(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Manual X-Axis Stages（Table Surface Treatment：Black Anodize）
| Days to Ship |
|
|---|
-
Manual X-Axis Stages - High Precision, Linear Guide, XLSG
MISUMI
Linear Guide Type Long Stroke Stages with high load capacity.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, XLWG
MISUMI
Light-Weight/Low Cost Long Stroke Stage. Please select a size based on strokes needed.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High Precision, Cross Roller, XPG
MISUMI
Lightweight and High Precision Cross Roller Stages made of aluminum alloy.
- Volume Discount
- Lead Time Reduction
- inCAD Components
Days to Ship: 10 Days or more -
- On Sale Till 07/03/2025
Manual X-Axis Stages - Cross Roller, XCRS
MISUMI
Stage with a micrometer head capable of 0.01mm resolution adjustments.
- Volume Discount
- New Pricing
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Manual X-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B11
Suruga Seiki
A light weight, high accuracy cross roller guide type stage.
[Features]
・ The main material is aluminum, so it is lightweight
・ High-accuracy stage with high rigidity, low friction and excellent minute feeding
・ Size, feed position, orientation specifications, feed method can be selected as options
[Applications]
・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, Multiple Blocks, XLONG
MISUMI
Light-Weight/Low Cost Long Stage. Selectable Sizes in accordance with required Strokes.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High Precision, Rectangular Dovetail, Low Profile, XSLC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High Precision, Square Dovetail, Standard, XSC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High Precision, Dovetail Rack & Pinion, Compact, XSP
MISUMI
Slim-shaped Type Dovetail Slide Rack & Pinion Stages.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, XFG
MISUMI
This is Square form factor Dovetail Slide Rack & Pinion stage.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
- On Sale Till 07/03/2025
Manual X-Axis Stages - Dovetail with Vernier Scale, XDTS
MISUMI
Rapid feed rack and pinion stage. More economical than the conventional products.
- Volume Discount
- New Pricing
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Manual X-Axis Stages - Long Travel, Dovetail with Vernier Scale, XDTLS
MISUMI
Long stroke rack & pinion stage offered at an economical price.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail Feed Screw, XFES
MISUMI
Feed Screw Stages with fine feeding of 0.5mm lead.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: 8 Days or more -
- New Products
Manual X-Axis Stages - Dovetail, Feed Screw, Long, Selectable Lead, XLSL
MISUMI
Dovetail Slide Feed Screw stage with selectable screw lead in 2mm, 5mm, 10mm. Long strokes equivalent of Rack & Pinion stages. Also suitable for vertical use.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Slide Guide, Long Stroke, B15
Suruga Seiki
A long stroke stage (X-axis) using a slide guide.
[Features]
・ Ideal for loading heavy objects, moving/retracting large size workpieces, switching optical systems, etc.
・ The travel length can be adjusted by changing the stopper position on the side surface
[Applications]
・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack and Pinion, B05/B06
Suruga Seiki
A rack and pinion type stage (X-axis) that is ideal for making quick and large movements.
[Features]
・ It consists of a rack rail and a pinion gear, and can be moved greatly with 1 rotation of the handle
・ Ideal for easy alignment and evacuation
・ B05 adopts the original clamp and can be clamped with a single-action
・ With a vernier scale (0.1 mm)
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components.
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack Rail, BDLXB/BDLXR
Suruga Seiki
A dovetail rack and pinion long stroke stage (X-axis).
[Features]
・ The rail type consisting of a rack rail and a pinion gear
・ The tap seat type that can be attached from the back
・ Multiple blocks with a stage surface of 40 mm can be mounted
・ The differential micrometer of block handle can be selected
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High-Grade Aluminum
Chuo Precision Industrial
A lightweight, rigid HG-VDR stage that uses aluminum alloy as its main material.
- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail
Chuo Precision Industrial
An X-axis mobile unit that handles differing feed methods within a space measuring 30 mm × 30 mm.
- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Coarse/Fine Adjustment, XSFG
MISUMI
This is Square form factor Dovetail Slide Rack & Pinion stage.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
- On Sale Till 07/03/2025
Manual X-Axis Stages - Dovetail, Rack & Pinion, XWG
MISUMI
Standard dovetail, rack and pinion stage product.
- Volume Discount
- inCAD Components
Special Price Days to Ship: Same day or more Show Stock Products
-
Manual X-Axis Stages - Dovetail, Rack & Pinion, Replaceable Screw, XWGL
MISUMI
Utilization of Tape Hole extends Handle Length.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual X-Axis Stages - High Precision, Rectangular Dovetail, Standard, XSL
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - High Precision, Dovetail, Slim Low Profile, XSSLC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Multi-Mount, Doveteil Groove, Rack & Pinion, Coarse/Fine Adjustment, XSB
MISUMI
Suitable for applications when Both Rapid Feed and Fine Adjustment are required.
- Volume Discount
- inCAD Components
Days to Ship: 15 Days or more -
Manual X-Axis Stages - High Precision, Dovetail, Slim, XSSL
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Cross Roller, Long Stroke, XLPG
MISUMI
Cross Roller Type Long Stroke Stages allowing for adjustment of coarse feed and fine feed.
- Volume Discount
- inCAD Components
Days to Ship: 10 Days or more -
Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Thin, Replaceable Screw, XSCL
MISUMI
Feed screw type dovetail stages. The handle can be extended by utilizing the M6 tap.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Tamper Proof Adjustment, XSLCL
MISUMI
Dovetail Slide Stage with position holding performance improved by clamping the feed knob shaft directly.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Tamper Proof Adjustment, XWGCL
MISUMI
Dovetail slide rack & pinion stage with feed knob clamp for better position holding.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, Blocks Selectable, XLARGE
MISUMI
Long Stroke Stages allowing to select length of rail and the type/number of block freely.
- Volume Discount
- inCAD Components
Days to Ship: 12 Days or more -
Manual X-Axis Stages - Dovetail, Rack & Pinion, Rectangle, Low Profile, XDTSC
MISUMI
X-axis Rack & Pinion stages with low profile (26mm thick).
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Rapid Feed Screw, XFHT
MISUMI
Dovetail Slide Stages with smooth 4.2mm lead feed screw is released now with an economical price.
- Volume Discount
- New Pricing
- inCAD Components
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Cross Roller Guide, Long Stroke, B12
Suruga Seiki
A "high accuracy long stroke" cross and roller guide stage (X-axis).
[Features]
· Long stroke from stage size 25 × 25 mm and 60 × 60 mm
・ For B12-25, the differential micrometer is selectable
・ B12-60 can be positioned with the coarse adjustment knob, and fine adjustment can be done with the micrometer.
[Application]
· Precision adjustment of cameras, microscopes, sensors, and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Dovetail, Feed Screw, Short Lead, B08/BDBXS/BDBXR
Suruga Seiki
A feed screw type dovetail stage (X-axis) with a wide range of sizes and strokes.
[Features]
・ It is composed of a nut and a feed screw on the main body side, and fine adjustment is possible compared to a rack and a pinion
・ The feed method can be selected from the knob type or the hex key operation type
・ The hex key operation type is space-saving and effective in preventing erroneous operation
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 11 Days or more -
Manual X-Axis Stages - Dovetail, Feed Screw, Long Lead, B05
Suruga Seiki
A feed screw long lead type dovetail stage (X-axis).
[Features]
・ It is composed of a nut and a feed screw on the main body side, and fine adjustment is possible compared to a rack and a pinion
・ The clamp adopts a lever type
・ With a vernier scale (0.1 mm)
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Cross Roller Guide, High-Resolution, B10
Suruga Seiki
A high-resolution type cross roller guide stage (X-axis).
[Features]
・ Differential micrometer operation is possible with 2 micrometers
・ Fine adjustment is possible within ±0.3 mm from the position moved by coarse movement
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.- Volume Discount
Days to Ship: 11 Days or more -
Manual X-Axis Stages - Cross Roller, Aluminum, TAM
NBK
Aluminum stage.
[Features]
- 4 different stage sizes.
- Aluminum.
- Lightweight.
- Uses a V groove rail and cross roller for the travel guide.
- Micrometer feed type.
- 0.01 m feeding display resolution.
- Stage/main body materials: Aluminum alloy and anodization (black).- Volume Discount
Days to Ship: 11 Days or more -
Manual X-Axis Stages - Slim Profile
Chuo Precision Industrial
[Features]
· A thin type lightweight stage that uses a V groove and cross roller (V-CR type) for the movement guide.
· The operating section can be attached on the center, the side, and the reverse side.
· Can be used for a wide range of purposes such as precise positioning of the work piece and as a sampling stage of measurement equipment.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Fixed Position Type, Standard
Chuo Precision Industrial
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use a hex wrench to adjust the position.* Hex wrench not included.
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· Can be installed horizontally, vertically or upside-down.
· Rotary stage has a transmission hole at its center.- Volume Discount
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Fixed Position Type, Low Profile
Chuo Precision Industrial
Similar to a conventional fixed stage, but takes up no more room than a spacer. Especially handy for use in space-constrained situations thanks to its special clamp-free operation.
[Features]
▪ Employs a lock-less mechanism; the stage will not move once set in position
▪ Natural self-locking design prevents backlash
▪ Amazingly thin compared to conventional stages
▪ Position workpieces in no more width than a spacer occupies (8 mm)- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Manual X-Axis Stages - Front Lock
Miruc Optical
Changing the thinking around miniature stages
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Manual X-Axis Stages - Dovetail, Square Type, Low Cost, XMA
Miruc Optical
Achieves a reduction in costs via a reduction in parts quantity and man-hours.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 12 Days or more -
Manual X-Axis Stages - Dovetail, Low Cost, XMB
Miruc Optical
Achieves a reduction in costs via a reduction in parts quantity and man-hours.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Travel (Range) |
| Load Capacity (Range)(N) |
| Table Length L (Range)(mm) |
| Table Width W (Range)(mm) |
| Overall Height (Range)(mm) |
| Feeding Method |
| Guiding Mechanism |
| Table Material |
| Table Surface Treatment |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | Suruga Seiki | Suruga Seiki | Chuo Precision Industrial | Chuo Precision Industrial | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | Suruga Seiki | Suruga Seiki | Suruga Seiki | NBK | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Miruc Optical | Miruc Optical | Miruc Optical |
| Product Series | Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, XLWG | Manual X-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B11 | Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, Multiple Blocks, XLONG | Manual X-Axis Stages - High Precision, Rectangular Dovetail, Low Profile, XSLC | Manual X-Axis Stages - High Precision, Square Dovetail, Standard, XSC | Manual X-Axis Stages - High Precision, Dovetail Rack & Pinion, Compact, XSP | Manual X-Axis Stages - Long Travel, Dovetail with Vernier Scale, XDTLS | Manual X-Axis Stages - Dovetail, Feed Screw, Long, Selectable Lead, XLSL | Manual X-Axis Stages - Dovetail, Rack & Pinion, Coarse/Fine Adjustment, XSFG | Manual X-Axis Stages - Dovetail, Rack & Pinion, Replaceable Screw, XWGL | Manual X-Axis Stages - High Precision, Rectangular Dovetail, Standard, XSL | Manual X-Axis Stages - High Precision, Dovetail, Slim Low Profile, XSSLC | Manual X-Axis Stages - Multi-Mount, Doveteil Groove, Rack & Pinion, Coarse/Fine Adjustment, XSB | Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Thin, Replaceable Screw, XSCL | Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Tamper Proof Adjustment, XSLCL | Manual X-Axis Stages - Dovetail, Rack & Pinion, Tamper Proof Adjustment, XWGCL | Manual X-Axis Stages - Dovetail, Rack & Pinion, Long Stroke, Blocks Selectable, XLARGE | Manual X-Axis Stages - Dovetail, Rack & Pinion, Rectangle, Low Profile, XDTSC | Manual X-Axis Stages - Dovetail, Feed Screw, Short Lead, B08/BDBXS/BDBXR | Manual X-Axis Stages - Cross Roller Guide, High-Resolution, B10 | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Days to Ship | 12 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 12 Days or more | 8 Days or more | 8 Days or more | 15 Days or more | 8 Days or more | 10 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 12 Days or more | 13 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
| Travel (Range) | ±30mm or More | ±10 to 30mm / ±30mm or More | Up to ±10mm / ±10 to 30mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm / ±10 to 30mm | ±30mm or More | ±10 to 30mm / ±30mm or More | ±10 to 30mm | ±10 to 30mm / ±30mm or More | Up to ±10mm / ±10 to 30mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | Up to ±10mm | ±10 to 30mm / ±30mm or More | ±30mm or More | Up to ±10mm / ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | - | - | Up to ±10mm / ±10 to 30mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | ±10 to 30mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | Up to ±10mm / ±10 to 30mm | ±10 to 30mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | ±30mm or More | ±10 to 30mm / ±30mm or More | Up to ±10mm / ±10 to 30mm / ±30mm or More | Up to ±10mm / ±10 to 30mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm / ±10 to 30mm | - | - | - | - | - | - |
| Load Capacity (Range)(N) | 100.1 or More | 5 to 30 | 5 to 30 / 30.1 to 50 / 50.1 to 100 / 100.1 or More | 5 to 30 / 30.1 to 50 / 50.1 to 100 / 100.1 or More | 5 to 30 / 30.1 to 50 / 50.1 to 100 / 100.1 or More | 30.1 to 50 | 5 to 30 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 | 100.1 or More | 5 to 30 / 30.1 to 50 | 5 to 30 | 5 to 30 / 30.1 to 50 / 50.1 to 100 | 1 to 4.9 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 30.1 to 50 | 5 to 30 | 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 50.1 to 100 | 5 to 30 | 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 / 50.1 to 100 | 5 to 30 | 5 to 30 / 30.1 to 50 | 30.1 to 50 / 50.1 to 100 | 5 to 30 / 50.1 to 100 / 100.1 or More | 50.1 to 100 | 30.1 to 50 / 50.1 to 100 | 5 to 30 | 100.1 or More | 100.1 or More | 100.1 or More |
| Table Length L (Range)(mm) | 61 to 90 | 41 to 60 | Up to 25 ～ 91 to 120 | Up to 25 ～ 91 to 120 | Up to 25 ～ 91 to 120 | 41 to 60 | 41 to 60 ～ 61 to 90 | 26 to 40 ～ 41 to 60 | 41 to 60 ～ 91 to 120 | 26 to 40 ～ 41 to 60 | 41 to 60 ～ 61 to 90 | 41 to 60 | Up to 25 ～ 41 to 60 | 26 to 40 | 61 to 90 | 26 to 40 ～ 41 to 60 | 26 to 40 | 26 to 40 ～ 61 to 90 | 26 to 40 | 26 to 40 ～ 41 to 60 | 41 to 60 ～ 121 or More | 41 to 60 ～ 121 or More | 41 to 60 ～ 61 to 90 | 41 to 60 | 41 to 60 ～ 61 to 90 | 41 to 60 ～ 91 to 120 | 41 to 60 ～ 91 to 120 | 26 to 40 ～ 41 to 60 | 41 to 60 ～ 61 to 90 | 41 to 60 ～ 121 or More | 26 to 40 | 41 to 60 ～ 61 to 90 | 26 to 40 ～ 61 to 90 | 41 to 60 ～ 91 to 120 | 41 to 60 | 26 to 40 ～ 61 to 90 | 41 to 60 ～ 61 to 90 | 26 to 40 ～ 91 to 120 | 61 to 90 | 26 to 40 ～ 41 to 60 | 26 to 40 ～ 41 to 60 | - | - | - |
| Table Width W (Range)(mm) | 61 to 90 | Up to 25 | Up to 25 ～ 91 to 120 | Up to 25 ～ 91 to 120 | Up to 25 ～ 91 to 120 | 26 to 40 | 26 to 40 | 26 to 40 ～ 41 to 60 | Up to 25 | 26 to 40 ～ 41 to 60 | 26 to 40 | 26 to 40 | Up to 25 ～ 41 to 60 | Up to 25 | 61 to 90 | 26 to 40 ～ 91 to 120 | 26 to 40 | 26 to 40 ～ 61 to 90 | 26 to 40 ～ 121 or More | 26 to 40 ～ 41 to 60 | Up to 25 ～ 26 to 40 | Up to 25 ～ 26 to 40 | 26 to 40 | Up to 25 | 26 to 40 | Up to 25 | Up to 25 ～ 41 to 60 | 26 to 40 ～ 41 to 60 | 26 to 40 | Up to 25 ～ 26 to 40 | 26 to 40 | 26 to 40 | 26 to 40 ～ 41 to 60 | Up to 25 ～ 41 to 60 | Up to 25 | 26 to 40 | 41 to 60 ～ 61 to 90 | 26 to 40 ～ 91 to 120 | 61 to 90 | 26 to 40 ～ 41 to 60 | 26 to 40 ～ 41 to 60 | - | - | - |
| Overall Height (Range)(mm) | 25.1 to 30 | 20.1 to 25 | 1 to 15 ～ 25.1 to 30 | 1 to 15 ～ 15.1 to 20 | 1 to 15 ～ 25.1 to 30 | 35.1 to 40 | 15.1 to 20 | 15.1 to 20 | 25.1 to 30 | 30.1 to 35 ～ 35.1 to 40 | 30.1 to 35 | 25.1 to 30 | 1 to 15 ～ 15.1 to 20 | 20.1 to 25 | 25.1 to 30 | 25.1 to 30 ～ 35.1 to 40 | 25.1 to 30 | - | - | 35.1 to 40 | 30.1 to 35 | 30.1 to 35 | 25.1 to 30 | 15.1 to 20 | 30.1 to 35 | 25.1 to 30 | 15.1 to 20 ～ 30.1 to 35 | 15.1 to 20 | 25.1 to 30 | 30.1 to 35 | 25.1 to 30 | 25.1 to 30 | 1 to 15 ～ 15.1 to 20 | 15.1 to 20 ～ 30.1 to 35 | 25.1 to 30 | 25.1 to 30 | 25.1 to 30 | 15.1 to 20 ～ 20.1 to 25 | - | - | - | - | - | - |
| Feeding Method | Feed Screw | Rack & Pinion | Micrometer Head | Micrometer Head | Feed Screw / Micrometer Head | Rack & Pinion | Feed Screw | Feed Screw | Rack & Pinion | Rack & Pinion | Rack & Pinion | Rack & Pinion | Feed Screw | Feed Screw | Feed Knob | Rack & Pinion | Rack & Pinion | Feed Screw / Micrometer Head | Rack & Pinion | Rack & Pinion | Rack & Pinion | Rack & Pinion | Feed Screw | Feed Screw | Rack & Pinion | Feed Screw | Micrometer Head | Feed Screw | Feed Screw | Rack & Pinion | Rack & Pinion | Rack & Pinion | Feed Screw | Micrometer Head | Feed Screw | Feed Screw | Micrometer Head | Micrometer Head | Micrometer Head | Feed Screw | Feed Screw | Handles | Handles | Handles |
| Guiding Mechanism | Liner Guides | Dovetail Slide | Cross Roller | Cross Roller | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Liner Guides | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide | Dovetail Slide | Cross Roller | Cross Roller | Cross Roller | Slide Guide | Slide Guide | Dovetail Slide | Dovetail Slide | Dovetail Slide |
| Table Material | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum | Aluminum | Aluminum | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy |
| Table Surface Treatment | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Travel (Range)
- Up to ±10mm
- ±10 to 30mm
- ±30mm or More
-
Load Capacity (Range)(N)
- 1 to 4.9
- 5 to 30
- 30.1 to 50
- 50.1 to 100
- 100.1 or More
-
Table Length L (Range)(mm)
-
Table Width W (Range)(mm)
-
Overall Height (Range)(mm)
-
Feeding Method
- Rack & Pinion
- Feed Screw
- Micrometer Head
- Handles
- Feed Knob
-
Guiding Mechanism
- Dovetail Slide
- Cross Roller
- Linear Ball
- Slide Guide
- Liner Guides
-
Table Material
- Steel
- Stainless Steel
- Aluminum
- Brass
- Aluminum Alloy
-
Table Surface Treatment
- None
- Black Anodize
- Black Oxide
- Electroless Nickel
- Low Temperature Black Chrome
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Manual X-Axis Stages
-
- Base Plates for Manual Stages
- Brackets for Manual Stages
- Manual Goniometer Stages
- Manual Multi-Axis Stages
- Manual Rotary Stages
- Manual Tilt Stages
- Manual X-Axis Stages
- Manual XY-Axis Stages
- Manual XYZ-Axis Stages
- Manual XZ-Axis Stages
- Manual Z-Axis Stages
- Micrometer Heads & Feed Screws
- Mounting Accessories for CCD Cameras
- Positioning Stage Suction Plates
- Rods, Mounts & Cross Clamps
- Scales for Manual Stages
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy