(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
YAMAWA Screw Hole Related Tools（Bore Model：For Blind Holes）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Forming Taps - Torqueless Thread Forming, Short Chamfer, SC-TL-RZ
YAMAWA
The number of chamfer threads is just 1, creating a roll tap with specially shaped threading parts for achieving low torque use.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)
YAMAWA
A spiral tap suitable for medium- to high-speed machining with machining centers, etc.
[Features]
· Optimal design of the threads allow burdens of machining on each biting blade to be reduced, resulting reduction of machining torque as well as enhancement of wear resistance.
[Applications]
· Can be machined at 10 to 15 m/min using a machining center (fully-synchronized feeding recommended).- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Titanium Alloys, ZET-B
YAMAWA
A tap for processing high strength, lightweight, and heat-resistant titanium alloys, where the main component is titanium.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Deep Hole Machining, SU-S-SP
YAMAWA
[Features]
· For blind hole processing in materials with high hardening properties and extreme viscosity such as stainless steel, chrome steel and molybdenum steel.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series
YAMAWA
Both mist and dry processing are possible, and a center through hole form has been adopted that can be used for internally lubricated machining. Also suitable for horizontal/vertical machining of blind holes in materials such as carbon steel and alloy steel.
- Volume Discount
Days to Ship: 10 Days or more -
Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series
YAMAWA
Ultra-high speed machining is possible and a center-through hole shape is adopted to support internal lubrication machining. Also suitable for horizontal machining of blind holes in materials such as carbon steel and alloy steel.
- Volume Discount
Days to Ship: 10 Days or more -
Spiral Flute Taps - For Aluminum, AL+SP/AL-SP
YAMAWA
A tap that enables high speed, stable machining of light alloys such as aluminum die casting or forged aluminum.
[Features]
· Optimal blade design limits the internal diameter burrs that tend to appear when cutting threads into light alloy.
· Stable, clean thread machining can be performed.
[Applications]
· Stable thread machining of light alloy such as aluminum die casting or forged aluminum at high speed.
· Can be used not only with aluminum, but also other materials such as brass, bronze, magnesium castings, and zinc alloy castings.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, SU+SP/SU-SP
YAMAWA
Spiral tap for blind hole machining with extremely viscous or work-hardened work material.
[Features]
· For blind hole machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.
· Optimal design of the screw part reduces the machining burden on each blade bite, reducing the cutting resistance and increasing tool life.
· Stable scrap is ejected and a good finish is realized.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
Optimal for machining extremely viscous or work-hardened work material.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiN Coated, R+V/R-V
YAMAWA
A coating roll tap suitable for threading steel and nonferrous materials.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Nickel Base Alloys, ZEN-B
YAMAWA
A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Performance, TiCN Coated, HP+ RZ/HP-RZ
YAMAWA
It is suitable for processing steel materials (35 HRC or less) and light alloys, and can support high-speed machining (20-50 m/min)
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Through Hole/Blind Hole Use
YAMAWA
Hand tap used for general tapping work.
[Features]
· High blade tip strength makes it suitable for work materials that are easily worn.
· More suitable for manual work compared to taps of other shapes.
· 2 types are available, with 5P or 1.5P biting threads.
· When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
· Machining with mechanical machinery is also possible.
· Has straight grooves out of consideration for scrap stow.
[Applications]
· Optimal for threading SPC/SPH and other thin steel plates or SS400/S20 or below mild steel.- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - for Left Hand Threads, HT(LH)
YAMAWA
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Plus Series, TiN Coated, AU+ SP
YAMAWA
Coated spiral tap that can machine at medium to high speed for a wide range of work materials.
[Features]
· A special shape (BLF shape) is adopted for the thread component. Several threads are totally left untouched while the remaining half of the threads are chamfered.
· Completely threaded to prevent the blade from chipping.
· Reduction of friction resistance and tapping torque.
· Maintains screw guidance (stable machining).
· Maintains excellent chip discharge performance (smooth discharge).
[Applications]
· Supports machining of a wide range of work materials such as alloy steel, high carbon steel, medium carbon steel, low carbon steel, etc.
· Ideal for water soluble cutting fluids.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP)
YAMAWA
N-SP(LH) is available as long as it lasts. SP(LH) takes the place of N-SP(LH).
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V)
YAMAWA
LS-N-SP-V is available as long as it lasts. LS-SP-V takes the place of LS-N-SP-V.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT
YAMAWA
For standard pipe taps, it is used when the protruding length of the screw is insufficient.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Cemented Carbide, TiAlN Coated, EH-CT
YAMAWA
Ideal for tapping of high-hardness steel of 45 to 55 HRC, such as steel for hot-rolled dies (SKS3, SKD11, etc.). We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for High Carbon Steels, HC+SP/HC-SP
YAMAWA
It is suitable for tapping high carbon steel such as S55C.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX
YAMAWA
It is suitable for tapping high carbon steel such as S55C. Has undergone oxidation treatment.
- Volume Discount
Days to Ship: 10 Days or more -
Spiral Flute Taps - Deep Hole Machining, Oxidized, S-SP
YAMAWA
Spiral tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Low frictional resistance and good supply of cutting oil are effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, for Cast Iron, N-CT FC
YAMAWA
A carbide tap suitable for thread machining of hard and brittle material such as cast iron.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Carbide, TiAlN Coated, UH-CT
YAMAWA
[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for Soft Steels, Oxidized, E-SP
YAMAWA
A revolutionary spiral tap that has completely eliminated the female screw enlargement problems typical of spiral taps, especially in tapping of mild steel (SS41, S25C, etc.).
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP
YAMAWA
Ideal for pilot hole drilling of difficult-to-cut stainless steel such as SUS316 and SUS317.
- Volume Discount
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA | YAMAWA |
| Product Series | Forming Taps - Torqueless Thread Forming, Short Chamfer, SC-TL-RZ | Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP) | Spiral Flute Taps - Dry Tapping, Blind Hole Machining, HDISP Series | Spiral Flute Taps - Ultra Fast Tapping, Horizontal Use, HFISP Series | Spiral Flute Taps - High Speed Steel, Long Shank, LS-SP (LS-N-SP) | Spiral Flute Taps - TiN Coated, Long Shank, LS-SP-V (LS-N-SP-V) | Taper Pipe Taps - High Speed Steel, Long Shank, Long Screw, LS-PT | Spiral Flute Taps - for High Carbon Steels, Oxidized, HC+SP-OX/HC-SP-OX | Spiral Flute Taps - for Tough Stainless Steels, Oxidized, SU2-SP | ||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
| Thread Types | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Unified | Unified | Meter | Meter | Meter | Meter | Pipe Taper | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Thread Size (Nominal) | M2 ～ M6 | M2 ～ M6 | M3 ～ M16 | M3 ～ M14 | M10 ～ M14 | M10 ～ M14 | M3 ～ M4 | No.10-32UNF ～ M30 | M1.2 ～ M6 | M3 ～ M12 | No.2-56UNC ～ M10 | No.10-24UNC | M2.5 ～ M8 | M2 ～ M12 | M16 | M3 | 1/4-19 | M5 | M3 ～ M10 | M3 ～ M12 | M2 ～ M30 | M3 ～ M5 | M2 ～ M20 | M4 ～ M10 | M3 ～ M16 |
| Pitch (P), Thread Count(mm) | 0.4 ～ 1 | 0.4 ～ 1 | 0.5 ～ 2 | 0.5 ～ 2 | 1.25 ～ 1.5 | 1.25 ～ 1.5 | 0.5 ～ 0.7 | 0.4 ～ 3.5 | 0.25 ～ 1 | 0.5 ～ 1.75 | 0.25 ～ 1.5 | - | 0.45 ～ 0.75 | 0.4 ～ 1.75 | 2 | 0.5 | - | 0.8 | 0.5 ～ 1.5 | 0.5 ～ 1.75 | 0.4 ～ 3.5 | 0.5 ～ 0.8 | 0.4 ～ 2.5 | 0.7 ～ 1.5 | 0.5 ～ 2 |
| Number of Chamfered Threads (Lcf) | 1P | 2.5P | 3P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2P ～ 4P | 3P | 2P ～ 4P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P | 5P | 2.5P | 2.5P | 2.5P | 1.5P | 5P | 2.5P | 3P |
| Tool Material Type | Powdered High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel |
| Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Heat-Treated Steel (45 - 55 HRC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] | Heat-Treated Steel (45 - 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] | High-Hardness Steel (50 - 60 HRC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] |
| Tap Model | Rolled Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Rolled Tap | Spiral Tap | Rolled Tap | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Pipe Tap | Point Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point Tap | Spiral Tap | Spiral Tap |
| Bore Model | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes |
| Coating Presence | Included | None | None | None | Included | Included | None | None | Included | None | Included | None | None | Included | None | None | None | Included | None | None | None | None | Included | None | None |
| Coating Type | TiCN | - | - | - | TiCN | TiCN | - | - | TiN | - | TiCN | - | - | TiN | - | - | - | TiAlN | - | - | - | - | TiAlN | - | - |
| Overall Length (L)(mm) | 42 ～ 62 | 42 ～ 62 | 46 ～ 95 | 46 ～ 88 | 75 ～ 88 | 75 ～ 88 | 46 ～ 52 | 42 ～ 135 | 36 ～ 62 | 46 ～ 82 | 36 ～ 75 | 60 | 46 ～ 70 | 42 ～ 82 | 150 | 100 | 150 | 60 | 46 ～ 75 | 46 ～ 82 | 42 ～ 135 | 46 ～ 60 | 40 ～ 105 | 52 ～ 75 | 46 ～ 95 |
Loading...
Configure
Specification/Dimensions
-
Thread Types
- Meter
- Unified
- Wit
- Perforation
- Pipe Taper
- Pipe Parallel
- Miniature
- Others
-
Metric / Inch
- metric
-
Thread Size (Nominal)
- CTG-22
- CTG-16
- No0UN
- S0.1
- No.10-32UNF
- No.10-24UNC
- S0.2
- No.2-56UNC
- S0.3
- S0.4
- No.4-40UNC
- S0.5
- No.5-40UNC
- No.6
- S0.6
- No.6-32UNC
- S0.7
- S0.8
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- R1
- S1
- W1
- 1-8UNC
- 1'-8UNC
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- R1/4
- Rc1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- R1/8
- Rc1/8
- SM1/8
- W1/8
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- M1.1
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- NPS2
- NPT2
- No2UN
- R2
- W2
- 2-8UN
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- No3UN
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- W3/4
- 3/4-16UNF
- 3/4-10UNC
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- R3/8
- Rc3/8
- W3/8
- 3/8-24UNF
- 3/8-16UNC
- 3/8W16
- M3～10
- SM3/16
- W3/16
- SM3/32
- M3.5
- M4
- No4UN
- №4-40UNC
- M4～6
- M4.5
- M5
- No5UN
- №5-40UNC
- 5/8UN
- G5/8
- R5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- M6
- No6UN
- №6-32UNC
- M7
- PG7
- 7/8UN
- G7/8
- R7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/16UN
- 7/16-20UNF
- 7/16-14UNC
- M8
- No8UN
- №8-32UNC
- M9
- PG9
- 9/16UN
- 9/16-18UNF
- 9/16-12UNC
- SM9/32
- SM9/64
- M10
- No10UN
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- SM11/64
- M12
- No12UN
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- M17
- M18
- M19
- M20
- M21
- M22
- M23
- M24
- M25
- M26
- M27
- M28
- M30
- M32
- M33
- M34
- M35
- M36
- M38
- M39
- M40
- M42
- M45
- M48
- M56
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (13)
- OSG (105)
- YAMAWA (25)
- SANDVIK (3)
- GUHRING (2)
- Nachi-Fujikoshi (2)
- NOGA JAPAN (2)
- RUKO (1)
- Trusco Nakayama (1)
- ENGINEER (0)
- NEWSTRONG (0)
- Rennsteig Tools (0)
- TANOI (0)
- ISHIHASHI (0)
- SKC (0)
- LIGHTSEIKI (0)
- UNION TOOL (0)
- NS TOOL (0)
- EIKOSHA (0)
- ESCO (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy