(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Screw Pin Gauges - Threaded, Stainless Steel, Long, RA
NIIGATASEIKI
•Product Model: Screw Pin Gauge
•Feature: · Thread changes to 1/15 taper thread in the middle so that the unit can be fixed on a workpiece with a taper screw. · Exceptional for taking measurements at locations that could not be handled using conventional screw plug gauges, where "
•Material: Stainless steel (SUS303)
Days to Ship: | 8 Days or more |
---|
Thread Plug Gauges - Limit Screw Plug Set for Testing
NIIGATASEIKI
•Product Model: Thread Plug Gauge
•Work: Threaded
•Material: Gauge Part: Alloy Tool Steel, Shank Part: Aluminum
Days to Ship: | 8 Days or more |
---|
Screw Pin Gauges - Threaded, Stainless Steel, THP
NIIGATASEIKI
•Product Model: Screw Pin Gauge
•Feature: · Detached in short time using simple tools. · Zero seek using threaded holes, difficult in the past, can now be performed. · Measurement is now cheaper, faster and more accurate than in the past. · Rust resistant stainless steel. · Highly
•Accuracy: · Vibration at measurement section and thread section: 0.01 mm or lower · Measurement section (a dimensions) Accuracy: ±0.005 mm or lower · Thread section: JIS Class 2 Equivalent Product
•Material: Stainless Steel
Days to Ship: | 8 Days or more |
---|
Limit Plug Gauges - Slim Handle Stopper, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Class: H7
•Feature: Enables inspection of deep holes that can not be inspected with a plug gauge because the handle is thinner than the hole gauge part
•Material: Gauge Part: Alloy Tool Steel, Shank Part: Stainless Steel
Days to Ship: | 8 Days or more |
---|
Limit Plug Gauges - for Manufacturing, H7, LP-H
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Class: H7
•Hardness: HV660~780
•Feature: A pair of gauges, with external dimensions based on the maximum allowable dimension and the minimum allowable dimension as references, for obtaining fit compatibility between the hole and the shaft
•Application: Hole Diameter Inspection
Days to Ship: | 8 Days or more |
---|
Limit Plug Gauges - for Manufacturing, H7, SPG-H
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Class: H7
•Application: Hole Diameter Inspection
•Material: Body: Aluminum / Gauge: Steel
Days to Ship: | 8 Days or more |
---|
Limit Plug Gauges - Carbide Bound Plug, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Feature: · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance an
•Application: Hole Diameter Inspection
•Material: Gauge Part: Cemented Carbide, Shank Part: Aluminum
Days to Ship: | 9 Days or more |
---|
Limit Plug Gauges - Ceramic Limited Stopper, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Feature: · A pair of gauges with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Features exceptional abrasion resistance in
•Application: Hole Diameter Inspection
•Material: Gauge Part: Ceramic, Shank Part: Aluminum
Days to Ship: | 48 Days or more |
---|
Limit Plug Gauges - Carbide Step Limit Plug, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Feature: · A gauge with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Since the unit has been prepared with measurements f
•Application: Hole Diameter Inspection
•Material: Gauge Part: Cemented Carbide, Shank Part: Aluminum
Days to Ship: | 10 Days or more |
---|
Limit Plug Gauges - Ceramic Step Limit Plug, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Feature: · A gauge with an external shape design based on maximum tolerance measurements and minimum tolerance measurements in order to achieve compatibility for engagement of slots and shafts. · Since the unit has been prepared with measurements f
•Application: Hole Diameter Inspection
•Material: Gauge Part: Ceramic, Shank Part: Aluminum
Days to Ship: | 49 Days or more |
---|
Limit Plug Gauges - Carbide Bound Plug for Machining, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Tolerance Class: H7
•Application: Hole Diameter Inspection
•Material: Body: Aluminum / Gauge: Cemented Carbide
Days to Ship: | 10 Days or more |
---|
Limit Plug Gauges - Ceramic Limited Plug for Construction Work, H7
NIIGATASEIKI
•Product Model: Limit Plug Gauge
•Tolerance Class: H7
•Application: Hole Diameter Inspection
•Material: Body: Aluminum / Gauge: Ceramics
Days to Ship: | 10 Days or more |
---|
Tool Prestressing Gauges - Limit Screw Ring Set for Testing
NIIGATASEIKI
•Product Model: Tool Prestressing Gauge
•Work: Tapped
•Material: Alloy tool steel
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Product Model |
Nominal |
Pitch P |
Work |
Class |
Specifications |
Brand | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI | NIIGATASEIKI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Limit Plug Gauges - Ceramic Limited Plug for Construction Work, H7 | ||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 48 Days or more | 10 Days or more | 49 Days or more | 10 Days or more | 10 Days or more | 8 Days or more |
Product Model | Screw Pin Gauge | Thread Plug Gauge | Screw Pin Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Limit Plug Gauge | Tool Prestressing Gauge |
Nominal | M1 ~ M18 | M1.4 ~ M20 | M2 ~ M18 | φ3 ~ φ20 | φ3 ~ φ40 | φ3 ~ φ20 | φ10 ~ φ30 | φ10 ~ φ30 | φ10 ~ φ30 | φ10 ~ φ30 | φ3 ~ φ20 | φ3 ~ φ10 | M2 ~ M20 |
Pitch P | 0.25 ~ 1.75 | 0.3 ~ 2.5 | 0.4 ~ 2.5 | - | - | - | - | - | - | - | - | - | 0.4 ~ 2.5 |
Work | - | Threaded | - | - | - | - | - | - | - | - | - | - | Tapped |
Class | - | - | - | H7 | H7 | H7 | - | - | - | - | - | - | - |
Specifications | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy