NAKAMURASEISAKU Vernier Calipers

• 

  Centerline Caliper - Vernier, Round Hole Pitch, RM-DX

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch between holes of the same diameter.
  · Capable of measuring pitches "between 2 equal-diameter holes" and from end surface to hole

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Standard Model, M-60P

  NAKAMURASEISAKU

  [Features]
  · Standard vernier calipers for regular measurements.
  · Lightweight calipers which, despite a long measurement length, can be held comfortably in one hand.
  · Reasonably priced too

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Curre Jaw Type, Stainless Steel, RA

  NAKAMURASEISAKU

  [Features]
  · Made of stainless steel (SUS420J2).
  · Ideal for measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in pockets.
  [Applications]
  · For measurements of workpieces that cannot be measured with straight jaws, such as outside measurements of dimples and internal measurements in deep pockets.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Long Jaw Type for Large Diameters, LSM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring diameters for spheres, pipes, etc.
  · Ideal for diameter measurement of large bore pipes, etc.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Digital Caliper - Internal Measurement, Long Jaw Type, E-ICM-J

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · A digital direct reading type

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Fine Adjustment, Long Jaw Type, SCML

  NAKAMURASEISAKU

  [Features]
  · Reads the inside and outside measurement with high precision.
  · "Fine feed" provides high accuracy.
  · Vernier calibers that come in a vast variety of sizes.
  · Long jaw-type SCM

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Digital Caliper - Standard, Flat Head, E-PITA

  NAKAMURASEISAKU

  •Model: Standard Calipers
  •Display Method: Digital
  •Impermeability: Not Included
  •With / Without measurement data output terminal: Not Included
  •Solar Panel: Not Included

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Standard, Flat Head, PITA

  NAKAMURASEISAKU

  [Features]
  · 21st century standard calipers, Pita calipers.
  · "Flat head" enables easy measurement from any corner.
  · PITA15: The main scale grooves on the top and bottom scales reduce diffuse reflection on the surface with the scale markings.
  · Because the green color is easy on the eyes, they don't get tired.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Digital Caliper - Judgment Function, ULJ

  NAKAMURASEISAKU

  [Features]
  · "Judgment function" allows pass/fail to be determined instantly.
  · When dividing go/no-go products for mass production parts, work time can be significantly reduced.
  · By setting the acceptance criteria for the measured workpiece in advance, the OK/NG display can be checked instantaneously on the panel.
  · Anyone can make measurements, simply and quickly.
  · The flat head tip perfectly contacts complex shapes that had been difficult to measure with conventional calipers, allowing end face measurement without stress

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Dial Caliper - Shock Resistant, DMK-J

  NAKAMURASEISAKU

  [Features]
  · Rack and pinion type caliper.
  · The improved shock resistance allows use with no concerns.
  · Pointer needle 1 revolution 1 mm.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · Used for on-site measurements of precision machining.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  [Kanon] Centerline Caliper E-RX

  NAKAMURASEISAKU

  [Features]
  · The pitch of circular holes can be measured by direct reading.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For measuring at various machining sites.

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Centerline Caliper - Digital, Round Hole Pitch, E-RM-J

  NAKAMURASEISAKU

  •Model: Special Calipers
  •Special-shaped Caliper: Hole Pitch Calipers
  •Display Method: Digital
  •Depth Bar W/WO: Not Included
  •Impermeability: Not Included

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Centerline Caliper - Vernier, Offset Type, RM-2

  NAKAMURASEISAKU

  [Features]
  · Ideal for pitch measurement of holes with different diameters.
  · Round hole pitch calipers of “offset type," with main scale probe moving vertically.
  · Since the measuring element of the main scale moves vertically, it possible to measure not only same-diameter holes but also the pitch between different diameter holes.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Centerline Caliper - Vernier, Small Diameter Type, RM-S

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring the pitch of small diameter holes.
  · Round-hole pitch calipers ideal for measuring "small-diameter holes and narrow pitch"

  • Volume Discount

  Days to Ship:	25 Days or more

• 

  Vernier Caliper - Standard Model, Short/Long Range, SM

  NAKAMURASEISAKU

  Mini Calipers and Standard Long Calipers
  
  [Features]
  · Standard vernier calipers for regular measurements.
  · Standard scale type calipers with "green lines" that don't tire the eyes

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Vernier Caliper - Standard Model, Long Range, M

  NAKAMURASEISAKU

  Standard vernier calipers for regular measurements

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Long Jaw Type for Narrow Spaces, ROBA

  NAKAMURASEISAKU

  [Features]
  · The length of the inside and outside jaws is larger than that of the standard product.
  · Made of stainless steel (SUS420J2).
  [Applications]
  · For internal/external measurements in narrow/deep places.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Vernier Caliper - Internal Measurement, Long Jaw Type, ICM

  NAKAMURASEISAKU

  [Features]
  · Ideal for internal measurements in deep places.
  · Inside calipers with a "long-narrow jaw" ideal for inner depth measurements.
  · Long and thin jaw is ideal for internal measurements in deep holes.
  · The jaw length is available in two types, 56 mm and 76 mm

  • Volume Discount

  Days to Ship:	16 Days or more

• 

  Vernier Caliper - Short Jaw Type, SBM

  NAKAMURASEISAKU

  [Features]
  · Ideal for measuring machining steps within holes.
  · "Short-leg jaw" is shaped to make measuring the stepped sections in holes easier.
  · Has a short jaw ideal for measurement for deep hole groove processing

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Digital Caliper - Standard Model, E-PEAK

  NAKAMURASEISAKU

  [Features]
  · Evolution of calipers (leading to reduced measurement time and labor saving).
  · Automatically retains the maximum and minimum values.
  · The maximum value mode (Max) is useful for measuring inner diameters. The E-PEAK calipers automatically hold the maximum value of the inner diameter.
  · Minimum value mode is convenient for outer diameter measurements in hard-to-see places. E-PEAK calipers automatically maintain the minimum value of the outer diameter.

  • Volume Discount

  Days to Ship:	10 Days or more

Loading...