Osaka Sanitary Sanitary Fittings（Metal Piece(Fittings etc.,) Material：316L Stainless Steel）

• 

  Ferrule - Weld-on, CLF2-W Series, Sanitary Fittings

  Osaka Sanitary

  A sanitary rule that is compliant with ISO standards. Made in Japan.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Reducer - Ferrule, RDC-2C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan with inside/outside 320 - 400 buff polishing
  
  [Features]
  · Extremely small liquid penetration, dramatically reduces gasket aromatization.
  · Optimal for incorporating HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra clean processes.
  · Retains rubberized properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
  · Can be used with most chemical liquids where conventional rubber is difficult to use.
  · Can be used for the following types of chemical liquids without any issues.
  · Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Elbow - 90 Degree, Ferrule, Weld-on, EL-C-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan—polished inside/outside (#320–400)
  
  [Features]
  · Extremely low fluid penetration, which dramatically reduces gasket odor.
  · Optimally suited when introducing hazard analysis and critical control points (HACCP).
  · Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
  · The rubber properties are retained even at high temperatures.
  · Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
  · Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following chemical solutions without any problems.
  · E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Elbow - 90 Degree, Ferrule, EL-2C Series, Sanitary Fittings

  Osaka Sanitary

  Convenient ferrule elbow for sanitary use
  
  [Features]
  · Secure seal at pipe connections.
  · Hygienic, with zero fluid contamination.
  · Highly durable against freezing and impacts.
  · Features excellent workability and enables efficient piping.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Socket - Threaded, Ferrule, THSC-C Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Ferrule - CLF3-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan, ISO Standard Compliant

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Cross - Ferrule, CROS-4C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing

  • Volume Discount

  Days to Ship:	59 Days or more

• 

  Ferrule - Different Diameters, CLF-WX Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan Compliant with ISO stan.ards.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Ferrule - Eccentric Diameters, CLF-WXE Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan; ISO standard compliant.

  • Volume Discount

  Days to Ship:	16 Days or more

• 

  Elbow - 45 Degree, 45EL-2C Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	15 Days or more

• 

  Adapter - Hose Barb, Ferrule, HSAD-C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan, inside/outside 320-400 buff polishing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Tee - Hose, Ferrule, TEEV-3C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Reducer - Ferrule, Eccentric Diameters, RDE-2C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Adapter - Threaded, Ferrule, THAD-C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan Internal/External #320–#400 Polishing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Bend - 180 Degree, Weld-on, 18BND-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan, inside/outside 320-400 buff polishing

  • Volume Discount

  Days to Ship:	16 Days or more

• 

  Tee - Weld-on, TEE-W Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	15 Days or more

• 

  Sleeve - Threaded, Weld-on, MAL-W Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Tee - Low Neck, Weld-on, TEEV-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Reducer - Eccentric Diameters, Weld-on, RDE-W Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Adapter - Threaded, Weld-on, THAS-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Elbow - 45 Degree, Ferrule, Weld-on, 45EL-C-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Cap - RC Thread, Ferrule, Weld-on, CLF-BRC Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan—polished inside/outside (#320–400)
  
  [Features]
  · Extremely low liquid penetration, which dramatically reduces gasket odor.
  · Optimally suited when introducing hazard analysis and critical control points (HACCP).
  · Extracts from the material are extremely low, making it optimally suited to ultra-clean processes.
  · The rubber properties are retained even at high temperatures.
  · Can be sealed sufficiently even in steam plumbing lines (operating temperature: ≤ 145°C).
  · Superior sealing properties at high temperatures. Therefore, it is also suitable for aseptic lines and systems.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following chemical solutions without any problems.
  · E.g. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, and nitric acid, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Tee - TEE-3C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan with inside/outside 320 - 400 buff polishing
  
  [Features]
  · Extremely small liquid penetration, dramatically reduces gasket aromatization.
  · Optimal for incorporating HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra clean processes.
  · Retains rubberized properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · Features excellent sealing properties at high temperatures and also suitable for aseptic lines and aseptic systems.
  · Can be used with most chemical liquids where conventional rubber is difficult to use.
  · Can be used for the following types of chemical liquids without any issues.
  · Ex. sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Tee - Ferrule, Different Diameters, TEEX-3C Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Adapter - Hose, Ferrule, Different Diameters, HSAD-CX Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Extremely low liquid penetration, dramatically reduces gasket aromatization.
  · Optimal at the time of introducing HACCP.
  · Only a small amount of material is extracted, making it appropriate for ultra-clean processes.
  · Retains the rubber properties even at high temperature.
  · Can be sealed sufficiently even in a vapor line (operating temperature: 145°C or less).
  · With excellent sealing properties at high temperatures, also suitable for aseptic line and aseptic system.
  · Can be used with most drug solutions where conventional rubber was difficult to use.
  · Can be used for the following types of drug solutions without any problems.
  · Sodium hydroxide, sodium hypochlorite, hydrogen peroxide solution, peracetic acid, nitric acid, etc.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Liner Cap - LNRB Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan, inside/outside 320-400 buff polishing

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Elbow - 45 Degree, Weld-on, 45EL-W Series, Sanitary Fittings

  Osaka Sanitary

  [Features]
  · Made in Japan with internal & external 320 ~ 400# polishing

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	15 Days or more

• 

  Elbow - 90 Degree, Weld-on, 90EL-W Series, Sanitary Fittings

  Osaka Sanitary

  Sanitary elbows compliant with ISO standards

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  Adapter - Hose, Weld-on, HSAD-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Sanitary pipe (1.0 S to 4.0S) is compliant with JIS-G3447 standards on stainless copper sanitary pipe. Union types are typically manufactured in accordance with ISO standards.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Reducer - Weld-on, RDC-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · Sanitary pipe (1.0 S to 4.0S) is compliant with JIS-G3447 standards on stainless copper sanitary pipe. Union types are typically manufactured in accordance with ISO standards.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Sleeve - Threaded, Weld-on, MAL2-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan inside/outside 320–400 buff polishing
  
  [Features]
  · ISO standard screw union fittings are unions that take advantage of ACME screws.
  · The union type has a structure in which the pipe inner face matches the seal face when tightened.
  · The welded type screw union is joined to the sanitary pipe by argon arc TIG welding.
  · The inner and outer diameters of the weld parts comply with JIS-G3447 Stainless Copper Sanitary Pipe Dimensions.
  · Expandable type screw unions are designed to fit by expanding the pipes using tube expanders.
  ▪ Welding type: 1.0 MPa or less, expandable type: 0.2 MPa or less

  • Volume Discount

  Days to Ship:	12 Days or more

• 

  Tee - Different Diameters, Weld-on, TEEX-W Series, Sanitary Fittings

  Osaka Sanitary

  Made in Japan with inside/outside 320 - 400 buff polishing
  
  [Features]
  · Sanitary piping (1.0 S to 4.0S) is compliant with JIS-G3447 standards for stainless copper sanitary piping. Unions are by default manufactured in accordance with ISO standards.

  • Volume Discount

  Days to Ship:	15 Days or more

• 

  Cap - Ferrule, CLF-B Series, Sanitary Fittings

  Osaka Sanitary

  Convenient and hygienic ferrule caps.

  • Volume Discount

  Days to Ship:	8 Days or more

Loading...