(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 4/20/2024 to 5:00 p.m. (CDT) 4/21/2024. We apologize for the inconvenience.
Manual XY-Axis Stages（Load Capacity (Range)：50.1 to 100）
| Days to Ship |
|
|---|
-
Manual XY-Axis Symmetrical Use Stages - Linear Ball Guide, Feed Screw, Pitch 0.5, DSXYSGB/DSXYSCG
MISUMI
Symmetrical Stack, XY-axis Stages usable in limited spaces
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, High Accuracy, XYSG/XYSGB/XYSCG/XYSCGB
MISUMI
Low Temperature Black Chrome Plating Adopted for Surface Treatment. Suitable for Reflection Prevention.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, Low Profile, Stainless Steel, BSS23
Suruga Seiki
A low profile linear ball guide stage (XY-axis) with an integrated XY-axis structure.[Features]・ Achieved high stiffness and high accuracy by adopting stainless steel as the body material and gothic arch grooves in the guide part.
・ The thickness of the main body can be reduced compared to the single axis combination. ・ Stage sizes available are 40 mm, 50 mm, 60 mm, 70 mm, 80 mm, and 100 mm square
[Applications]・ Ideal for fine positioning as a sample inspection table.
・ Ideal for adjusting the dispenser head.
・ Ideal for CCD camera alignment.- Volume Discount
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - Cross Roller Guide, Through Hole, B27
Suruga Seiki
A through-hole type cross roller guide (XY-axis) with an integrated XY-axis structure.[Features]・ Lightweight because aluminum is used for the main body material. · The thickness of the body can be reduced compared to a single-axis combination. ・ The diameter of the through-hole is ø50 (diameter: 50 mm), and ø40 (diameter: 40 mm) is maintained even when the stroke is made to XY.
·
[Applications]・ Ideal for fine positioning as a sample inspection table.
・ Ideal for adjusting the dispenser head.
・ Ideal for CCD camera alignment.- Volume Discount
Days to Ship: 8 Days or more -
Suruga Seiki
A linear ball guide stage (XY-axis) that achieves "high stiffness and high accuracy."[Features]・ Achieved high stiffness and high accuracy by adopting stainless steel as the body material and gothic arch grooves in the guide part.
・ The perpendicularity of assembly is within 10 μm.
・ Four types of stage surface sizes are available: 25 × 25 mm, 40 × 40 mm, 60 × 60 mm, and 80 × 80 mm square.
・ The feed position can be selected from the center or the side drive.
・ A wide variety of feeding methods are available.
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount
- CAD ：
- 3D
Days to Ship: 11 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, High Accuracy, Coarse/Fine Micrometer Heads, XYSKG
MISUMI
Low Temperature Black Chrome Plating Adopted for Surface Treatment. Suitable for Reflection Prevention.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, Low Profile, High Accuracy, XYSSG/XYSSCG
MISUMI
Integrated Structure of XY Axes realized Further Thinness.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - Cross Roller Guide, High Accuracy, XYPG/XYPGN/XYPCG
MISUMI
Lightweight and High Precision Cross Roller Stages made of aluminum alloy.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - Cross Roller Guide, Thru Hole, XYPPG
MISUMI
Lightweight and High Precision Cross Roller Stages with table through holes made of aluminum alloy.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual Stages - Configurable X/XY/Z-Axis Stages
MISUMI
Selectable kinds of Feed Position, Feed/Clamping Methods and Grease.
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - Cross Roller Guide, Standard Accuracy, XYCRS
MISUMI
Stage with a micrometer head capable of 0.01mm resolution adjustments.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: Same day Show Stock Products
-
MISUMI
By using Opposed Clamps, the vibration resistance is improved and the greater locking power is ensured without having to use tools!
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, Micrometer Head, XYLBS
MISUMI
Guide-integrated Linear Ball mechanism achieves high load capacity while ensuring accuracy.
- Volume Discount
- Spec Change
- Price Reduction
- inCAD Components
Days to Ship: 8 Days or more -
Manual XY-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B21
Suruga Seiki
A light weight, high accuracy cross roller guide type stage (XY-axis).[Features]・ The main material is aluminum, so it is lightweight
・ High-accuracy stage with high rigidity, low friction and excellent minute feeding
・ Size, feed position, orientation specifications, feed method can be selected as options
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, Stainless Steel, Electroless Nickel Plating, BSS26
Suruga Seiki
A highly accurate, high rigidity linear ball guide type stage (XY-axis).[Features]・ Achieved high stiffness and high accuracy by adopting stainless steel as the body material and gothic arch grooves in the guide part.
・ The perpendicularity of assembly is within 10 μm.
・ There are 7 stage surface sizes available: 25 × 25 mm, 40 × 40 mm, 50 × 50 mm, 60 × 60 mm, 70 × 70 mm, 80 × 80 mm, and 100 × 100 mm square.
・ The feed position can be selected from the center or the side drive.
・ A wide variety of feeding methods are available.
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount
Days to Ship: 10 Days or more -
Manual XY-Axis Stages - V-Groove Cross Roller Guide, High-Grade Aluminum, 30 x 30 mm
Chuo Precision Industrial
[Features]
•Offers both rigidity and low weight by utilizing aluminum alloy as the main material and an HG-VCR guidance method
•Standard and inverse models available, giving left/right symmetry
•Standard micron and fine pitch micron feeds available
•Wide-ranging applications, for example, positioning of cameras, sensors, and other items- Volume Discount
Days to Ship: 11 Days or more -
Manual XY-Axis Stages - V-Groove Cross Roller Guide, High-Grade Aluminum, 40 x 40 mm
Chuo Precision Industrial
A HG-VCR automatic stage with high precision and rigidity.
- Volume Discount
Days to Ship: 13 Days or more -
Manual XY-Axis Stages - Slim Profile
Chuo Precision Industrial
[Features]
· Thin-type stage using a V-groove and a cross roller (V-CR type) for the travel guide.
· The operating section can be attached at the center, the side, and the opposite side.
· Can be used for a wide range of purposes such as precise positioning of the work and a sampling stage of measurement equipment.- Volume Discount
Days to Ship: 8 Days or more -
Manual XY-Axis Stages - Fixed Position
Chuo Precision Industrial
Clampless XY-axis fixed stage that stays in place after position adjustment.
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Patent obtained.
· Use hex wrench to adjust position.
· Virtually no clamp screws or other projections from the main stage body.
· Can be installed horizontally, vertically or upside-down (load capacity restriction depends on the installation orientation).
[Applications]
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment.- Volume Discount
Days to Ship: 11 Days or more -
Manual XY-Axis Stages - Linear Ball Guide, Low Cost, BYT
Suruga Seiki
A "low price and high stiffness" steel linear ball guide stage (XY-axis).[Features]・ Achieved the low price equivalent to the dovetail stage due to its own production method.
・ The moment stiffness equivalent to that of the SS stage is maintained, and it can be used with confidence even in the center of gravity at the overhang position
[Applications]・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Travel (X Distance) Range(mm) |
| Travel (Y Distance) Range(mm) |
| Load Capacity (Range)(N) |
| Table Size (Length) L (Range)(mm) |
| Table Size (Width) W (Range)(mm) |
| Table Size (Thickness) H (Range)(mm) |
| Feeding Method |
| Guiding Mechanism |
| Table Material |
| Table Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | Suruga Seiki | Suruga Seiki | Suruga Seiki | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | Suruga Seiki | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Suruga Seiki |
| Product Series | Manual XY-Axis Symmetrical Use Stages - Linear Ball Guide, Feed Screw, Pitch 0.5, DSXYSGB/DSXYSCG | Manual XY-Axis Stages - Linear Ball Guide, High Accuracy, XYSG/XYSGB/XYSCG/XYSCGB | Manual XY-Axis Stages - Linear Ball Guide, Low Profile, Stainless Steel, BSS23 | Manual XY-Axis Stages - Cross Roller Guide, Through Hole, B27 | Manual XY-Axis Stages - Linear Ball Guide, High Accuracy, Coarse/Fine Micrometer Heads, XYSKG | Manual XY-Axis Stages - Linear Ball Guide, Low Profile, High Accuracy, XYSSG/XYSSCG | Manual XY-Axis Stages - Cross Roller Guide, High Accuracy, XYPG/XYPGN/XYPCG | Manual XY-Axis Stages - Cross Roller Guide, Thru Hole, XYPPG | Manual XY-Axis Stages - Cross Roller Guide, Standard Accuracy, XYCRS | Manual XY-Axis Stages - Linear Ball Guide, Micrometer Head, XYLBS | Manual XY-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B21 | Manual XY-Axis Stages - Linear Ball Guide, Stainless Steel, Electroless Nickel Plating, BSS26 | Manual XY-Axis Stages - V-Groove Cross Roller Guide, High-Grade Aluminum, 30 x 30 mm | Manual XY-Axis Stages - V-Groove Cross Roller Guide, High-Grade Aluminum, 40 x 40 mm | ||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 12 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 12 Days or more | 10 Days or more |
Same day
Show Stock Products | 12 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 13 Days or more | 8 Days or more | 11 Days or more | 13 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
| |||||||||||
| Travel (X Distance) Range(mm) | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | ±10 to 30mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm | - | - | - | - | Up to ±10mm |
| Travel (Y Distance) Range(mm) | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | ±10 to 30mm | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm | - | - | - | - | Up to ±10mm |
| Load Capacity (Range)(N) | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 | 50.1 to 100 |
| Table Size (Length) L (Range)(mm) | 26 to 40 | 26 to 40 | 26 to 40 | 91 to 120 | 26 to 40 | 26 to 40 | 26 to 40 | 61 to 90 | 91 to 120 | 26 to 40 ～ 61 to 90 | 61 to 90 | 26 to 40 | 26 to 40 | 61 to 90 | 26 to 40 | 41 to 60 ～ 61 to 90 | 26 to 40 | 61 to 90 | 41 to 60 | 26 to 40 |
| Table Size (Width) W (Range)(mm) | 26 to 40 | 26 to 40 | 26 to 40 | 91 to 120 | 26 to 40 | 26 to 40 | 26 to 40 | 61 to 90 | 91 to 120 | 26 to 40 ～ 61 to 90 | 61 to 90 | 26 to 40 | 26 to 40 | 61 to 90 | 26 to 40 | 41 to 60 ～ 61 to 90 | 26 to 40 | 61 to 90 | 41 to 60 | 26 to 40 |
| Table Size (Thickness) H (Range)(mm) | 30.1 to 35 | 30.1 to 35 | 20.1 to 25 | 25.1 to 30 | 30.1 to 35 | 30.1 to 35 | 20.1 to 25 | 35.1 to 40 | 25.1 to 30 | 15.1 to 20 ～ 30.1 to 35 | 35.1 to 40 | 30.1 to 35 | 35.1 to 40 | 35.1 to 40 | 30.1 to 35 | - | - | - | - | 35.1 to 40 |
| Feeding Method | Feed Screw | Feed Screw | - | - | Feed Screw / Micrometer Heads | - | Feed Screw | Feed Screw | - | - | - | - | - | - | - | Feed Screw / Micrometer Heads | Micrometer Heads | Micrometer Heads | Feed Screw | Micrometer Heads |
| Guiding Mechanism | Linear Ball | Linear Ball | Linear Ball | Cross Roller | Linear Ball | Linear Ball | Linear Ball | Cross Roller | Cross Roller | Cross Roller / Linear Ball | Cross Roller | Linear Ball | Linear Ball | Cross Roller | Linear Ball | Cross Roller | Cross Roller | Cross Roller | Slide Guide | Linear Ball |
| Table Material | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum | Stainless Steel | Stainless Steel | Stainless Steel | Aluminum Alloy | Aluminum Alloy | Stainless Steel / Aluminum Alloy | Aluminum Alloy | Stainless Steel | Stainless Steel | Aluminum | Stainless Steel | Aluminum Alloy | Stainless Steel | Aluminum Alloy | Aluminum Alloy | Steel |
| Table Surface Treatment | Electroless Nickel / Low Temperature Black Chrome | Electroless Nickel / Low Temperature Black Chrome | Electroless Nickel | Black Anodize | Low Temperature Black Chrome | Electroless Nickel | Electroless Nickel | Black Anodize | Black Anodize | Black Anodize / Electroless Nickel | Black Anodize | Electroless Nickel | Electroless Nickel | Black Anodize | Electroless Nickel | Black Anodize | Low Temperature Black Chrome | Black Anodize | Black Anodize | Electroless Nickel |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Travel (X Distance) Range(mm)
- Up to ±10mm
- ±10 to 30mm
- ±30mm or More
-
Travel (Y Distance) Range(mm)
- Up to ±10mm
- ±10 to 30mm
- ±30mm or More
-
Load Capacity (Range)(N)
- 1 to 4.9
- 5 to 30
- 30.1 to 50
- 50.1 to 100
- 100.1 or More
-
Table Size (Length) L (Range)(mm)
-
Table Size (Width) W (Range)(mm)
-
Table Size (Thickness) H (Range)(mm)
-
Feeding Method
- Rack & Pinion
- Feed Screw
- Micrometer Heads
-
Guiding Mechanism
- Dovetail Slide
- Cross Roller
- Linear Ball
- Slide Guide
- Dovetail, Feed Screw
-
Table Material
- Steel
- Stainless Steel
- Aluminum
- Brass
- Aluminum Alloy
-
Table Surface Treatment
- None
- Black Anodize
- Black Oxide
- Electroless Nickel
- Low Temperature Black Chrome
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Manual XY-Axis Stages
-
- Base Plates for Manual Stages
- Brackets for Manual Stages
- Manual Goniometer Stages
- Manual Multi-Axis Stages
- Manual Rotary Stages
- Manual Tilt Stages
- Manual X-Axis Stages
- Manual XY-Axis Stages
- Manual XYZ-Axis Stages
- Manual XZ-Axis Stages
- Manual Z-Axis Stages
- Micrometer Heads & Feed Screws
- Mounting Accessories for CCD Cameras
- Positioning Stage Suction Plates
- Rods, Mounts & Cross Clamps
- Scales for Manual Stages
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy