Standard Linear Guides

• 

  LM Guides - Miniature, SRS model assembly.

  THK

  A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
  * When ordering matched rail types, please input a multiple of the number of required rail types as your order quantity.
  (Example) required rails: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required rails: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  LM Guides - Block Only, Model HSR.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide HSR series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  LM Guides - Block Only, Model SHS.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide SHS series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Caged ball design provided high-speed rotation, a low noise level, and extended service life.
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• • New Products

  

  Miniature Linear Guides - Standard block, available with constant lubrication unit.

  MISUMI

  Miniature stainless steel linear guides with standard block. It is one of the most used models in different applications. Configurable preload and precision. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Linear Guides - For medium/heavy load made of stainless steel.

  MISUMI

  Stainless steel linear guides with the option to select standard block, short standard or wide blocks. With selectable lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  LM Guides - Block Only, Model SSR.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide SSR series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Caged ball design provided high-speed rotation, a low noise level, and extended service life.
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Miniature Linear Guides - With standard block, long.

  MISUMI

  Miniature stainless steel linear guides with longer length standard block, designed to withstand higher loads and moments. Configurable preload and precision. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.

  • Spec Expansion

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Ultra Heavy Load Linear Guides - Standard/Wide block.

  MISUMI

  Linear guide for ultra heavy load. Precision standard grade, with light preload. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Linear Guides - For heavy load.

  MISUMI

  Linear guides of more robust sizes ideal for heavy loads, with the option to select them with standard block or wide blocks. Selectable precision and type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  LM Guides - Block Only, SR Model.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide SR series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Miniature Linear Guides - Short block.

  MISUMI

  Miniature stainless steel linear guides with short block. 20% more compact than the standard block. Selectable precision, preload and type of lubricant. Blocks and rails cannot be purchased separately.

  • Lead Time Reduction

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature LM Guides - SRS Model Assembly.

  THK

  A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
  * When ordering matched rail types, please input a multiple of the number of required rail types as your order quantity.
  (Example) required rails: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required rails: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	7 Days or more

• 

  Miniature Linear Guides - With standard block, wide track.

  MISUMI

  Wide and low profile stainless steel miniature linear guides. Its design allows it to have a higher load and allowable moments. Preload, precision and type of lubricant selectable. Blocks and rails cannot be purchased separately.

  • Spec Expansion

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  LM Guides - Standard guide, SHS model assembly.

  THK

  A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
  * When ordering matched rail types, please input a multiple of the number of required rail types as your order quantity.
  (Example) required rails: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required rails: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  Days to Ship:	7 Days

• 

  Heavy Load Linear Guides - Standard/Wide Block.

  MISUMI

  Linear guide for heavy load. Precision standard grade, with light preload. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  LM Guides - Block Only, Model SHW.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide SHW series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Caged ball design provided high-speed rotation, a low noise level, and extended service life.
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Miniature Linear Guides - Standard block with holes for dowel bolts.

  MISUMI

  Stainless Steel Miniature Linear Guides with standard block that adds holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable precision, preload and type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Linear Guides - For medium load.

  MISUMI

  Linear guides of the most used sizes in the industry, focused on their use with medium loads. With the option to select them with standard block or wide blocks. Selectable precision and type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Linear Guides - Rail only, 400 series, Thomson brand.

  Thomson Linear

  •Set/Separate Item : Rail Only
  •Rail Type : Standard
  For complete product overview and details on Linear Guide (Rail Only) - Rail for 411/413, Accuracy and Preload Selectable, Interchangeable (Thomson Linear) see the sections below:

  CAD ：

  3D

  Days to Ship:	Quote

• 

  LM Guides - SSR Model Assembly.

  THK

  Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
  *When ordering matched rail types, input multiples of the number of required rails as the order quantity.
  (Example) required rails: 2(-II)⇒ Order quantity: "2, 4, 6..."
  Required rails: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
  Please place your orders in this manner.

  CAD ：

  2D / 3D

  Days to Ship:	7 Days

• 

  Miniature Linear Guides - Wide rail, wide and long block.

  MISUMI

  Wide and low profile stainless steel miniature linear guides. Its design allows it to have a higher load and allowable moments. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature Linear Guides - With standard long block, wide rail.

  MISUMI

  Miniature linear guides with a longer block design than standard. on a wide and low profile. Available only in stainless steel. Its design allows it to have a higher load and allowable moments than the standard model. Preload, precision and type of lubricant selectable. Blocks and rails cannot be purchased separately.

  • Spec Expansion

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  LM Guides - Rail only, model SHS.

  THK

  MISUMI can custom cut rail to units of 1 mm with symmetric or non-symmetric G dimensions.

  CAD ：

  2D

  Days to Ship:	6 Days

• 

  Miniature Linear Guides - Short block with holes for dowel bolts.

  MISUMI

  Stainless Steel Miniature Linear Guides with Short Block add holes for Dowel Bolts, which reduce assembly time with other equipment and improve position repeatability. It is 20% more compact than the standard block. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature Linear Guides - Wide Track, Long Standard Block with Dowel Bolt Holes.

  MISUMI

  Wide and low profile stainless steel miniature linear guides. At the same time the design of the long block allows it to have a higher load and allowable moments. The block adds holes for dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  LM Guides - Low and wide profile, assembly model SHW.

  THK

  A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
  
  [Features]
  · A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
  · The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
  · Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
  · The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
  · The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  LM Guides - Miniature, model SRS-G assembly.

  THK

  An uncaged, full-ball style ball retainer on the SRS type.
  
  [Features]
  · The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single rail at locations that have limited space requirements and locations that use moment.
  · The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
  · The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
  · The LM block and LM rail both use stainless steel that are highly rust-proof.
  · The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
  · This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

  CAD ：

  2D / 3D

  Days to Ship:	22 Days or more

• 

  LM Guides - Block only, model HRW.

  THK

  MISUMI stocks Individual linear motion guide blocks from the THK LM guide HRW series for quick and easy interchangeability, ensuring problem free maintenance and short down times.
  
  [Features]
  •Balls travel in four precision-ground raceways on an LM rail through the LM block, and endplates incorporated in the LM block.
  •Each row of balls is placed at a contact angle of 45°so that the rated loads applied to the LM block are uniform in all four directions (radial, reverse-radial and lateral directions) for a constant low friction coefficient, and increased rigidity.
  •Blocks self-adjust enabling mounting error to be absorbed, even under a preload, for highly accurate, smooth linear motion.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Miniature Linear Guides - Wide track, standard block with dowel bolt holes.

  MISUMI

  Wide and low profile stainless steel miniature linear guides. Its design allows it to have a higher load and allowable moments. The block adds holes for dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Linear Guides - Block only, standard, 400 series, Thomson brand.

  Thomson Linear

  •Block Type : Long, Short, Standard
  •Set/Separate Item : Block Only
  •Rail Type : Standard
  For complete product overview and details on Short/Standard/Long Block Linear Guide (Block Only) - Low Height, Accuracy and Preload Selectable, Interchangeable, 411/413 Series (Thomson Linear) see the sections below:

  CAD ：

  3D

  Days to Ship:	Quote

• 

  Medium Load Linear Guides - Standard/Wide short block.

  MISUMI

  Linear guide for medium load with shorter blocks to save space. Precision standard grade, with light preload. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Miniature Linear Guides - Long block, low clearance.

  MISUMI

  Miniature stainless steel linear guides with long block. Its length gives it a greater allowable moment load. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature Linear Guides - Wide block.

  MISUMI

  Miniature stainless steel linear guides with wide block. Selectable preload, precision and lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature Linear Guides - Resistant to high temperatures.

  MISUMI

  Standard block stainless steel miniature linear guides. Designed with high temperature resistance parts and grease, applicable for environment up to 150°C. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  LM Guides - SR Model Assembly.

  THK

  A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).
  
  [Features]
  · Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
  · The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
  · Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
  · A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
  · This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two rails, which is capable of highly precise and smooth movements.
  · The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
  · It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
  · LM block, LM rail, and LM rail are all compatible with stainless steel.

  CAD ：

  2D / 3D

  Days to Ship:	7 Days or more

• 

  Linear Guides - Low temp black chrome plated, standard/wide Block.

  MISUMI

  Linear guides of various types and sizes that add a low-temperature black chrome plating, which provides longer lasting corrosion protection. The typical applications of these Linear Guides are in the food and medical industries and in the assembly of electronics and semiconductors.

  CAD ：

  2D / 3D

  Days to Ship:	15 Days or more

• 

  Miniature Linear Guides - Wide Track, Long Standard Block. With a slight slack.

  MISUMI

  Wide and low profile stainless steel miniature linear guides. At the same time the design of the long block allows it to have a higher load and allowable moments. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Linear Guides - For heavy load, with dust protection seals or metal scrapers.

  MISUMI

  Linear guides of more robust sizes ideal for heavy loads, with the option of selecting them with standard block, or wide blocks. Configurable with seals for dust protection or with metal scrapers for solid bodies on the rail. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  LM Guides - Rail only, model HSR.

  THK

  MISUMI can custom cut rail to units of 1 mm with symmetric or non-symmetric G dimensions. Cut-to-order, rail only orders.

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  Miniature Linear Guides - Extra long block.

  MISUMI

  Miniature stainless steel linear guides with extra long block. Its length gives it a greater load and allowable moments. Selectable preload, precision and lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Linear Guides - For medium load, with dust protection seals or metal scrapers.

  MISUMI

  Linear guides for medium load with the option to select standard block, short standard or wide blocks. Configurable with seals for dust protection or with metal scrapers for solid bodies on the rail. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Medium Load Linear Guides - Short block, stainless steel.

  MISUMI

  Stainless steel linear guide for medium load. Standard degree of precision. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Heavy Load Linear Guides - Standard block, stainless steel. Interchangeable.

  MISUMI

  Heavy duty stainless steel linear guide. Standard degree of precision. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

  • Volume Discount

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	10 Days or more

• 

  Miniature Linear Guides - Long block, with holes for dowel bolts.

  MISUMI

  Miniature stainless steel linear guides with long block. Its length gives it a greater allowable moment load. Adds holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

• 

  Miniature Linear Guides - Long and wide block.

  MISUMI

  Stainless steel miniature linear guides with long and wide block. Designed to withstand higher loads and moments. Selectable type of lubricant. Blocks and rails cannot be purchased separately.

  • inCAD Components

  CAD ：

  2D / 3D

  Days to Ship:	12 Days or more

Loading...