(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
UNION TOOL Carbide Ball End Mill
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
HM Coated 2-Flute, Long Neck Ball HSLB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)- Volume Discount
Days to Ship: 8 Days or more -
UT COAT 2-Flute Long-Neck Ball CSLEB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•Shank Taper Angle Bta (°): 11°- Volume Discount
Days to Ship: 8 Days or more -
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°- Volume Discount
Days to Ship: 8 Days or more -
CFB for Raw Material to Processing, 3-Flute Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°- Volume Discount
Days to Ship: 8 Days or more -
HFB, HM Coated 4-Flute High-Efficiency Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°- Volume Discount
Days to Ship: 8 Days or more -
DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): -0.01～0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
UNION TOOL
•Model: Long Neck Bore
For complete product overview and details on Union Tool Carbide End Mill see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)- Volume Discount
Days to Ship: 8 Days or more -
HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.005～0.005
•Overall Length (L) (mm): 50- Volume Discount
Days to Ship: 10 Days or more -
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
HLB, HM Coated 2-Flute Long Neck Ball
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.002～0.002
•With/Without Torsion: Available- Volume Discount
Days to Ship: 9 Days or more -
HTNB HM Coated High-Precision Taper Neck Ball
UNION TOOL
•Model: Tapered Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.005～0.005
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
DCB 2-Flute Diamond-Coated Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): -0.01～0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
CGB2000 2-Flute Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): -0.01～0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
CGB4000 4-Flute Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: Non-Coated
•R Precision (µm): -0.01～0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 9 Days or more -
CPRB for Resin Processing, 2-Flute Long Neck Ball
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): -0.01～0.01
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 11°- Volume Discount
Days to Ship: 8 Days or more -
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Others
•R Precision (µm): -0.01～0.01
•With/Without Torsion: NA- Volume Discount
Days to Ship: 8 Days or more -
UT COAT 3-Flute Long-Neck Ball CFLB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 3
•Coating: TiCN
•With/Without Torsion: Available- Volume Discount
Days to Ship: 8 Days or more -
Carbide 2-Flute Ball End Mill UDCB F
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Others
•R Precision (µm): ±0.01
•Overall Length (L) (mm): 50- Volume Discount
Days to Ship: 8 Days or more -
Union Tool, Carbide 2-Blade, Ball End Mill UDCLB F
UNION TOOL
•Model: Long Neck Bore
•Link Diameter (d) (mm): 4
•Shank Taper Angle Bta (°): 16- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| R Size(mm) |
| Model |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Coating |
| Overall Length (L)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Link Diameter (d)(mm) |
| R Precision(µm) |
| Processing Applications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL | UNION TOOL |
| Product Series | DCLB 2-Flute Diamond-Coated Long Neck Ball for Graphite Processing | HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only) | |||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| R Size(mm) | 0.05 ～ 3 | 0.05 ～ 3 | 1 ～ 6 | 0.3 ～ 6 | 1 ～ 6 | 0.2 ～ 3 | R0.1 ～ R3 | 0.03 ～ 6 | 0.1 ～ 0.75 | 1.5 ～ 6 | 0.4 ～ 3 | 0.1 ～ 2 | 0.5 ～ 6 | 0.2 ～ 6 | 2 ～ 10 | 0.2 ～ 3 | R0.05 ～ R6 | 0.1 ～ 3 | 0.3 ～ 3 | R0.35 ～ R0.75 | R0.3 ～ R1 |
| Model | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Long Neck Bore | Tapered Neck Bore | Bore | Bore | Bore | Long Neck Bore | Bore | Bore | Long Neck Bore | Bore | Long Neck Bore |
| Work Material | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | - | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] | - | - |
| Flute Length (ℓ)(mm) | 0.08 ～ 4.8 | 0.08 ～ 4.8 | 3 ～ 18 | 0.9 ～ 18 | 3 ～ 18 | 0.32 ～ 6 | 0.14 ～ 4.2 | 0.06 ～ 22 | 0.3 ～ 2.5 | 4.5 ～ 25 | 0.64 ～ 4.8 | 0.16 ～ 3.2 | 5 ～ 55 | 0.8 ～ 55 | 20 ～ 60 | 0.4 ～ 6 | 0.1 ～ 22 | 0.14 ～ 4.2 | 0.48 ～ 4.8 | 0.49 ～ 1.05 | 0.42 ～ 1.4 |
| Number of Flutes(sheet) | 2 | 2 | 4 | 3 | 4 | 2 | - | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 3 | 2 | - |
| Coating | For High Hardness (Silicone-Based) | TiCN | For High Hardness (Silicone-Based) | TiCN | For High Hardness (Silicone-Based) | Diamond Coat | - | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Diamond Coat | Non-Coated | Non-Coated | Non-Coated | TiCN | Others | TiCN | Others | - |
| Overall Length (L)(mm) | 45 ～ 120 | 45 ～ 120 | 40 ～ 60 | 50 ～ 120 | 50 ～ 110 | 45 ～ 120 | 50 ～ 60 | 50 ～ 110 | 50 | 80 ～ 200 | 45 ～ 80 | 50 ～ 120 | 60 ～ 180 | 60 ～ 200 | 100 ～ 250 | 45 ～ 120 | 50 ～ 110 | 50 ～ 60 | 50 ～ 90 | 50 | 50 ～ 60 |
| Length Under Neck (ℓ1)(mm) | 0.3 ～ 60 | 0.3 ～ 60 | - | - | - | 2 ～ 80 | 0.1 ～ 15 | - | - | - | 3 ～ 30 | 1.5 ～ 62 | - | - | - | 1 ～ 50 | - | - | 2 ～ 40 | - | 1 ～ 20 |
| Link Diameter (d)(mm) | 3 ～ 6 | 3 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 | 3 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 ～ 12 | 4 ～ 12 | 4 ～ 20 | 4 ～ 6 | 4 ～ 12 | 4 ～ 6 | 4 ～ 6 | 4 | 4 |
| R Precision(µm) | -0.005～0.005 ～ -0.002～0.002 | -0.005～0.005 ～ -0.002～0.002 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 ～ -0.005～0.005 | -0.01～0.01 | - | -0.007～0.007 ～ -0.002～0.002 | -0.005～0.005 | -0.007～0.007 ～ -0.005～0.005 | -0.002～0.002 | -0.005～0.005 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.01～0.01 | -0.007～0.007 ～ -0.005～0.005 | -0.01～0.01 | -0.007～0.007 ～ -0.005～0.005 | ±0.01 | - |
| Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | - | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | - | - |
Loading...
Configure
Specification/Dimensions
-
Metric / Inch
-
R Size(mm)
- 0.005
- 0.01
- 0.015
- 0.02
- 0.025
- 0.03
- 0.04
- 0.05
- R0.05
- 0.075
- 0.1
- R0.1
- 0.125
- 0.15
- R0.15
- 0.175
- 0.2
- R0.2
- 0.225
- 0.25
- R0.25
- 0.275
- 0.3
- R0.3
- 0.325
- 0.35
- R0.35
- 0.375
- 0.4
- R0.4
- 0.425
- 0.45
- R0.45
- 0.475
- 0.5
- R0.5
- 0.55
- R0.55
- 0.6
- R0.6
- 0.65
- R0.65
- 0.7
- R0.7
- 0.75
- R0.75
- 0.8
- R0.8
- 0.85
- R0.85
- 0.9
- R0.9
- 0.95
- R0.95
- 1
- R1
- 1.05
- 1.1
- 1.15
- 1.2
- 1.25
- R1.25
- 1.3
- 1.35
- 1.4
- 1.45
- 1.5
- R1.5
- 1.55
- 1.6
- 1.65
- 1.7
- 1.75
- R1.75
- 1.8
- 1.85
- 1.9
- 1.95
- 2
- R2
- 2.05
- 2.1
- 2.15
- 2.2
- 2.25
- R2.25
- 2.3
- 2.35
- 2.4
- 2.45
- 2.5
- R2.5
- 2.55
- 2.6
- 2.65
- 2.7
- 2.75
- R2.75
- 2.8
- 2.85
- 2.9
- 2.95
- 3
- R3
- R 3.0
- 3.05
- 3.1
- 3.15
- 3.175
- 3.2
- 3.25
- R3.25
- 3.3
- 3.35
- 3.4
- 3.45
- 3.5
- R3.5
- 3.55
- 3.6
- 3.65
- 3.7
- 3.75
- R3.75
- 3.8
- 3.85
- 3.9
- 3.95
- 4
- R4
- 4.05
- 4.1
- 4.15
- 4.2
- 4.25
- R4.25
- 4.3
- 4.35
- 4.4
- 4.45
- 4.5
- R4.5
- 4.55
- 4.6
- 4.65
- 4.7
- 4.75
- 4.8
- 4.85
- 4.9
- 4.95
- 5
- R5
- 5.05
- 5.1
- 5.15
- 5.2
- 5.25
- 5.3
- 5.35
- 5.4
- 5.45
- 5.5
- R5.5
- 5.55
- 5.6
- 5.65
- 5.7
- 5.75
- 5.8
- 5.85
- 5.9
- 5.95
- 6
- R6
- 6.05
- 6.1
- 6.15
- 6.2
- 6.25
- 6.3
- 6.35
- 6.4
- 6.45
- 6.5
- 6.55
- 6.6
- 6.65
- 6.7
- 6.75
- 6.8
- 6.85
- 6.9
- 6.95
- 7
- 7.05
- 7.1
- 7.15
- 7.2
- 7.25
- 7.3
- 7.35
- 7.4
- 7.45
- 7.5
- 7.55
- 7.6
- 7.65
- 7.7
- 7.75
- 7.8
- 7.85
- 7.9
- 7.95
- 8
- 8.05
- 8.1
- 8.15
- 8.2
- 8.25
- 8.3
- 8.35
- 8.4
- 8.45
- 8.5
- 8.55
- 8.6
- 8.65
- 8.7
- 8.75
- 8.8
- 8.85
- 8.9
- 8.95
- 9
- 9..5
- 9.05
- 9.1
- 9.15
- 9.2
- 9.25
- 9.3
- 9.35
- 9.4
- 9.45
- 9.5
- 9.55
- 9.6
- 9.65
- 9.7
- 9.75
- 9.8
- 9.85
- 9.9
- 9.95
- 10
- 10.25
- 10.5
- 10.75
- 11
- 11.5
- 12
- 12.25
- 12.5
- 12.75
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 22
- 22.5
- 23
- 24
- 25
-
Model
- Bore
- Long Neck Bore
- Tapered Neck Bore
- Spherical Bore
-
Work Material
-
Flute Length (ℓ)(mm)
-
0.01～0.96
- 0.01
- 0.02
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.1
- 0.12
- 0.14
- 0.15
- 0.16
- 0.2
- 0.21
- 0.23
- 0.24
- 0.28
- 0.3
- 0.32
- 0.35
- 0.38
- 0.4
- 0.42
- 0.45
- 0.48
- 0.49
- 0.5
- 0.56
- 0.6
- 0.63
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.76
- 0.8
- 0.84
- 0.9
- 0.95
- 0.96
-
1～1.9
- 1
- 1.05
- 1.1
- 1.12
- 1.2
- 1.25
- 1.26
- 1.28
- 1.3
- 1.4
- 1.44
- 1.45
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
-
3～3.9
- 3
- 3.2
- 3.25
- 3.5
- 3.6
- 3.7
- 3.75
- 3.8
- 3.85
- 3.9
-
4～4.8
- 4
- 4.1
- 4.2
- 4.25
- 4.4
- 4.5
- 4.75
- 4.8
-
5～5.9
- 5
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.6
- 5.7
- 5.9
-
6～6.9
- 6
- 6.2
- 6.25
- 6.3
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.5
- 7
- 7.1
- 7.2
- 7.4
- 7.5
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.9
-
9～9.7
- 9
- 9.5
- 9.7
-
10～10.5
- 10
- 10.5
-
11～11.5
- 11
- 11.2
- 11.5
-
12～12.7
- 12
- 12.5
- 12.7
-
13～13.5
- 13
- 13.5
-
14～14.5
- 14
- 14.5
-
15
-
16～16.5
- 16
- 16.5
-
18
-
19
-
20
-
22
-
23
-
24
-
25
-
26
-
28
-
30
-
32
-
34
-
35
-
36
-
38
-
40
-
45
-
48
-
50
-
55
-
58
-
60
-
65
-
70
-
80
-
90
-
100
-
110
-
120
-
130
-
-
Number of Flutes(sheet)
-
Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- DLC
- CrN
- Diamond Coat
- Non-Coated
- MRC
- DG
- Others
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Link Diameter (d)(mm)
-
R Precision(µm)
-
Processing Applications
Narrow search by specifying Manufacturer
-
- MISUMI (39)
- OSG (52)
- NS TOOL (31)
- UNION TOOL (21)
- EIKOSHA (13)
- DIJET (12)
- KYOWASEIKO (9)
- Nachi-Fujikoshi (8)
- GUHRING (7)
- OKAZAKI (6)
- 7 LEADERS (4)
- ATOM (3)
- ASAHI TOOLS (2)
- CREATE TOOL (1)
- Poulten&Graf (1)
- S&K (1)
- VAN HOORN (1)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy