(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Contact Switches（Contact Material：Stainless Steel）
| Days to Ship |
|
|---|
-
CS-Touch Switch CS/CSJ/CSS/CSK/CSP
Metrol
[Features]
-Slim design that can be used side by side, abundant variations.
- M5 ~ / long stroke / waterproof.
-High performance.
-Repeatability of 5 μm.
-A precision mechanical type that does not cause mutual interference, enabling stable detection at narrow pitches that could not be achieved with proximity sensors.
-The stylus can be customized according to the detector.
-No need for dogs or mediation actuators required for conventional "proximity sensors" and "microswitches".
[Application]
-For positioning production lines, tables, spot-welded sheet metal, etc.
-For checking the opening and closing of brake pads and detecting the presence or absence of transport work.
- For starting the starting point of the machine.- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
- New Products
Contact Switches - Threaded, Standard
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Mechanical Life (x 10k times): 1000
•Main Body Shape: Screw Type- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Contact Switches - Long Stroke
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches- Wide Contact Angle Type
MISUMI
Since a spherical dome is used, this switch can be contacted from all directions.
- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
Contact Switches - Hall Effect Point Type - 2 Signals
MISUMI
Detectable with Low Contact Force.
- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
CS-touch Switch for Declination, Waterproof Type CSHP
Metrol
A contact switch that is suitable for adverse environments due to its IP67 structure for M8 thin declination.
[Features]
-Repeatability of 5 μm.
-Significantly slimmer from the conventional outer diameter M12 to M8.
-Since a linear bush is used for the bearing, it is suitable for sliding, declination, and offset.
-Highly waterproof structure with IP67, compatible with adverse environments.
[Application]
-For setting the starting origin of machines.-For checking the opening and closing of brake pads.
-For detecting the presence or absence of a conveyed work.
-For positioning sheet metal for spot welding.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Water-Resistant, Threaded, Flanged
MISUMI
•Switch Operating Point Dimension P (mm): 0.25
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 0.8
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Water-Resistant, Threaded, Ball Contact
MISUMI
•Switch Operating Point Dimension P (mm): 0.25
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 0.8
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Waterproof, Threaded
MISUMI
•Switch Operating Point Dimension P (mm): 0.15
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
Detection with low contact force is possible.
- Volume Discount
- Spec Change
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Contact Switches - Spring Plunger
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.8
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 6
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Metrol
[Features]
-Mini switch with a minimum size of Φ8 x 8 mm and a quenching stopper surface.
-Suitable for narrow spaces.
-Effective for downsizing and cost reduction of equipment and devices.
- There are two types, one for straight-ahead hits and the other for declination hits.
-For the waterproof type (IP67), not only the moving parts but also the stopper surface is dustproof inside the rubber boots.
-Since the movable part is a leaf spring and frictionless, galling of the movable part does not occur.
-By embedding directly in the limited mounting space, it is possible to reduce the size of the machine.
-Since the mounting standard dimensional accuracy is good, replacement work is easy.
[Application]
-Ideal for checking the seating of workpieces with a cylinder.
-Ideal for checking the seating of workpieces and jigs.- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Ultra small size high-precision PT-touch switch PT
Metrol
[Features]
-M5 or Φ5, small switch with a minimum length of 17 mm.
- The repeatability (range) of the operating point can be selected from 1 μm / 3 μm.-Although it is a small mechanical type, it demonstrates durability of 3 million times mechanically and electrically.
-Ideal for "precision positioning" and "origin setting" in a limited space.
[Application]
-Ideal for finding the origin of semiconductor inspection tables.
-Convenient for preventing the removal of two thin sheet metals. Convenient for detecting the nozzle height of the dispenser.
-Ideal for checking the opening and closing of brake pads. Convenient for setting the drive origin of the pulse motor.
-Convenient for detecting misalignment of printing machine drums.- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
Metrol
A contact switch with a built-in switch in the stopper bolt.
[Features]
-Stops the work with stopper bolts and outputs a confirmation signal.
-The conventional switch / sensor and dog-Intermediary mechanism are no longer required, making it possible to reduce the size of the machine.
[Application]
-Advance end of the transport device / For checking the reverse end.
-Since the end face is hardened, it also functions as a stopper adjustment of stop position and output of press-fitting signal.- Volume Discount
- CAD ：
- 2D
Days to Ship: Same day or more Show Stock Products
-
- New Products
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: Same day Show Stock Products
-
Contact Switches - Threaded, L-Shaped
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Contact Switches- Tip Shape Selectable Type
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
MISUMI
•Type: Pin Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 5µm or less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - Ball Plunger
MISUMI
•Type: Ball Stroke Type
•Switch Operating Point Dimension P (mm): 0.3
•Repeatability: 0.01mm or Less
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: Same day or more Show Stock Products
-
Contact Switches - with Stopper, Water-Resistant, Threaded
MISUMI
•Switch Operating Point Dimension P (mm): 0.25
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 0.8
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Water-Resistant, Flanged Cylinder
MISUMI
•Switch Operating Point Dimension P (mm): 0.25
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 0.8
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Water-Resistant, Standard
MISUMI
•Switch Operating Point Dimension P (mm): 0.25
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 0.8
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Waterproof, Threaded, Flanged
MISUMI
•Switch Operating Point Dimension P (mm): 0.15
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, Waterproof, Flanged Cylinder
MISUMI
•Switch Operating Point Dimension P (mm): 0.15
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - with Stopper, One-Signal
MISUMI
•Switch Operating Point Dimension P (mm): 0.3～0.4
•Repeatability: 0.01mm or Less
•Contact Force, Push Direction (n): 1
•Contact Point Type: Contact Point Normally Open
•Mechanical Life (x 10k times): 1000- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
Contact Switches - Heat-Resistant, Threaded
MISUMI
A heat-resistant switch with a maximum operating temperature of 200 degrees.
- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
Contact Switches - with Stopper, Heat-Resistant
MISUMI
Heat Resistant Switch of Highest Operating Temperature 200 Degrees Celsius.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - Heat-Resistant, Miniature
MISUMI
Heat Resistant Switch of Highest Operating Temperature 200 Degrees Celsius.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Contact Switches - Heat-Resistant, Ball Plunger
MISUMI
Heat Resistant Switch of Highest Operating Temperature 200 Degrees Celsius.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
MISUMI
Detection with low contact force is possible. In addition, the operating point can be adjusted within the set range.
- Volume Discount
- inCAD Components
Days to Ship: 9 Days or more -
MISUMI
Compact Contact Switches with M5 or ø5 O.D. and minimum total length of 17mm.
- Volume Discount
- inCAD Components
Days to Ship: 8 Days or more -
Non Contact Point Positioning Switches Flat Type
MISUMI
This is a non-contact type positioning switch, flat type. [Main Body Material]Zinc alloy
- Volume Discount
- Spec Change
Days to Ship: 9 Days or more -
CS-touch switch for deflection CSH
Metrol
[Features]
-Repeatability of 5 μm.
-A precision mechanical type that does not cause mutual interference, enabling stable detection at narrow pitches that could not be achieved with proximity sensors.
-Since a linear bush is used for the bearing, it is ideal for sliding, declination, and offset.
[Application]
-For positioning on a production line.
- For starting the starting point of the machine.
-For checking the opening and closing of brake pads.
-For detecting the presence or absence of a conveyed work.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Heat Resistant Switch HT Series
Metrol
[Features]
-Continuous maximum operating temperature 150 ° C / 200 ° C.
-Uses heat-resistant plastic parts, high-temperature adhesive, and heat-resistant cord.
-It is being used one after another for positioning in high temperature environments such as molds and injection molding machines.
[Application]
-For detecting the return of ejector pins of resin molding dies.
-For checking the opening and closing of bubble gates in injection molding machines.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
High Vacuum Degree Class Compatible Type Switch
Metrol
10-5 Pa High vacuum class compatible contact switch.
[Features]
-Positioning switch for high vacuum environment, manufactured only with low-outgas compatible parts.
[Application]
-For detecting the presence or absence of semiconductor wafers in vacuum chambers.
-Glass substrate for vacuum film deposition equipment and photovoltaic (PV) vacuum equipment.
-For positioning the glass substrate of vacuum film deposition equipment for FPDs, detecting tray seating of masks, and finding the origin of carriers.
-Adopted one after another by major semiconductor manufacturing equipment manufacturers- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Type |
| Main Body Shape |
| Contact Section Type |
| Environment |
| Body Material |
| Contact Material |
| Contact Stroke S(mm) |
| Contact Point Type |
| Cylinder Part O.D. D(mm) |
| Mounting Thread Nominal M |
| Switch Operating Point P(mm) |
| Repeatability |
| Contact Part O.D. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Metrol | MISUMI | MISUMI | MISUMI | MISUMI | Metrol | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Metrol | Metrol | Metrol | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Metrol | Metrol | Metrol |
| Product Series | Contact Switches - with Stopper, Water-Resistant, Threaded, Flanged | Contact Switches - with Stopper, Water-Resistant, Threaded, Ball Contact | Contact Switches - with Stopper, Water-Resistant, Flanged Cylinder | Contact Switches - with Stopper, Waterproof, Threaded, Flanged | Contact Switches - with Stopper, Waterproof, Flanged Cylinder | |||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day
Show Stock Products | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||
| Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type / Stopper Type | Ball Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type | Pin Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Ball Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Pin Stroke Type | Pin Stroke Type / Stopper Type | Pin Stroke Type / Stopper Type | Ball Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type | Pin Stroke Type / Anglular Misalignment Tolerant Type | Pin Stroke Type / Ball Stroke Type / Anglular Misalignment Tolerant Type / Stopper Type | Pin Stroke Type |
| Main Body Shape | Screw Type / Cylindrical Shape | Screw Type | Screw Type | Screw Type | Square Shape | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type / Cylindrical Shape / Flanged | Screw Type / Cylindrical Shape | Screw Type / With Hex Head | Cylindrical Shape | Cylindrical Shape | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type | Cylindrical Shape | Cylindrical Shape | Screw Type | Cylindrical Shape | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type | Screw Type / Cylindrical Shape | Square Shape | Screw Type | Screw Type | Screw Type |
| Contact Section Type | Flat Type / Needle Type | Needle Type | Needle Type | Dome | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | - | Needle Type | - | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Needle Type | Dome | Needle Type | Needle Type |
| Environment | Standard / Waterproof | Standard | Standard | Standard | Standard | Waterproof | Drip-Proof | Drip-Proof | Waterproof | Standard | Standard | Drip-Proof / Waterproof | Standard / Waterproof | Standard / Waterproof | Standard | Standard | Standard | Standard | Waterproof | Standard | Drip-Proof | Drip-Proof | Drip-Proof | Waterproof | Waterproof | Standard | Heat Resistant | Heat Resistant | Heat Resistant | Heat Resistant | Standard | Standard / Waterproof | Standard | Standard | Heat Resistant | Vacuum |
| Body Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Zinc Alloy | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Zinc Alloy | Stainless Steel | Stainless Steel | Stainless Steel |
| Contact Material | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel |
| Contact Stroke S(mm) | 2 ～ 5 | 2.8 | 5 | 2.8 | 3 | 2.8 | 0.5 | 0.5 | 0.3 | 1.2 ～ 3 | 3 | 0.3 ～ 0.5 | 1.5 | 0.7 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 0.8 | 0.5 | 0.5 | 0.5 | 0.3 | 0.3 | 2.5 | 2.8 | 0.7 | 0.3 | 0.8 | 6 | 1.5 | 3 | 2.8 | 0.3 ～ 2.8 | 1.5 |
| Contact Point Type | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | No Contact Point, NPN Open Collector | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | No Contact Point, NPN Open Collector | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | Contact Point Normally Open | No Contact Point, NPN Open Collector | Contact Point Normally Closed | No Contact Point, NPN Open Collector | Contact Point Normally Open / Contact Point Normally Closed | Contact Point Normally Open | Contact Point Normally Open / Contact Point Normally Closed |
| Cylinder Part O.D. D(mm) | 5 ～ 8 | - | - | - | - | - | - | - | - | - | - | 8 | 5 | - | 6 ～ 8 | 6 | - | - | - | - | - | 8 | 8 | - | 8 | - | - | - | - | - | - | 5 | - | - | - | - |
| Mounting Thread Nominal M | M5x0.5 (Fine) / M6x0.75 (Fine) / M6x0.5 (Fine) / M8x0.75 (Fine) | M5x0.5 (Fine) / M6x0.75 (Fine) | M8x0.75 (Fine) | M12x1.0 (Fine) | - | M8 x 0.5 (Fine) | M10x1.5 (Coarse) | M10x0.75 (Fine) | M10x0.75 (Fine) | M6x0.5 (Fine) / M8x0.75 (Fine) | M6x1.0 (Coarse) / M8x1.25 (Coarse) | M10x1.5 (Coarse) / M10x0.75 (Fine) | M5x0.5 (Fine) | M6x1.0 (Coarse) / M8x1.25 (Coarse) / M10x1.5 (Coarse) | - | - | M6x0.75 (Fine) / M8x0.75 (Fine) | M6x0.75 (Fine) | M8x0.75 (Fine) | M6x1.0 (Coarse) | M10x0.75 (Fine) | - | - | M10x1.5 (Coarse) | - | M6x1.0 (Coarse) | M6x0.75 (Fine) | M6x1.0 (Coarse) | M10x0.75 (Fine) | M6x1.0 (Coarse) | M14x0.5 (Fine) | M5x0.5 (Fine) | - | M12x1.0 (Fine) | M6x1.0 (Coarse) / M6x0.75 (Fine) / M10x0.75 (Fine) | M5x0.5 (Fine) |
| Switch Operating Point P(mm) | 0.3 | 0.3 | 0.3 | 0.3 | 0.5 | 0.3 | 0.25 | 0.25 | 0.15 | 0.5 | 0.8 | 0.15 ～ 0.25 | 0 ～ 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.25 | 0.25 | 0.25 | 0.15 | 0.15 | 0.3～0.4 | 0.3 | 0.35 | 0.15 | 0.3 | 2.25 | 0 | 0.5 | 0.3 | 0.15 ～ 0.5 | 0 ～ 0.3 |
| Repeatability | 5µm or less | 5µm or less | 5µm or less | 5µm or less | 0.02mm or Less | 5µm or less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.02mm or Less | 0.01mm or Less | 0.01mm or Less | 3µm or less / 1µm or less | 0.01mm or Less | 5µm or less | 5µm or less | 5µm or less | 5µm or less | 5µm or less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.01mm or Less | 0.02mm or Less | 3µm or less | 0.02mm or Less | 5µm or less | 0.01mm or Less | 3µm or less |
| Contact Part O.D. | Up to φ2 / Up to φ4 | Up to φ2 | Up to φ4 | Up to φ10 | Up to φ4 | - | Up to φ4 | Up to φ4 | Up to φ2 | Up to φ2 / Up to φ4 | Up to φ4 | Up to φ2 / Up to φ4 | Up to φ2 | - | Up to φ2 / Up to φ4 | Up to φ2 | Up to φ2 / Up to φ4 | Up to φ2 / Up to φ4 | Up to φ4 | Up to φ4 | Up to φ4 | Up to φ4 | Up to φ4 | Up to φ2 | Up to φ2 | Up to φ2 | Up to φ2 | Up to φ2 | - | Up to φ4 | Up to φ4 | Up to φ2 | Up to φ4 | Up to φ10 | Up to φ2 / Up to φ4 | Up to φ2 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Type
-
Main Body Shape
-
Contact Section Type
- Flat Type
- Needle Type
- Dome
-
Environment
- Standard
- Drip-Proof
- Waterproof
- Heat Resistant
- Vacuum
-
Body Material
- Stainless Steel
- Aluminum
- Zinc Alloy
- BsBM Ni Plated
-
Contact Material
- Stainless Steel
- Polyacetal
- Carbide
-
Metric / Inch
- metric
-
Contact Stroke S(mm)
-
Contact Point Type
- Contact Point Normally Open
- Contact Point Normally Closed
- No Contact Point, NPN Open Collector
-
Cylinder Part O.D. D(mm)
-
Mounting Thread Nominal M
-
Switch Operating Point P(mm)
-
Repeatability
-
Contact Part O.D.
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy