While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

S&K Square End Mills (HSS)（Work Material：Heat-Treated Steel）

23 items

: 30; 45; 60

Days to Ship	All Same day 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less 16 Days or Less

VS2T 2-Flute Short

S&K

A 2-flute end mill for finish machining.

Volume Discount
Days to Ship: 6 Days or more
LVS2T 2-Flute Blade Long Blade

S&K

A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Volume Discount
Days to Ship: 8 Days or more
KHB2TS Hybrid Short 2-Flute Blade

S&K

A 2-flute end mill for finish machining. Abrasion resistance is excellent and high efficiency machining is possible.

[Features]
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high efficiency and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

Volume Discount
Days to Ship: 10 Days or more
P-VS2T P Coated 2-Flute Short Blade

S&K

[Features]
· P coating provides excellent surface flatness and abrasion resistance.
· A 2-flute end mill for finish machining.

Volume Discount
Days to Ship: 10 Days or more
SS2T S Coated Estech 2-Flute Short

S&K

2-flute endmill with TiCN coating. Can be used widely for milling of grooves, sides, holes, etc.

Volume Discount
Days to Ship: 8 Days or more
SS2TM S Coated Estech 2-Flute Regular

S&K

[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of machining applications, due to the regular flute length.
· High grade powder metallurgy HSS with S-coating.
· Enables a wide range of machining applications, due to the regular flute length.

Volume Discount
Days to Ship: 8 Days or more
SS2TL S Coated Estech 2-Flute Long

S&K

[Features]
· 2-flute finishing endmill with TiCN coating.
· Can be used widely for milling of grooves, sides, holes, etc.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.

Volume Discount
Days to Ship: 10 Days or more
STEC2T ESTECH 2-Flute Short Blade

S&K

[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.

Volume Discount
Days to Ship: 10 Days or more
STEC2TM ESTECH 2-Flute Regular Blade

S&K

[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of machining applications, due to the regular flute length.

Volume Discount
Days to Ship: 8 Days or more
STEC2TL ESTECH 2-Flute Long Blade

S&K

[Features]
· A 2-flute end mill for finish machining.
· Can be used widely for milling of grooves, sides, holes, etc.
· Uses high grade powder metallurgy HSS.
· Enables a wide range of side machining and deep engraving, due to the long flute length.

Volume Discount
Days to Ship: 8 Days or more
VSM2T 2-Flute Regular

S&K

A 2-flute end mill for finish machining. Enables a wide range of machining applications, due to the regular flute length.

Volume Discount
Days to Ship: 8 Days or more
KHB4TS Hybrid Short 4-Flute Blade

S&K

[Features]
· A 4-flute end mill for finish machining.
· Abrasion resistance is excellent and high efficiency machining is possible.
· A next-generation end mill that combines the characteristics of HSS (toughness, etc.) and carbide (high efficiency, etc.).
· Can be used from raw materials to high hardness materials, hard to chip, and usable without worries for long hours.
· Furthermore, machining speed is equivalent to carbide, providing "high functionality and safety".
· Processing of high-speed steel substrate creates a cost difference from carbide substrates, reducing costs.

Volume Discount
Days to Ship: 10 Days or more
P-VS3T P Coated 3-Flute Short Blade

S&K

[Features]
· A 3-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance

Volume Discount
Days to Ship: 10 Days or more
P-VS4T P Coated 4-Flute Short Blade

S&K

[Features]
· A 4-flute end mill for finish machining.
· P coating provides excellent surface flatness and abrasion resistance.

Volume Discount
Days to Ship: 8 Days or more
SS4T S Coated Estech 4-Flute Short

S&K

[Features]
· 4-flute finishing endmill with TiCN coating.
· High grade powder metallurgy HSS with S-coating.
· Ideal for Finish Machining

Volume Discount
Days to Ship: 9 Days or more
SS4TL S Coated Estech 4-Flute Long

S&K

[Features]
· 4-flute finishing endmill with TiCN coating.
· Enables a wide range of side machining and deep engraving, due to the long flute length.
· High grade powder metallurgy HSS with S-coating.

Volume Discount
Days to Ship: 8 Days or more
STEC4T ESTECH 4-Flute Short Blade

S&K

[Features]
· Uses high grade powder metallurgy HSS.
· Ideal for finish machining.
· A 4-flute end mill for finish machining.

Volume Discount
Days to Ship: 10 Days or more
STEC4TL ESTECH 4-Flute Long Blade

S&K

A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Volume Discount
Days to Ship: 10 Days or more
VS4T 4-Flute Short

S&K

[Features]
· A 4-flute end mill for finish machining.
· The outer diameter tolerance is negative (φ2-50).

Volume Discount
Days to Ship: 8 Days or more
VSM4T 4-Flute Regular

S&K

A 4-flute end mill for finish machining. The outer diameter tolerance is positive.

Volume Discount
Days to Ship: 8 Days or more
LVS4T 4-Flute Blade Long Blade

S&K

A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.

Volume Discount
Days to Ship: 7 Days or more
SM Straight Shank for Key Grooves

S&K

Endmill dedicated for key groove machining. The outer diameter tolerance is positive.

Volume Discount
Days to Ship: 9 Days or more
SL Regular Slotting Blade

S&K

Straight blade type 2-flute end mill.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	6 Days or more

Days to Ship:	8 Days or more

Days to Ship:	10 Days or more

Days to Ship:	10 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	10 Days or more

Days to Ship:	10 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	10 Days or more

Days to Ship:	10 Days or more

Days to Ship:	8 Days or more

Days to Ship:	9 Days or more

Days to Ship:	8 Days or more

Days to Ship:	10 Days or more

Days to Ship:	10 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	7 Days or more

Days to Ship:	9 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Flute Diameter (D)(φ)
Flute Length (ℓ)(mm)
Work Material
Flute Shape Type
Number of Flutes(sheet)
Tool Material Type
Processing Applications
Link Diameter (d)(mm)
Coating
Overall Length (L)(mm)
Helix Angle (θ)
Base-Blade Availability
Length Under Neck (ℓ1)(mm)
Link


Brand	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K	S&K
Product Series	VS2T 2-Flute Short	LVS2T 2-Flute Blade Long Blade	KHB2TS Hybrid Short 2-Flute Blade	P-VS2T P Coated 2-Flute Short Blade	SS2T S Coated Estech 2-Flute Short	SS2TM S Coated Estech 2-Flute Regular	SS2TL S Coated Estech 2-Flute Long	STEC2T ESTECH 2-Flute Short Blade	STEC2TM ESTECH 2-Flute Regular Blade	STEC2TL ESTECH 2-Flute Long Blade	VSM2T 2-Flute Regular	KHB4TS Hybrid Short 4-Flute Blade	P-VS3T P Coated 3-Flute Short Blade	P-VS4T P Coated 4-Flute Short Blade	SS4T S Coated Estech 4-Flute Short	SS4TL S Coated Estech 4-Flute Long	STEC4T ESTECH 4-Flute Short Blade	STEC4TL ESTECH 4-Flute Long Blade	VS4T 4-Flute Short	VSM4T 4-Flute Regular	LVS4T 4-Flute Blade Long Blade	SM Straight Shank for Key Grooves	SL Regular Slotting Blade
Days to Ship	6 Days or more	8 Days or more	10 Days or more	10 Days or more	8 Days or more	8 Days or more	10 Days or more	10 Days or more	8 Days or more	8 Days or more	8 Days or more	10 Days or more	10 Days or more	8 Days or more	9 Days or more	8 Days or more	10 Days or more	10 Days or more	8 Days or more	8 Days or more	7 Days or more	9 Days or more	8 Days or more
Flute Diameter (D)(φ)	1 ～ 60	3 ～ 50	5 ～ 30	3 ～ 30	1 ～ 40	3 ～ 20	3 ～ 40	1 ～ 40	3 ～ 20	3 ～ 30	3 ～ 14	5 ～ 30	3 ～ 30	3 ～ 30	3 ～ 40	3 ～ 40	3 ～ 40	3 ～ 40	3 ～ 60	3 ～ 40	3 ～ 60	3 ～ 25	2 ～ 49
Flute Length (ℓ)(mm)	2 ～ 85	20 ～ 250	10 ～ 55	8 ～ 55	2 ～ 65	10 ～ 55	15 ～ 105	2 ～ 65	10 ～ 55	15 ～ 105	10 ～ 35	15 ～ 55	10 ～ 55	10 ～ 55	10 ～ 65	15 ～ 105	10 ～ 65	15 ～ 105	10 ～ 85	10 ～ 65	20 ～ 300	5 ～ 25	10 ～ 60
Work Material	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[◎]	Heat-Treated Steel[○]	Heat-Treated Steel[◎]	Heat-Treated Steel[◎]	Heat-Treated Steel[◎]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[◎]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[◎]	Heat-Treated Steel[◎]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]	Heat-Treated Steel[○]
Flute Shape Type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Number of Flutes(sheet)	2	2	2	2	2	2	2	2	2	2	2	4	3	4	4	4	4	4	4	4	4	2	2
Tool Material Type	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel	Cobalt High-Speed Steel
Processing Applications	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Groove / Inclined Cutting	Flat Surface / Side Surface	Groove	Flat Surface / Side Surface / Groove / Inclined Cutting
Link Diameter (d)(mm)	6 ～ 42	6 ～ 42	8 ～ 25	6 ～ 25	6 ～ 32	6 ～ 20	6 ～ 32	6 ～ 32	6 ～ 20	6 ～ 25	6 ～ 12	8 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 32
Coating	Non-Coated	Non-Coated	For High Hardness (Silicone-Based)	For General Steel (AlCrN etc.)	TiCN	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	For High Hardness (Silicone-Based)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	TiCN	TiCN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Overall Length (L)(mm)	50 ～ 185	60 ～ 345	60 ～ 135	50 ～ 135	50 ～ 150	60 ～ 130	55 ～ 190	50 ～ 150	60 ～ 130	55 ～ 185	50 ～ 90	60 ～ 135	50 ～ 135	50 ～ 135	50 ～ 150	55 ～ 190	50 ～ 150	55 ～ 190	50 ～ 185	50 ～ 150	60 ～ 395	50 ～ 95	60 ～ 170
Helix Angle (θ)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Weak Helix (15 to 25°)	Without Torsion
Base-Blade Availability	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included	Included
Length Under Neck (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Link	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Metric / Inch
- metric
Clear

Flute Diameter (D)(φ)
- 0.45～0.9
  - 0.45
  - 0.8
  - 0.9
- 1～1.9
  - 1
  - 1/2
  - 1.1
  - 1.2
  - 1.3
  - 1.4
  - 1.5
  - 1.59
  - 1.6
  - 1.7
  - 1.8
  - 1.9
- 2～2.9
  - 2
  - 2.1
  - 2.2
  - 2.3
  - 2.38
  - 2.4
  - 2.5
  - 2.6
  - 2.7
  - 2.8
  - 2.9
- 3～3.97
  - 3
  - 3/4
  - 3.1
  - 3.18
  - 3.2
  - 3.3
  - 3.4
  - 3.5
  - 3.6
  - 3.7
  - 3.8
  - 3.9
  - 3.97
- 4～4.9
  - 4
  - 4.1
  - 4.2
  - 4.3
  - 4.4
  - 4.5
  - 4.6
  - 4.7
  - 4.76
  - 4.8
  - 4.9
- 5～5.9
  - 5
  - 5/8
  - 5.1
  - 5.2
  - 5.3
  - 5.4
  - 5.5
  - 5.56
  - 5.6
  - 5.7
  - 5.8
  - 5.9
- 6～6.9
  - 6
  - 6.05
  - 6.1
  - 6.2
  - 6.3
  - 6.35
  - 6.4
  - 6.5
  - 6.6
  - 6.7
  - 6.8
  - 6.9
- 7～7.94
  - 7
  - 7/8
  - 7.1
  - 7.2
  - 7.3
  - 7.4
  - 7.5
  - 7.6
  - 7.7
  - 7.8
  - 7.9
  - 7.94
- 8～8.9
  - 8
  - 8.1
  - 8.2
  - 8.3
  - 8.4
  - 8.5
  - 8.6
  - 8.7
  - 8.8
  - 8.9
- 9～9.9
  - 9
  - 9.1
  - 9.2
  - 9.3
  - 9.4
  - 9.5
  - 9.53
  - 9.6
  - 9.7
  - 9.8
  - 9.9
- 10～10.9
  - 10
  - 10.1
  - 10.2
  - 10.3
  - 10.4
  - 10.5
  - 10.6
  - 10.7
  - 10.8
  - 10.9
- 11～11.9
  - 11
  - 11.1
  - 11.11
  - 11.2
  - 11.3
  - 11.4
  - 11.5
  - 11.6
  - 11.7
  - 11.8
  - 11.9
- 12～12.9
  - 12
  - 12.1
  - 12.2
  - 12.3
  - 12.4
  - 12.5
  - 12.6
  - 12.7
  - 12.8
  - 12.9
- 13～13.9
  - 13
  - 13.1
  - 13.2
  - 13.3
  - 13.4
  - 13.5
  - 13.6
  - 13.7
  - 13.8
  - 13.9
- 14～14.9
  - 14
  - 14.1
  - 14.2
  - 14.29
  - 14.3
  - 14.4
  - 14.5
  - 14.6
  - 14.7
  - 14.8
  - 14.9
- 15～15.9
  - 15
  - 15.1
  - 15.2
  - 15.3
  - 15.4
  - 15.5
  - 15.6
  - 15.7
  - 15.8
  - 15.88
  - 15.9
- 16～16.9
  - 16
  - 16.1
  - 16.2
  - 16.3
  - 16.4
  - 16.5
  - 16.6
  - 16.7
  - 16.8
  - 16.9
- 17～17.9
  - 17
  - 17.1
  - 17.2
  - 17.3
  - 17.4
  - 17.46
  - 17.5
  - 17.6
  - 17.7
  - 17.8
  - 17.9
- 18～18.9
  - 18
  - 18.1
  - 18.2
  - 18.3
  - 18.4
  - 18.5
  - 18.6
  - 18.7
  - 18.8
  - 18.9
- 19～19.9
  - 19
  - 19.05
  - 19.1
  - 19.2
  - 19.3
  - 19.4
  - 19.5
  - 19.6
  - 19.7
  - 19.8
  - 19.9
- 20～20.9
  - 20
  - 20.1
  - 20.2
  - 20.3
  - 20.4
  - 20.5
  - 20.6
  - 20.64
  - 20.7
  - 20.8
  - 20.9
- 21～21.9
  - 21
  - 21.1
  - 21.2
  - 21.3
  - 21.4
  - 21.5
  - 21.6
  - 21.7
  - 21.8
  - 21.9
- 22～22.9
  - 22
  - 22.1
  - 22.2
  - 22.23
  - 22.3
  - 22.4
  - 22.5
  - 22.6
  - 22.7
  - 22.8
  - 22.9
- 23～23.9
  - 23
  - 23.1
  - 23.2
  - 23.3
  - 23.4
  - 23.5
  - 23.6
  - 23.7
  - 23.8
  - 23.81
  - 23.9
- 24～24.9
  - 24
  - 24.1
  - 24.2
  - 24.3
  - 24.4
  - 24.5
  - 24.6
  - 24.7
  - 24.8
  - 24.9
- 25～25.9
  - 25
  - 25.1
  - 25.2
  - 25.3
  - 25.4
  - 25.5
  - 25.6
  - 25.7
  - 25.8
  - 25.9
- 26～26.9
  - 26
  - 26.1
  - 26.2
  - 26.3
  - 26.4
  - 26.5
  - 26.6
  - 26.7
  - 26.8
  - 26.9
- 27～27.9
  - 27
  - 27.1
  - 27.2
  - 27.3
  - 27.4
  - 27.5
  - 27.6
  - 27.7
  - 27.8
  - 27.9
- 28～28.9
  - 28
  - 28.1
  - 28.2
  - 28.3
  - 28.4
  - 28.5
  - 28.6
  - 28.7
  - 28.8
  - 28.9
- 29～29.9
  - 29
  - 29.1
  - 29.2
  - 29.3
  - 29.4
  - 29.5
  - 29.6
  - 29.7
  - 29.8
  - 29.9
- 30～30.9
  - 30
  - 30.1
  - 30.2
  - 30.3
  - 30.4
  - 30.5
  - 30.6
  - 30.7
  - 30.8
  - 30.9
- 31～31.9
  - 31
  - 31.1
  - 31.2
  - 31.3
  - 31.4
  - 31.5
  - 31.6
  - 31.7
  - 31.75
  - 31.8
  - 31.9
- 32～32.9
  - 32
  - 32.1
  - 32.2
  - 32.3
  - 32.4
  - 32.5
  - 32.6
  - 32.7
  - 32.8
  - 32.9
- 33～33.9
  - 33
  - 33.1
  - 33.2
  - 33.3
  - 33.4
  - 33.5
  - 33.6
  - 33.7
  - 33.8
  - 33.9
- 34～34.9
  - 34
  - 34.1
  - 34.2
  - 34.3
  - 34.4
  - 34.5
  - 34.6
  - 34.7
  - 34.8
  - 34.9
- 35～35.9
  - 35
  - 35.1
  - 35.2
  - 35.3
  - 35.4
  - 35.5
  - 35.6
  - 35.7
  - 35.8
  - 35.9
- 36～36.9
  - 36
  - 36.1
  - 36.2
  - 36.3
  - 36.4
  - 36.5
  - 36.6
  - 36.7
  - 36.8
  - 36.9
- 37～37.9
  - 37
  - 37.1
  - 37.2
  - 37.3
  - 37.4
  - 37.5
  - 37.6
  - 37.7
  - 37.8
  - 37.9
- 38～38.9
  - 38
  - 38.1
  - 38.2
  - 38.3
  - 38.4
  - 38.5
  - 38.6
  - 38.7
  - 38.8
  - 38.9
- 39～39.9
  - 39
  - 39.1
  - 39.2
  - 39.3
  - 39.4
  - 39.5
  - 39.6
  - 39.7
  - 39.8
  - 39.9
- 40～40.9
  - 40
  - 40.1
  - 40.2
  - 40.3
  - 40.4
  - 40.5
  - 40.6
  - 40.7
  - 40.8
  - 40.9
- 41～41.9
  - 41
  - 41.1
  - 41.2
  - 41.3
  - 41.4
  - 41.5
  - 41.6
  - 41.7
  - 41.8
  - 41.9
- 42～42.9
  - 42
  - 42.1
  - 42.2
  - 42.3
  - 42.4
  - 42.5
  - 42.6
  - 42.7
  - 42.8
  - 42.9
- 43～43.9
  - 43
  - 43.1
  - 43.2
  - 43.3
  - 43.4
  - 43.5
  - 43.6
  - 43.7
  - 43.8
  - 43.9
- 44～44.9
  - 44
  - 44.1
  - 44.2
  - 44.3
  - 44.4
  - 44.5
  - 44.6
  - 44.7
  - 44.8
  - 44.9
- 45～45.5
  - 45
  - 45.5
- 46～46.5
  - 46
  - 46.5
- 47～47.5
  - 47
  - 47.5
- 48～48.5
  - 48
  - 48.5
- 49～49.5
  - 49
  - 49.5
- 50～50.8
  - 50
  - 50.5
  - 50.8
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 85
- 90
- 95
- 100
Drawing

Clear

Flute Length (ℓ)(mm)
1.1

1.6

1.8

2

2.2

2.5

3

3.5

4

4.5

5

5.5

6

6.5

7

7.5

8

9

10

10.5

11

12

13

14

15

16

17

18

19

20

22

23

25

26

28

30

32

33

34

35

38

39

40

45

48

50

53

55

56

58

60

63

65

68

70

75

80

85

90

95

100

105

110

115

120

125

130

150

160

180

200

250

300
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Resin
- Others
- Others 2
- Others 3
- Others 4
Details

Clear

Flute Shape Type
- Square
- For Key Grooves
Clear

Number of Flutes(sheet)
1

2

3

4

6

8

10

12

14

16

18
Clear

Tool Material Type
- Cobalt High-Speed Steel
- Powdered High-Speed Steel
- High-Speed Steel
- Alloy High-Speed Steel
Details

Clear

Processing Applications
- Flat Surface
- Side Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
- Countersunk
- Others
Images

Clear

Link Diameter (d)(mm)
4

5

BS5

6

7

8

9

10

11

12

15

16

19

20

24

25

32

42
Drawing

Clear

Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- TiN
- Non-Coated
- AG
Details

Clear

Overall Length (L)(mm)
- 35
- 40～48
  - 40
  - 42
  - 45
  - 48
- 50～59
  - 50
  - 51
  - 52
  - 53
  - 54
  - 55
  - 56
  - 57
  - 58
  - 59
- 60～69
  - 60
  - 62
  - 63
  - 64
  - 65
  - 66
  - 67
  - 68
  - 69
- 70～79
  - 70
  - 72
  - 73
  - 74
  - 75
  - 76
  - 77
  - 78
  - 79
- 80～89
  - 80
  - 83
  - 84
  - 85
  - 89
- 90～97
  - 90
  - 91
  - 92
  - 95
  - 97
- 100～108
  - 100
  - 101
  - 104
  - 105
  - 108
- 110～119
  - 110
  - 115
  - 116
  - 119
- 120～127
  - 120
  - 121
  - 122
  - 124
  - 125
  - 127
- 130～137
  - 130
  - 132
  - 134
  - 135
  - 137
- 140～149
  - 140
  - 142
  - 144
  - 145
  - 147
  - 149
- 150～155
  - 150
  - 154
  - 155
- 160～169
  - 160
  - 162
  - 165
  - 169
- 170～178
  - 170
  - 173
  - 175
  - 178
- 180～189
  - 180
  - 182
  - 183
  - 184
  - 185
  - 186
  - 188
  - 189
- 190～198
  - 190
  - 191
  - 193
  - 195
  - 198
- 200～208
  - 200
  - 202
  - 203
  - 205
  - 208
- 210～215
  - 210
  - 213
  - 215
- 220～225
  - 220
  - 222
  - 224
  - 225
- 230～235.5
  - 230
  - 233
  - 235
  - 235.5
- 240～245.5
  - 240
  - 245
  - 245.5
- 250～255
  - 250
  - 250.5
  - 253
  - 255
- 260～265
  - 260
  - 265
- 270～275
  - 270
  - 275
- 280～288
  - 280
  - 283
  - 285
  - 288
- 290～295
  - 290
  - 295
- 300
- 340～345
  - 340
  - 345
- 350
- 395
- 400
Drawing

Clear

Helix Angle (θ)
- Without Torsion
- Weak Helix (15 to 25°)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
- Others
Clear

Base-Blade Availability
- Included
Clear

Length Under Neck (ℓ1)(mm)
28

44

58

66
Drawing

Clear

Link
- Straight
Clear

Narrow search by specifying Manufacturer

- MISUMI (34)
- C-Value ()
- OSG (25)
- S&K (23)
- Nachi-Fujikoshi (12)
- ASAHI TOOLS (4)
- EIKOSHA (1)
- FUKUDA (0)
- ESCO (0)
- TAIYO TOOL (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Square End Mills (HSS)

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

S&K Square End Mills (HSS)（Work Material：Heat-Treated Steel）

Configure

Specification/Dimensions

Metric / Inch

Flute Diameter (D)(φ)

Flute Length (ℓ)(mm)

Work Material

Flute Shape Type

Number of Flutes(sheet)

Tool Material Type

Processing Applications

Link Diameter (d)(mm)

Coating

Overall Length (L)(mm)

Helix Angle (θ)

Base-Blade Availability

Length Under Neck (ℓ1)(mm)

Link

Narrow search by specifying Manufacturer

CAD

Related Categories to Square End Mills (HSS)

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)