Nihon Pisco Push to Connect Fittings（Fitting Type：Union, Equal Dia.）

• 

  Tube Fitting for General Piping - Bulkhead Union

  Nihon Pisco

  A wide variety of single action fittings for general piping.
  
  [Features]
  · Single action fitting for general pneumatic piping.
  · After mounting, the resin unit's removal angle can be changed.
  · An extensive lineup of products.
  · Allows for centralized piping.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Different Diameters Union Straight

  Nihon Pisco

  No copper-based metal used. Also optimal for dealing with low-concentration ozone .
  
  [Features]
  · Perfect when additional strength is required for corrosive atmosphere applications.
  · Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  Tube Fitting Polypropylene Type for Clean Environments - Union Elbow

  Nihon Pisco

  PP resin is used for the main body material, making it ideal for clean environments.
  
  [Features]
  · The main body uses Polypropylene resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types available as optional extras.
  · Polypropylene or SUS304 can be selected for the screw part.
  · No oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Selectable from two packaging specifications--normal packaging and clean room packaging--according to the specific application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Union Straight for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Chemical Tube Fitting, Chemical Type, Union Y

  Nihon Pisco

  PPS is used for the main body material, delivering excellent heat resistance, flame retardancy, and chemical resistance.
  
  [Features]
  · The main body uses PPS resin for superior heat resistance, flame retardancy (UL94V-0), and chemical resistance properties.
  · FKM is utilized in the seal.
  · EPDM and NBR types available as optional extras.
  · None of the used parts should be exposed to grease.
  · Also compliant to Food Sanitation Laws of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Available in two packaging specifications--normal packaging and clean room packaging--to fit specific applications.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Bulkhead Union

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and when used in a corrosive atmosphere.
  · Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting for General Piping - Tripod Union

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Various lineup.
  · Can change the take-off angle of the resin body after mounting.
  · Centralized piping is enabled.
  · Light gray types, and clean room packaged types available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting Union Y for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Polypropylene Type Union Straight for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses Polypropylene resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types are available as optional extras.
  · Polypropylene or SUS304 can be selected for the screw element.
  · Use of oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Polypropylene Type Union Y for Clean Environments

  Nihon Pisco

  PP resin is used for the main body material, making it ideal for clean environments.
  
  [Features]
  · The main body uses Polypropylene resin suitable for clean environments.
  · Polypropylene or SUS304 can be selected for the screw element.
  · EPDM is utilized in the seal. Other options include FKM and NBR.
  · Oil-free specifications.
  · Plastic body is clear colored to allow water flow to be observed.
  · Selectable from two packaging specifications--normal packaging and clean room packaging--depending on the specific application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Chemical Type Union Tee for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses PPS resin with superior heat resistance, flame-retardant (UL94V-0) and chemical resistance properties.
  · FKM is utilized in the seal.
  · EPDM and NBR types available as optional extras.
  · The used parts must not be exposed to grease.
  · Compliant with the Food Sanitation Laws of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Two packaging specifications available – normal packaging and clean room packaging – according to the specific application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting for General Piping - Mini Type Union Elbow

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The 1.8 mm diameter type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators, etc.
  · Light gray types and clean room packaged types optionally available.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting Union T for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Plus Union Straight for Sputtering Resistance

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardance and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments where exposure to sparks may occur.
  · Release ring made of brass offers excellent flame retardance and sputter resistance. Cover type prevents sputtering inside the fitting and dust intrusion.
  · An optional spatter cover shuts out fine sparks.
  · By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Corrosion Resistance, SUS304 Fitting, Tripod Union

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304,

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  for Corrosion Resistance, SUS304 Fitting, Union Elbow

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Union A

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and used in a corrosive atmosphere.
  · Metal body uses special stainless steel with corrosion resistance equivalent to SUS303 (Cr19 – 21%; Mo1.5 – 2.5% stainless).
  · Copper-based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Straight

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and when used in a corrosive atmosphere.
  · Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting PP-Series Bulkhead Union P for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses Polypropylene resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types are available as optional extras.
  · Polypropylene or SUS304 can be selected for the screw element.
  · Use of oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Mini-Type Union Straight for General Piping

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and such.
  · Light gray types, and clean room packaged types available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting for General Piping - Mini Type Bulkhead Union

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and such.
  · Light gray types, and clean room packaged types currently available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Sputtering Resistant Tube Fitting Brass Union Elbow

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retarding and sputter resistance. The cover type prevents sputtering inside fitting and dust intrusion.
  · An optional spatter cover that shuts out fine sparks.
  ▪By placing a release ring cover (CS) that is sold separately, sparks cannot enter even through the small gap between the release ring and tube

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Tripod Union

  Nihon Pisco

  No copper-based metal used. Also optimal for dealing with low-concentration ozone .
  
  [Features]
  · Perfect when additional strength is required for corrosive atmosphere applications.
  · Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  Tube Fitting Polypropylene Type Union Tee for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses Polypropylene resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types are available as optional extras.
  · Polypropylene or SUS304 can be selected for the screw element.
  · Use of oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	6 Days or more

• 

  Tube Fitting Chemical Type Union Elbow for Clean Environments

  Nihon Pisco

  [Features]
  · The main body uses PPS resin featuring superior heat resistance, flame retardance (UL94V-0) and chemical resistance.
  · FKM is employed in the seal.
  · EPDM and NBR types are available as optional extras.
  · All parts used must not be exposed to grease.
  · Also compliant with the Food Sanitation Laws of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Two packaging specifications are available--normal packaging and clean room packaging--according to the desired application.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  General Piping Tube Fitting, Cross-Aid

  Nihon Pisco

  A rich assortment of one-touch fittings for general piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Various products available.
  · Can change the take-off angle of the resin body after mounting.
  · Centralized piping is enabled.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Mini Type for Standard Pipe, Cross A

  Nihon Pisco

  Volume successfully reduced by 40% versus the standard type.
  
  [Features]
  · Ultra-small one-touch fitting for general pneumatic piping.
  · Elliptical release ring allows easy tube release.
  · Reduced size with a volume ratio of 40% versus the standard type.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping used for small actuators, etc.
  · Light gray types, and clean room packaged types are available as options.
  · For the clean room packaging specification, fluorinated grease is used.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for General Piping, Tube Fitting Mini-Type Union Y

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and the like.
  · Light gray types, and clean room packaged types are available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Anti Static, Tube Fitting EG, Union Elbow

  Nihon Pisco

  [Features]
  · Static dissipative Resin.
  · Suitable for Electrostatic dissipating and Antistatic Applications.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  Antistatic Tube Fitting EG Union Tee

  Nihon Pisco

  [Features]
  · A static dissipating resin is used (surface resistance: 104 to 107 Ω).
  · Optimal for lines requiring static electricity dissipation and anti-static properties.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  for Sputtering Resistance, Tube Fitting Sputtering, Union Straight

  Nihon Pisco

  [Features]
  · Flame-Retardant Resin. Resistant to Flame and Weld Spatter. (Equivalent to V-0).
  · Release-Ring Cover prevents malfunction of Release-Ring due to the weld spatter.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Sputter Union T for Sputter Resistance

  Nihon Pisco

  [Features]
  · Flame retardant resin is used.
  · Excellent sputter resistance (spark) (V-O comparable product).
  · Equipped with release ring cover.
  · Prevents operational failure of the release ring caused by sputtering.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Plus Bulkhead Union for Sputtering Resistance

  Nihon Pisco

  The main body and release ring are made of brass for superior flame retardancy and spatter resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · The release ring made of brass offers excellent flame retardancy and spatter resistance.
  · The type with a cover prevents dust and spatter from getting through to the fittings' internals.
  · An optional spatter cover that shuts out fine sparks.
  · By placing a separately sold release ring cover (CS), sparks that penetrate through the gap between the release ring and the tube cannot get close

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  for Sputtering Resistance, Tube Fitting Brass, Bulkhead Union, No Cover

  Nihon Pisco

  [Features]
  · Superior in Flame-Retardant and Spatter-Proof by its Brass Made Release-Ring.
  · Avoids Spatter and Dusts by Optional Protective Cover.
  · HNBR or FKM for Seal Rubber Selection

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Corrosion-Proof SUS304 Fitting Union Elbow

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	14 Days or more

• 

  for Corrosion Resistance, SUS304 Fitting, Union Straight

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance, SUS304 Fitting, Union Y

  Nihon Pisco

  [Features]
  · This tube fitting serves best where strength is required or the atmosphere contains chemicals.
  · Seal material is made of FKM.
  · Metal unit is made of SUS304.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Tee

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and when used in a corrosive atmosphere.
  · Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
  · Copper based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for Corrosion Resistance Corrosion Resistant SUS303 Equivalent Fitting Union Y

  Nihon Pisco

  No copper-based metal used. Also optimal for low-concentration ozone measures.
  
  [Features]
  · Perfect when additional strength is required and used in a corrosive atmosphere.
  · Metal body uses special stainless steel with corrosion resistance equivalent to SUS303 (Cr19 – 21%, Mo1.5 – 2.5% stainless).
  · Copper-based metal is not used.
  · HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	13 Days or more

• 

  for Chemicals, Tube Fitting Chemical Type Union Straight

  Nihon Pisco

  PPS is used for the main body material for excellent heat resistance, flame retardancy, and chemical resistance.
  
  [Features]
  · PPS is used for the main body material for excellent heat resistance, flame retardancy (UL94V-0), and chemical resistance.
  · FKM is a use option for the seal. Other options include NBR and EPDM.
  · None of the parts used must be exposed to grease.
  · Also compliant with the Food Sanitation Law of Japan (FKM type only).
  · No need to worry about rust or metal ions.
  · Two packaging specifications are available to suit the application, normal packaging and clean room packaging.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Union A for General Piping

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Tube Fitting Union Elbow for General Piping

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Various products available.
  · Can change the take-off angle of the resin body after mounting.
  · Centralized piping is enabled.
  · Light gray types, and clean room packaged types optionally available.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Tube Fitting Partition Union Elbow for Standard Pipe

  Nihon Pisco

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	9 Days or more

• 

  for General Piping, Tube Fitting Bulkhead Union P

  Nihon Pisco

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Various products available.
  · Can change the take-off angle of the resin body after mounting.
  · Centralized piping is enabled.
  · Light gray types, and clean room packaged types optionally available.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is package in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  for General Piping, Tube Fitting Mini-Type Union Tee

  Nihon Pisco

  [Features]
  · Ultra-small one-touch fitting for general pneumatic pipes.
  · Reduced size with a volume ratio of 40% over the standard type.
  · Elliptical release ring allows easy tube release.
  · The φ1.8 mm type is an industry-first minimum one-touch type.
  · Optimum for piping of small actuators and the like.
  · Light gray types, and clean room packaged types are available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	Same day or more

  Show Stock Products

Loading...