(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Manual X-Axis Stages - Linear Ball Guide, Stainless Steel, Electroless Nickel Plating, BSS/BSL
Suruga Seiki
A linear ball guide stage (X-axis) that achieves "low profile and high stiffness."
[Features]
・ High accuracy: A stage that has a high degree of movement accuracy and stage parallelism between the over and underside by processing the guide directly on the housing
・ Low profile: Low profile structure with the integrated guide structure
・ Size: BSS series comes in 25 × 25 / 40 × 40 / 50 × 50 / 60 × 60 / 70 × 70 / 80 × 80 mm, and BSL (Long-stroke specification) comes in 40 × 80 / 60 × 120 mm
・ Low price: Achieved cost reduction with the manufacturer's original production method
[A wide range of feed options]
・ For finer positioning: Differential micrometer (minimum reading 0.5 μm), digimatic micrometer (Minimum display: 1 μm)
・ For changing feed pitch and reducing costs: Feed screw, knob (Selectable from P = 0.25/0.5/1.0)
・ For preventing erroneous operations and saving space: Feed screw, hex key (Selectable from P = 0.25/0.5)
[A wide range of clamp options]
・ For reducing the gap when clamping: Disc clamp
・ For improving holding power: Opposing clamp
・ For operating/fixing from one direction: Operating side clamp
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail Feed Screw, XFES
MISUMI
Feed Screw Stages with fine feeding of 0.5mm lead.
Days to Ship: | Same day or more |
---|
Show Stock Products
Manual X-Axis Stages - High Precision X-Axis, Dovetail, Hex Wrench Drive, XEEG
MISUMI
Dovetail Slide Stage with a hex wrench feeding method to save space.*Note that "Load Capacity (Range)(N) is strictly a sorting parameter. For load capacity of your selected stage. Please use "Maximum Load (N)" or the chart in the Data/Specifications tab.
Days to Ship: | Same day or more |
---|
Show Stock Products
Manual X-Axis Stages - High Precision, Linear Ball Guide, XSG
MISUMI
High Precision, High Rigidity, but Low Price. If you don't need measurement, Feed Screw version is even lower in price.
Days to Ship: | 10 Days or more |
---|
Manual X-Axis Stages - High Precision, Linear Ball Guide, Low Profile, XSGL, XSBGL
MISUMI
Low profile, space saving, design with a long stroke.
Days to Ship: | 12 Days or more |
---|
Manual X-Axis Stages - High Precision, Linear Guide, XLSG
MISUMI
Linear Guide Type Long Stroke Stages with high load capacity.
Days to Ship: | 12 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, XEG
MISUMI
Low Cost Dovetail X-Axis Stage of Thinness Min.15mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Manual X-Axis Stages - High Precision, Dovetail, Slim Low Profile, XSSLC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail, Rapid Feed Screw, XFHT
MISUMI
Dovetail Slide Stages with smooth 4.2mm lead feed screw is released now with an economical price.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B11
Suruga Seiki
A light weight, high accuracy cross roller guide type stage.
[Features]
・ The main material is aluminum, so it is lightweight
・ High-accuracy stage with high rigidity, low friction and excellent minute feeding
・ Size, feed position, orientation specifications, feed method can be selected as options
[Applications]
・ Precision adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments
Days to Ship: | 11 Days or more |
---|
Manual X-Axis Stages - Screw Stages
Chuo Precision Industrial
A feed-augur fine-motion X-axis. Uses dovetail grooves for the travel guide.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - High-Grade Aluminum
Chuo Precision Industrial
A lightweight, rigid HG-VDR stage that uses aluminum alloy as its main material.
Days to Ship: | 13 Days or more |
---|
Manual X-Axis Stages - High Precision, Rectangular Dovetail, Standard, XSL
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - High Precision, Rectangular Dovetail, Low Profile, XSLC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - High Precision, Square Dovetail, Standard, XSC
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - High Precision, Dovetail, Slim, XSSL
MISUMI
Dovetail X-Axis Stage with Lead of 4.2mm for Smooth Feeding.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, Tamper Proof Adjustment, XEGCL
MISUMI
Dovetail slide feed screw stage with feed knob clamp for better position holding.
Days to Ship: | 12 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, Screw Replacable Type, XEGL
MISUMI
Feed screw type dovetail stages. The handle can be extended by utilizing the M6 tap.
Days to Ship: | 12 Days or more |
---|
Manual X-Axis Stages - Cross Roller, High Load, Hex Knob, XTOUGH
MISUMI
Steel Cross Roller Stages with high load capacity and high rigidity.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Thin, Replaceable Screw, XSCL
MISUMI
Feed screw type dovetail stages. The handle can be extended by utilizing the M6 tap.
Days to Ship: | 12 Days or more |
---|
Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Tamper Proof Adjustment, XSLCL
MISUMI
Dovetail Slide Stage with position holding performance improved by clamping the feed knob shaft directly.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, Long, Selectable Lead, XLSL
MISUMI
Dovetail Slide Feed Screw stage with selectable screw lead in 2mm, 5mm, 10mm. Long strokes equivalent of Rack & Pinion stages. Also suitable for vertical use.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, Short Lead, B08/BDBXS/BDBXR
Suruga Seiki
A feed screw type dovetail stage (X-axis) with a wide range of sizes and strokes.
[Features]
・ It is composed of a nut and a feed screw on the main body side, and fine adjustment is possible compared to a rack and a pinion
・ The feed method can be selected from the knob type or the hex key operation type
・ The hex key operation type is space-saving and effective in preventing erroneous operation
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Dovetail, Feed Screw, Long Lead, B05
Suruga Seiki
A feed screw long lead type dovetail stage (X-axis).
[Features]
・ It is composed of a nut and a feed screw on the main body side, and fine adjustment is possible compared to a rack and a pinion
・ The clamp adopts a lever type
・ With a vernier scale (0.1 mm)
[Applications]
・ Adjustment of cameras, microscopes, sensors and optical components
・ Positioning of production, assembly and inspection processes related to semiconductors and measuring instruments.
Days to Ship: | 8 Days or more |
---|
Suruga Seiki
A low profile and high rigidity linear ball guide type stage.
[Features]
· High accuracy: A stage that has a high degree of movement accuracy and stage parallelism between the over and underside by processing the guide directly on the housing
・ Low profile: Low profile structure with the integrated guide structure
・ Low price: Achieved cost reduction with the manufacturer's original production method
[A wide range of feed options]
· For finer positioning: Differential micrometer (minimum reading 0.5 μm), digimatic micrometer (Minimum display: 1 μm)
・ For changing feed pitch and reducing costs: Feed screw, knob (Selectable from P = 0.25/0.5/1.0)
・ For preventing erroneous operations and saving space: Feed screw, hex key (Selectable from P = 0.25/0.5)
[A wide range of clamp options]
· For reducing misalignment when clamping: Disc clamp
・ For improving holding power: Opposing clamp
・ For operating/fixing from one direction: Operating side clamp
Days to Ship: | 11 Days or more |
---|
Manual X-Axis Stages - 30X30 Small Rail Stage
Chuo Precision Industrial
X-axis mobile unit handling differing feed methods within a space measuring 30 mm×30 mm.
[Features]
· X-axis mobile unit handling differing feed methods within a space measuring 30 mm × 30 mm.
· The SRS-1 is inexpensive and capable of fine adjustment with the 0.5-mm pitch feed auger.
· The LS-311 employs a rack and pinion feeding method, achieving large distance movements.
· Can be widely used for applications requiring the positioning of cameras, sensors, and other items
Days to Ship: | 26 Days or more |
---|
Manual X-Axis Stages - High-Grade
Chuo Precision Industrial
[Features]
· Stage offering high precision and high rigidity utilizing the HG-VCR method.
· Both the standard and symmetric types can be configured symmetrically.
· Feed screw, standard micro, and fine-pitched micro feeding methods are available.
· Clamp types include plate clamps and operation-side clamps.
· Can be widely used for applications requiring the precise positioning of cameras, sensors, work, and other items.
Days to Ship: | 13 Days or more |
---|
Manual X-Axis Stages - Fixed Position Type, Standard
Chuo Precision Industrial
[Features]
· Clampless stage that stays in place after position adjustment.
· Special mechanism to prevent backlash.
· Use a hex wrench to adjust the position.* Hex wrench not included.
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment instead of requiring constant adjustment.
· Can be installed horizontally, vertically or upside-down.
· Rotary stage has a transmission hole at its center.
Days to Ship: | 8 Days or more |
---|
Manual X-Axis Stages - Fixed Position Type, Low Profile
Chuo Precision Industrial
Similar to a conventional fixed stage, but takes up no more room than a spacer. Especially handy for use in space-constrained situations thanks to its special clamp-free operation.
[Features]
▪ Employs a lock-less mechanism; the stage will not move once set in position
▪ Natural self-locking design prevents backlash
▪ Amazingly thin compared to conventional stages
▪ Position workpieces in no more width than a spacer occupies (8 mm)
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Travel (Range) |
Load Capacity (Range)(N) |
Table Length L (Range)(mm) |
Table Width W (Range)(mm) |
Overall Height (Range)(mm) |
Feeding Method |
Guiding Mechanism |
Table Material |
Table Surface Treatment |
|
|
|
|
|
| ||||||||||||||||||||||||
Brand | Suruga Seiki | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | Chuo Precision Industrial | Chuo Precision Industrial | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Suruga Seiki | Suruga Seiki | Suruga Seiki | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial |
Product Series | Manual X-Axis Stages - Linear Ball Guide, Stainless Steel, Electroless Nickel Plating, BSS/BSL | Manual X-Axis Stages - High Precision X-Axis, Dovetail, Hex Wrench Drive, XEEG | Manual X-Axis Stages - High Precision, Linear Ball Guide, XSG | Manual X-Axis Stages - High Precision, Linear Ball Guide, Low Profile, XSGL, XSBGL | Manual X-Axis Stages - High Precision, Dovetail, Slim Low Profile, XSSLC | Manual X-Axis Stages - Cross Roller Guide, High Accuracy, Lightweight, B11 | Manual X-Axis Stages - High Precision, Rectangular Dovetail, Standard, XSL | Manual X-Axis Stages - High Precision, Rectangular Dovetail, Low Profile, XSLC | Manual X-Axis Stages - High Precision, Square Dovetail, Standard, XSC | Manual X-Axis Stages - Dovetail, Feed Screw, Tamper Proof Adjustment, XEGCL | Manual X-Axis Stages - Dovetail, Feed Screw, Screw Replacable Type, XEGL | Manual X-Axis Stages - Cross Roller, High Load, Hex Knob, XTOUGH | Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Thin, Replaceable Screw, XSCL | Manual X-Axis Stages - Multi-Mount, Dovetail, Feed Screw, Tamper Proof Adjustment, XSLCL | Manual X-Axis Stages - Dovetail, Feed Screw, Long, Selectable Lead, XLSL | Manual X-Axis Stages - Dovetail, Feed Screw, Short Lead, B08/BDBXS/BDBXR | |||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days or more | 12 Days or more | 12 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 13 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 26 Days or more | 13 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||
Travel (Range) | Up to ±10mm / ±10 to 30mm | Up to ±10mm | Up to ±10mm | Up to ±10mm / ±10 to 30mm | ±10 to 30mm | ±30mm or More | Up to ±10mm | ±10 to 30mm | Up to ±10mm / ±10 to 30mm / ±30mm or More | Up to ±10mm | - | - | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | ±10 to 30mm | ±10 to 30mm / ±30mm or More | Up to ±10mm | Up to ±10mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm | ±10 to 30mm / ±30mm or More | ±10 to 30mm / ±30mm or More | Up to ±10mm | Up to ±10mm / ±10 to 30mm | Up to ±10mm / ±10 to 30mm | - | - | - | - |
Load Capacity (Range)(N) | 30.1 to 50 / 50.1 to 100 / 100.1 or More | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 30.1 to 50 / 50.1 to 100 / 100.1 or More | 100.1 or More | 100.1 or More | 5 to 30 / 30.1 to 50 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 | 30.1 to 50 / 50.1 to 100 | 30.1 to 50 | 5 to 30 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 100.1 or More | 5 to 30 | 30.1 to 50 | 5 to 30 | 5 to 30 / 30.1 to 50 | 5 to 30 / 30.1 to 50 | 30.1 to 50 / 50.1 to 100 / 100.1 or More | 5 to 30 | 100.1 or More | 1 to 4.9 / 30.1 to 50 / 50.1 to 100 | 5 to 30 |
Table Length L (Range)(mm) | Up to 25 ~ 91 to 120 | Up to 25 ~ 41 to 60 | Up to 25 ~ 41 to 60 | Up to 25 ~ 91 to 120 | 61 to 90 ~ 91 to 120 | 61 to 90 | Up to 25 ~ 41 to 60 | 41 to 60 | 26 to 40 ~ 61 to 90 | Up to 25 ~ 41 to 60 | 26 to 40 ~ 41 to 60 | 26 to 40 ~ 61 to 90 | 41 to 60 ~ 61 to 90 | 41 to 60 ~ 61 to 90 | 26 to 40 ~ 41 to 60 | 41 to 60 ~ 91 to 120 | Up to 25 ~ 41 to 60 | Up to 25 ~ 41 to 60 | 61 to 90 ~ 121 or More | 26 to 40 ~ 41 to 60 | 41 to 60 ~ 61 to 90 | 26 to 40 | Up to 25 ~ 41 to 60 | 26 to 40 ~ 61 to 90 | Up to 25 ~ 61 to 90 | 26 to 40 | 41 to 60 ~ 61 to 90 | Up to 25 ~ 41 to 60 | 26 to 40 ~ 41 to 60 |
Table Width W (Range)(mm) | Up to 25 ~ 91 to 120 | Up to 25 ~ 41 to 60 | Up to 25 ~ 41 to 60 | Up to 25 ~ 91 to 120 | 26 to 40 ~ 41 to 60 | 61 to 90 | Up to 25 ~ 41 to 60 | Up to 25 | 26 to 40 ~ 41 to 60 | Up to 25 ~ 41 to 60 | Up to 25 | 26 to 40 ~ 61 to 90 | 26 to 40 | 26 to 40 | 26 to 40 ~ 41 to 60 | Up to 25 | Up to 25 ~ 41 to 60 | Up to 25 ~ 41 to 60 | 61 to 90 ~ 121 or More | 26 to 40 ~ 41 to 60 | 26 to 40 | Up to 25 | Up to 25 ~ 41 to 60 | 26 to 40 | Up to 25 ~ 61 to 90 | 26 to 40 | 41 to 60 ~ 61 to 90 | Up to 25 ~ 41 to 60 | 26 to 40 ~ 41 to 60 |
Overall Height (Range)(mm) | 1 to 15 ~ 15.1 to 20 | 1 to 15 ~ 15.1 to 20 | 1 to 15 ~ 20.1 to 25 | 1 to 15 ~ 15.1 to 20 | 15.1 to 20 | 25.1 to 30 | 1 to 15 ~ 15.1 to 20 | 15.1 to 20 | 1 to 15 ~ 15.1 to 20 | 1 to 15 ~ 15.1 to 20 | - | - | 25.1 to 30 | 15.1 to 20 | 15.1 to 20 | 25.1 to 30 | 1 to 15 ~ 15.1 to 20 | 1 to 15 ~ 15.1 to 20 | 35.1 to 40 ~ 40.1 to 50 | 15.1 to 20 | 25.1 to 30 | 20.1 to 25 | 1 to 15 ~ 25.1 to 30 | 25.1 to 30 | 1 to 15 ~ 15.1 to 20 | - | - | - | - |
Feeding Method | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw | Feed Screw |
Guiding Mechanism | Linear Ball | Dovetail Slide | Dovetail Slide | Linear Ball | Linear Ball | Liner Guides | Dovetail Slide | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Cross Roller | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Dovetail Slide | Linear Ball | Linear Ball | Cross Roller | Slide Guide | Slide Guide |
Table Material | Stainless Steel | Aluminum Alloy | Brass | Stainless Steel | Stainless Steel | Aluminum Alloy | Brass | Aluminum Alloy | Aluminum Alloy | Aluminum | Brass | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Brass | Brass | Steel | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum / Brass | Aluminum | Stainless Steel | Aluminum Alloy | Stainless Steel | Aluminum Alloy | Aluminum Alloy |
Table Surface Treatment | Electroless Nickel | Black Anodize | - | Electroless Nickel / Low Temperature Black Chrome | Electroless Nickel | Black Anodize | - | Black Anodize | Black Anodize | Black Anodize | Low Temperature Black Chrome | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Black Anodize | - | - | Electroless Nickel | Black Anodize | Black Anodize | Black Anodize | Black Anodize / Black Oxide | Black Anodize | Low Temperature Black Chrome | Black Anodize | Low Temperature Black Chrome | None / Black Anodize | Black Anodize |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy