(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
SINWASOKUTEI
[Features]
· Angle can be adjusted freely.
· Includes set screws which allow it to be fixed at set angles.
[Applications]
· For setting, scribing, or copying the desired angle
· For mortise construction, inking, etc.
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
Perfect set square for right angle checking on machined materials and products.
[Features]
· With square root scale to clarify timber dimensions. (Square-Root Scale at Back)
· Both front and back have metric scales. (Same-division scale for the front and back sides)
[Applications]
· To be used for right angle inspection or scribing.
· To be used for checking right angles for processing material or products by using the interior and exterior right angles.
Days to Ship: | 8 Days or more |
---|
Mini Machinist Square, with Brass Table
SINWASOKUTEI
[Features]
· A small set square ideal for hobbies
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
[Features]
· A two-in-one type that can be used as a miter rule or a full set square.
· One side can be inked at 45 degrees.
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
[Features]
· Used for 45° verification, line drawing, and scribing
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
[Features]
· The trapezoidal angled ruler is different from the usual angled ruler, and can mark off a right angle at 45° to the right and left in a single action just by sliding, with no need to flip the body over.
· Highly stable wide table
· Very convenient for fixing skirting boards
[Applications]
· Used for verifying 45° and 90° angles
· Used for scribing material when making a 45° connection
Days to Ship: | 8 Days or more |
---|
SINWASOKUTEI
[Features] Wide base for outstanding stability
· Very convenient for fixing skirting boards
[Applications]
· Used for verifying 45° and 90° angles
· Used for scribing material when making a 45° connection
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel with Angle Scale and Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace. Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Easily tightened screws are adopted.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Set Square with Aluminum Stand, without Scale
SINWASOKUTEI
[Features]
· Set square suitable for woodwork.
· Various sizes between 20 cm and 1 m are available.
· Also useful when assembling a wooden model from the surface plate or measuring right angles.
· Long rod length is convenient for scribing many pieces of material at once.
· For inspection and scribing at right angles
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel with Gradient Scale and Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace.
· Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Writing tape has been adhered to record the measured angle.
· Use for improving work efficiency by drawing angles using pen, pencil, etc. (pencil markings can be erased completely with an eraser)
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel without Scale and with Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace. Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Writing tape has been adhered to record the measured angle. Use for improving work efficiency by drawing angles using pen, pencil, etc.
Days to Ship: | 11 Days or more |
---|
SINWASOKUTEI
A set square for measuring rounded curves, diameters, and length.
[Features]
· The first of its kind, a 3 in 1 scale which can be used as an R gauge, diameter gauge, and bench rule.
· Compact size, allowing quick access and measurement.
[Applications]
· Ideal for measuring rounded curves, diameters, and length.
Days to Ship: | 8 Days or more |
---|
Aluminum Sliding Bevel with Brace
SINWASOKUTEI
[Features]
· Useful for checking the angle for welding.
· The rod moves left and right, so symmetrical positioning is easy.
· Securely fixed with brace. Prevents changes in the angle while working.
· Made of aluminum and lightweight, making even work in high places easy.
· The rod is thick, and can be used as guide ruler for a circular saw.
· The angle scale is at a 1 degree pitch (20-120°), and the gradient scale is at a 1" pitch (flat gradient, steep gradient 0-10).
· Easily tightened screws are adopted.
· Writing tape has been adhered to record the measured angle.
Use for improving work efficiency by drawing angles using pen, pencil, etc.
(Pencil markings can be erased completely with an eraser)
[Applications]
· For copying or scribing an arbitrary angle such as a roof inclination, etc.
· Measure gradients and use as a guide ruler for circular saws as is.
· With scale for length measurement.
Days to Ship: | 9 Days or more |
---|
SINWASOKUTEI
[Features]
· The rod has scale markings so it can also be used for measuring dimensions.
· As the base of the stand is large, it is easy to verify perpendicularity.
[Applications]
· For right angle inspection or scribing.
· For 45° scribing.
Days to Ship: | 9 Days or more |
---|
SINWASOKUTEI
[Features]
· Includes an angle/gradient scale. Very useful for setting and reading angles (gradients).
· Legs are removable, allowing use for lead frame leveling when attached, and as a tool for basic center marking (reference lines) or angle measuring tool with the legs removed. Further, since the legs expand and contract from 50 cm to 80 cm, it can also support a high base.
[Applications]
· For lead frame leveling or right-angle leveling in basic center marking (reference lines).
· For copying angles and gradients in lieu of a free angle ruler.
Days to Ship: | 12 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Product Model |
Beam Length(mm) |
Precision(mm) |
Angle(°) |
Stand Length(mm) |
Scale |
Brand | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI | SINWASOKUTEI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | ||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 12 Days or more |
Product Model | Free Speed Square | Stand With Speed Square | Stand With Speed Square | Stand With Speed Square | Locking Type Speed Square | Locking Type Speed Square | Locking Type Speed Square | Free Speed Square | Free Speed Square | Stand With Speed Square | Free Speed Square | Free Speed Square | Others | Angled Ruler | Others | Others |
Beam Length(mm) | - | 161 ~ 177 | 45 ~ 90 | 170 | 172 | - | - | - | - | - | - | - | - | - | 200 ~ 300 | 1800 |
Precision(mm) | - | - | - | - | - | - | - | - | - | 0.1 mm or less per 100 mm | - | - | ±0.1 (R gauge) / ±0.05 (diameter gauge) / ±0.15 (ruler) | - | - | - |
Angle(°) | - | 90 | 90 | 45/90 | 45 | 45/90 | 45/90 | 20~120 | - | 90 | - | - | - | - | - | - |
Stand Length(mm) | - | 94 | 35 ~ 55 | 163 | 115 | - | - | - | - | - | - | - | - | - | - | - |
Scale | Not Included | Included | Not Included | Included | Included / Not Included | Included | Included | Included | Not Included | Not Included | Included | Not Included | Included | Not Included | Included | Included |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy