-AB type is a cam follower whose position can be easily finely adjusted by turning the stud because the stud mounting shaft and stud head are eccentric by 0.25 mm to 1.0 mm.-For this reason, machining and assembly man-hours can be significantly reduced, such as alignment with the cam groove and precision machining of the mounting hole position.・ CFH-AB type …… With grease nipple and hexagonal hole. Corresponding stud diameter [mm] is 12 to 30.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - Pusher disc, caged and sealed.
IKO
This IKO product is provided with a thrust disk made of special synthetic resin excellent in abrasion resistance and heat resistance, so this thrust disk receives an axial load of the outer ring that is caused by mounting error to prevent the slide surface against friction and abrasion.
•These bearings have special resin thrust disk washers superior in wear and heat resistance between the sliding contact area of outer ring shoulders, stud head and side plate.
•These disk washers reduce friction and wear due to axial loads caused by misalignment.
•With Cage
•Hexagon Hole
•Sealed Type- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Standard Type Cam Followers - Caged, with shield, CFBR series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
Stainless Steel
·CFBR Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 10 Days or more -
Miniature Cam Followers - Stainless steel, CFSFV series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring. These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction. Also, they are designed to have minimal radial internal clearance to increase the loading zone, reducing the effect of shock loads and ensure stable long life.
·Miniature Type.
·Stainless Steel
·CFSFV Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Eccentric Cam Followers - For hex wrench, crowned.
MISUMI
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine adjust the position by turning the stem during assembly. Available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
- Volume Discount
- Spec Change
- Price Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Miniature Cam Followers - Thrust disc, with cage.
IKO
Miniature cam follower equipped with a thrust disk made of special synthetic resin with excellent resistance to abrasion and heat. This product receives an axial load from the outer ring caused by a mounting error to reduce friction and abrasion of the sliding surface. These bearings have special resin thrust disc washers with superior wear and heat resistance between the sliding contact area of the outer ring shoulders, stud head and side plate. These disc washers reduce friction and wear due to axial loads caused by misalignment, etc.
- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days or more -
Inch Cam Followers - Caged and with flat screwdriver slot, with seals, CRUU series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Sealed Type
·With Screwdriver Slot
·CRUU Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 5 Days or more -
Inch Cam Followers - With cage and hex key hole, with shields, series CRB.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·With Cage
·Shield Type
·With Hexagon Hole
·CRB Series- Volume Discount
Days to Ship: 8 Days or more -
Inch Cam Followers - Full complement type, sealed, CRVUU series.
IKO
IKO Cam Followers are bearings with a stud incorporating needle rollers in a thick walled outer ring.These bearings are designed for outer ring rotation,and have superior rotational performance with asmall coefficient of friction.Also, they are designed to have minimal radial internal clearance to increase the loading zone, and thusreduce the effect of shock loads and ensure stablelong life.
·As studs already have threads or steps, they are easy to mount.
·Full Complement Type
·Sealed Type
·With Screwdriver Slot
·CRVUU Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days or more -
Eccentric Type Cam Followers - Full complement type, Sealed, Series CFEVBUU.
IKO
In these bearings, an eccentric collar is assembled with the stud, enabling the outer ring to be positioned easily in the radial direction against the mating track surface. The eccentricity is 0.4 mm to 1.5 mm.
·Full Complement
·with Hexagon hole
·Sealed Type
·CFEVBUU Series- Volume Discount
- CAD ：
- 3D
Days to Ship: 8 Days -
Cam Followers - With urethane roller, crowned or flat.
MISUMI
Clamping method with flat groove. The outer diameter of the roller can be configured as crowned or flat. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Cam Followers - With urethane roller, crowned or flat, hexagonal wrench fastening.
MISUMI
Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Configurable carbon steel or stainless steel nuts. Maximum operating temperatures of 80°C. Outer ring coating urethane can be configured to A90 or A50 Shore hardness.
- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Category |
| Roller Type |
| Roller O.D. D(Ø) |
| Roller Width B(mm) |
| Roller Follower ID(mm) |
| Thread Size on Cam Follower (M)(mm) |
| Tightening Method |
| Cam Follower: Stud Screw (Fine Thread)(mm) |
| Material |
| Roller Lining |
| Cam Follower Type |
| Roller Follower Type |
| Shaft |
| Unit |
| Roller Guiding Method |
| Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | IKO | IKO | IKO | THK | THK | THK | THK | THK | IKO | MISUMI | THK | IKO | MISUMI | IKO | MISUMI | IKO | MISUMI | IKO | IKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | IKO | IKO | IKO | IKO | MISUMI | MISUMI | MISUMI | THK | THK | IKO | IKO | IKO | MISUMI | IKO | IKO | IKO | IKO | IKO | MISUMI | MISUMI |
| Product Series | Standard Type Cam Followers - Caged, sealed type, CFBUU series.【1-10 Pieces Per Package】 | Standard Type Cam Followers - Caged, shielded type, CFB series. | Cylindrical Roller Cam Followers - Cageless type, with hexagonal key hole, NUCFBR series. | Inch Cam Followers - Full complement type, armored, CRV series. | Standard Type Cam Followers - Caged, sealed type, series CFFBUU. | Standard Type Cam Followers - Full complement type, sealed type, CFVBUUR series. | Standard Type Cam Followers - Full complement type, with shield, CFVB series. | C-Lube Cam Followers - Caged, with hexagonal bore, series CFWBUUR. | Cam Followers - Hexagon socket wrench head and shank, crowned. | Miniature Cam Followers - Pusher disc, with cage, CFSW series. | Solid Eccentric Cam Followers - Caged, shield type, series CFESB. | Inch Cam Followers - Caged and with flat screwdriver slot, with shields, CR series. | Inch Cam Followers - Full complement type, sealed, series CRVBUU. | Standard Type Cam Followers - Caged, with shield, CFBR series. | Inch Cam Followers - Caged and with flat screwdriver slot, with seals, CRUU series. | Inch Cam Followers - With cage and hex key hole, with shields, series CRB. | Inch Cam Followers - Full complement type, sealed, CRVUU series. | Eccentric Type Cam Followers - Full complement type, Sealed, Series CFEVBUU. | Cam Followers - With urethane roller, crowned or flat, hexagonal wrench fastening. | ||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same day or more
Show Stock Products | 5 Days or more | 5 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products | 5 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 5 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 5 Days or more | 5 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 5 Days or more | 10 Days or more | 5 Days or more | 8 Days or more | 8 Days or more | 5 Days or more | 8 Days or more | 8 Days or more | 8 Days |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||
| Category | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers |
| Roller Type | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring |
| Roller O.D. D(Ø) | 30 ～ 72 | 10 ～ 90 | 10 ～ 90 | 13 ～ 19 | 13 ～ 26 | 13 ～ 22 | 5 ～ 12 | 10 ～ 26 | 16 ～ 52 | 22 ～ 62 | 10 ～ 26 | 16 ～ 90 | 12.7 ～ 57.15 | 30 ～ 52 | 10 ～ 52 | 5 ～ 12 | 16 ～ 90 | 13 ～ 32 | 16 ～ 62 | 16 ～ 52 | 10 ～ 32 | 16 ～ 52 | 30 ～ 52 | 13 ～ 26 | 16 ～ 52 | 4.5 ～ 12 | 16 ～ 40 | 12.7 ～ 57.15 | 12.7 ～ 47.625 | 13 ～ 35 | 10 ～ 19 | 13 ～ 35 | 13 ～ 26 | 30 ～ 80 | 19 ～ 32 | 10 ～ 52 | 4.5 ～ 12 | 16 ～ 35 | 4 ～ 12 | 12.7 ～ 57.15 | 15.875 ～ 57.15 | 12.7 ～ 44.45 | 22 ～ 62 | 13 ～ 26 | 13 ～ 26 |
| Roller Width B(mm) | 14 ～ 29 | 7 ～ 35 | 7 ～ 35 | 9 ～ 11 | 9 ～ 12 | 9 ～ 12 | 3 ～ 7 | 7 ～ 12 | 11 ～ 24 | 12 ～ 29 | 7 ～ 12 | 11 ～ 35 | 8.731 ～ 31.75 | 14 ～ 24 | 7 ～ 24 | 3 ～ 7 | 11 ～ 35 | 9 ～ 14 | 11 ～ 29 | 11 ～ 24 | 7 ～ 14 | 11 ～ 24 | 14 ～ 24 | 9 ～ 12 | 11 ～ 24 | 2.5 ～ 7 | 11 ～ 20 | 8.731 ～ 31.75 | 9.525 ～ 25.4 | 9 ～ 18 | 8.5 ～ 12 | 9 ～ 18 | 10 ～ 12 | 14 ～ 35 | 11 ～ 14 | 7 ～ 24 | 2.5 ～ 7 | 11 ～ 18 | 1.7 ～ 7 | 9.525 ～ 31.75 | 11.112 ～ 31.75 | 9.525 ～ 25.4 | 12 ～ 29 | 9 ～ 12 | 9 ～ 12 |
| Roller Follower ID(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Size on Cam Follower (M)(mm) | M12 ～ M20 | M 3x0.5 ～ M10x1.25 | 3 ～ M10x1.25 | 5 ～ 8 | M5 ～ M10 | M5 ～ M10 | M2.5 ～ M6 | M3 ～ M10 | M6 ～ M20 | M10x1.25 ～ M24x1.5 | M3 ～ M10 | M6 ～ M30 | UNF No.10-32 ～ 19.05 | M12 ～ M20 | M 3x0.5 ～ M10x1.25 | M2.5 ～ M6 | M 6x1 ～ M 10x1.25 | M5 ～ M16 | M 6x1 ～ M 10x1.25 | M 6x1 ～ 20 | M3 ～ M12 | M6 ～ M20 | M12 ～ M20 | M5 ～ M10 | M6 ～ M20 | M2 x0.4 ～ 6 | M 6x1 ～ 18 | 4.826 ～ 22.225 | 1/4 - 28 ～ 19.05 | M5 ～ M16 | M3 ～ M8 | M5 ～ M16 | M5 ～ M10 | M12 ～ M20 | M 8x1.25 ～ M10x1.25 | M 3x0.5 ～ 20 | M2x0.4 ～ M6x1 | M6 ～ M16 | M1.4x0.3 ～ 6 | 4.826 ～ 22.225 | 6.35 ～ 22.225 | 6.35 ～ 19.05 | M10x1.25 | M5 ～ M10 | M5 ～ M10 |
| Tightening Method | Hex Socket on Head, Thread Side | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head / With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head / With Driver Groove | With Driver Groove | Hex Socket on Head | Hex Socket on Head | With Driver Groove | Hex Socket on Head | With Driver Groove | Hex Socket on Head | Hex Socket on Head / Hex Socket on Head, Thread Side | Hex Socket on Head / With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head | Hex Socket on Head / Hex Socket on Head, Thread Side | Hex Socket on Head | With Driver Groove | Hex Socket on Head | With Driver Groove | Hex Socket on Head | With Driver Groove | Hex Socket on Head |
| Cam Follower: Stud Screw (Fine Thread)(mm) | M24 × 1.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | M30 × 1.5 | - | - | - | - | - | - | - | - | - | - | - |
| Material | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Stainless Steel | Stainless Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel |
| Roller Lining | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | With Resin | None | None | None | None | None | None | None | With Resin | None | None | None | None | None | None | None | None | None | None | None | With Urethane | With Urethane |
| Cam Follower Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | - | Standard | Standard | Standard | Standard / Tapped Hole for Mounting Type for Grease Nipple | Standard | - | Standard | - | - | Standard / Miniature | Standard / Eccentric | Standard | Standard | Standard | - | - | Eccentric | Eccentric | Standard | Standard | Miniature | Eccentric | Standard / Miniature | Standard | Standard | Standard | With Eccentric Collar | - | - |
| Roller Follower Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Shaft | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided |
| Unit | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Inch Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Inch Series | Inch Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Inch Series | Inch Series | Inch Series | Metric Series | Metric Series | Metric Series |
| Roller Guiding Method | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Full Roller Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Full Roller Type | Full Roller Type | Retainer Type | Retainer Type |
| Inner Ring | - | - | - | - | - | - | Provided | - | Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Roller Type
-
Spherical Outer Ring -
Cylindrical Outer Ring
-
-
Metric / Inch
- metric
-
Roller O.D. D(Ø)
-
Roller Width B(mm)
-
Roller Follower ID(mm)
-
Thread Size on Cam Follower (M)(mm)
- UNF No.10-32
- UNF 1/2-20
- 1/4 - 28
- M1.4x0.3
- 2
- M2 x0.4
- M2x0.4
- M2.5
- M2.5x0.45
- 3
- M3
- M3 x0.5
- M3x0.5
- M 3x0.5
- UNF 3/8-24
- 4
- M4
- M4 x0.7
- M4x0.7
- M 4x0.7
- 4.826
- 5
- M5
- M5 x0.8
- M5x0.8
- M 5x0.8
- UNF 5/8-18
- 6
- M6
- M6 x1
- M6x1
- M 6x1
- M 6x 1
- 6.350
- UNF 7/8-14
- UNF 7/16-20
- 8
- M8
- M 8x1.25
- M 8x 1.25
- 9.525
- 10
- M10
- 10-32
- M10x1.25
- M 10x1.25
- 11.112
- 12
- M12
- M12x1.5
- 12.700
- 15.875
- 16
- M16
- 18
- M18
- M18x1.5
- 19.050
- 20
- M20
- M20x1.5
- 22.225
- M24
- M24x1.5
- M30
-
Tightening Method
-
Hex Socket on Head -
Hex Socket on Head, Thread Side -
With Driver Groove
-
-
Cam Follower: Stud Screw (Fine Thread)(mm)
-
Material
- Carbon Steel
- Stainless Steel
-
Roller Lining
- None
- With Resin
- With Urethane
-
Cam Follower Type
-
Roller Follower Type
-
Shaft
-
Unit
-
Roller Guiding Method
-
Inner Ring
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 5 Days or Less
- 6 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 13 Days or Less
- 14 Days or Less
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy