(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Linear Guides - For medium load, with holes for dowel bolts.
MISUMI
Linear guides of the most used sizes in the industry, focused on their use with medium loads. With the option of selecting them with a standard or short standard block. The blocks add holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.
Days to Ship: | 12 Days or more |
---|
LM Guides - SSR Model Assembly.
THK
Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering matched rail types, input multiples of the number of required rails as the order quantity.
(Example) required rails: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required rails: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.
Days to Ship: | 7 Days |
---|
LM Guides - Low and wide profile, assembly model SHW.
THK
A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.
[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.
Days to Ship: | 8 Days or more |
---|
LM Guides - For high temperature, model SR-M1 assembly.
THK
High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.
Days to Ship: | 38 Days or more |
---|
LM Guides - Low and wide profile, assembly model HRW.
THK
A structure with a wide rail width and low center of gravity. It is advantageous when there are Mc moment requirements and is thin compared with HSR.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single rail.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
Days to Ship: | 7 Days or more |
---|
LM Guides - Rail only, SR model.
THK
MISUMI can custom cut rail to units of 1 mm with symmetric or non-symmetric G dimensions. Cut-to-order.
Days to Ship: | 6 Days or more |
---|
Ultra Heavy Load Linear Guides - Standard block, stainless steel. Interchangeable.
MISUMI
Stainless steel linear guide for extra heavy load. Standard degree of precision. It has resin retainers without mutual contact between its bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.
Days to Ship: | 10 Days or more |
---|
Miniature Linear Guides - Long block, with holes for dowel bolts.
MISUMI
Miniature stainless steel linear guides with long block. Its length gives it a greater allowable moment load. Adds holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable type of lubricant. Blocks and rails cannot be purchased separately.
Days to Ship: | 12 Days or more |
---|
Linear Guides - For heavy load, with dust protection seals or metal scrapers.
MISUMI
Linear guides of more robust sizes ideal for heavy loads, with the option of selecting them with standard block, or wide blocks. Configurable with seals for dust protection or with metal scrapers for solid bodies on the rail. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.
Days to Ship: | 12 Days or more |
---|
LM Guides - For high temperature, model HSR-M1 assembly.
THK
Designed for high temperature environments up to 150°C. Has a low rolling resistance fluctuation in response to changes in temperature and has been treated to ensure excellent dimension consistency.
Features
·Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
·Each rail row is positioned at a 45° contact angle ensuring the rated load will be the same in all four directions (radial, reverse radial, and horizontal directions) that act on the LM block, allowing for use from any position.
·The LM block, LM rail, and balls all use a stainless steel with excellent corrosion resistance, ideal for use in clean rooms.
·Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.
Days to Ship: | 87 Days or more |
---|
LM Guides - Rail only, SSR model.
THK
Rail for SSR guides. It can be purchased individually, with a configurable length in units of 1mm.
Days to Ship: | 10 Days or more |
---|
LM Guides - Rail only, model HRW.
THK
MISUMI can custom cut rail to units of 1 mm with symmetric or non-symmetric G dimensions. Cut-to-order, rail only orders.
Days to Ship: | 6 Days or more |
---|
LM Guides - Rail only, model SHW.
THK
MISUMI can custom cut rail to units of 1 mm with symmetric or non-symmetric G dimensions. Cut-to-order.
Days to Ship: | 6 Days |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Set / Single Item |
Block Type |
Rail Type |
Rail Width(mm) |
Mounting Height H(mm) |
No. of Blocks |
Material |
Rail Length L(mm) |
Preload |
Accuracy |
Nominal Part Number |
Ball Arrangement |
Retainer |
Block Mounting Hole Pitch (Width Direction)(mm) |
Block Mounting Hole Pitch (Length Direction)(mm) |
Block Mounting Hole Diameter |
Rail Mounting Hole Pitch(mm) |
Rail Mounting Hole Diameter |
Brand | MISUMI | THK | THK | THK | THK | THK | MISUMI | MISUMI | MISUMI | THK | THK | THK | THK |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Linear Guides - For medium load, with holes for dowel bolts. | Ultra Heavy Load Linear Guides - Standard block, stainless steel. Interchangeable. | Miniature Linear Guides - Long block, with holes for dowel bolts. | Linear Guides - For heavy load, with dust protection seals or metal scrapers. | |||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship | 12 Days or more | 7 Days | 8 Days or more | 38 Days or more | 7 Days or more | 6 Days or more | 10 Days or more | 12 Days or more | 12 Days or more | 87 Days or more | 10 Days or more | 6 Days or more | 6 Days |
Specifications |
|
|
|
| |||||||||
Set / Single Item | Set | Set | Set | Set | Set | Rail Only | Set / Block Only / Rail Only | Set | Set | Set | Rail Only | Rail Only | Rail Only |
Block Type | Standard | Standard / Short / Wide | Standard / Wide | Standard / Wide / Wide Short | Standard / Wide | - | Standard | Long | Standard / Wide | Wide / Wide Long | - | - | - |
Rail Type | Standard | Standard | Wide | Standard | Wide | Standard | Standard | Standard | Standard | Standard | Standard | Wide | Wide |
Rail Width(mm) | 15 ~ 23 | 15 ~ 34 | 37 ~ 69 | 15 ~ 34 | 33 ~ 69 | 15 ~ 34 | 20 ~ 23 | 7 ~ 20 | 15 ~ 23 | 15 ~ 20 | 15 ~ 34 | 33 ~ 69 | 37 ~ 69 |
Mounting Height H(mm) | 24 ~ 33 | 24 ~ 48 | 21 ~ 35 | 24 ~ 48 | 17 ~ 35 | 24 ~ 48 | 30 ~ 40 | 8 ~ 20 | 24 ~ 33 | 24 ~ 30 | 24 ~ 48 | 17 ~ 35 | 21 ~ 35 |
No. of Blocks | 1 / 2 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | - | 1 / 2 | 1 / 2 | 1 / 2 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | - | - | - |
Material | Carbon Steel | Carbon Steel | Carbon Steel | Stainless Steel | Carbon Steel / Stainless Steel | - | Stainless Steel | Stainless Steel | Carbon Steel | Stainless Steel | - | - | Carbon Steel |
Rail Length L(mm) | 100 ~ 1960 | - | 108 ~ 3000 | - | 72 ~ 1000 | 68 ~ 3000 | 220 ~ 1480 | 40 ~ 700 | 160 ~ 1960 | - | 61 ~ 3000 | 60 ~ 3000 | 70 ~ 3000 |
Preload | Clearance | - | Standard / Light Preload / Medium Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload | - | Light Preload | Light Preload | Clearance | Standard / Light Preload / Medium Preload | Standard | - | Standard |
Accuracy | Standard Grade | - | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | - | High Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade | Standard Grade |
Nominal Part Number | 15 ~ 25 | 15 ~ 35 | 21 ~ 35 | 15 ~ 35 | 17 ~ 35 | 15 ~ 35 | 20 ~ 30 | 7 ~ 20 | 15 ~ 25 | 15 ~ 20 | 15 ~ 35 | 17 ~ 35 | 21 ~ 35 |
Ball Arrangement | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | - | 4-Row, Gothic | Standard | 4-Row, Circular | 4-Row, Circular | - | - | - |
Retainer | N/A | Available | Available | N/A | N/A | - | Available | N/A | N/A | N/A | - | - | - |
Block Mounting Hole Pitch (Width Direction)(mm) | - | - | 107 | 26 ~ 82 | 60 | - | - | - | - | 38 ~ 53 | - | - | - |
Block Mounting Hole Pitch (Length Direction)(mm) | - | - | 60 | 26 ~ 50 | 29 | - | - | - | - | 30 ~ 40 | - | - | - |
Block Mounting Hole Diameter | - | - | 8 | 4 ~ 9 | 4.4 | - | - | - | - | 4.5 ~ 6 | - | - | - |
Rail Mounting Hole Pitch(mm) | - | - | 80 | 60 ~ 80 | 50 | 60 ~ 80 | - | - | - | 60 | 60 ~ 80 | - | - |
Rail Mounting Hole Diameter | - | - | 7 | 3.5 ~ 9 | 4.5 | 3.5 ~ 9 | - | - | - | 4.5 | 4.5 ~ 9 | - | - |
Loading...
[26-3999/1mm Unit(s)]
See the accuracy standard of each manufacturer.
See the accuracy standard of each manufacturer.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy