(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Nachi-Fujikoshi
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
· Drill for dry machining.
Days to Ship: | Same day or more |
---|
Show Stock Products
Nachi-Fujikoshi
A general-purpose drill used in the widest ranges of applications.
[Features]
· Blister packed.
· Corresponds to the JIS standard.
· A small packaged item in one-piece units (contains 2 pieces for diameters less than 4.0 mm).
[Applications]
· It can be used in various situations.
Days to Ship: | 9 Days or more |
---|
Nachi-Fujikoshi
A long ironworking drill wrapped in a blister pack.
[Features]
· It supports various drilling depths, so drills can be selected from an abundant choice of sizes (groove length, full length).
· A generic type used in the widest ranges of applications.
[Applications]
· Ideal for iron/steel.
Days to Ship: | 12 Days or more |
---|
SDSET25 Ironworking Drill, Set of 25
Nachi-Fujikoshi
A general-purpose drill used in the widest ranges of applications.
[Features]
· Corresponds to the JIS standard.
· A set of 25 pieces with diameters ranging from 1.0 to 13.0 mm and pitch of 0.5 mm.
[Applications]
· It can be used for many purposes.
Days to Ship: | Same day |
---|
Show Stock Products
Drill Bit Sets - 50 Piece Ironworking Set, SET50
Nachi-Fujikoshi
A general-purpose drill used in the widest ranges of applications.
Days to Ship: | 8 Days or more |
---|
Drill Bit Sets - 10 Piece G Coated Set, GSDSET10【10 Pieces Per Package】
Nachi-Fujikoshi
General purpose coated drill.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
· A set of 10 pieces with diameters ranging from 2.0 to 6.0 mm.
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel and aluminum.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - SG-ESR Drill Bit, SGESR
Nachi-Fujikoshi
High-grade powdered high-speed steel and SG coating realizes the longest life possible for this HSS drill.
[Features]
· It is a high general-purpose drill for a wide range of work materials, from steel and stainless steel to aluminum.
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
· Enables high precision drilling.
Days to Ship: | 8 Days or more |
---|
SDXJP Ironworking Drill (with Thinning)
Nachi-Fujikoshi
A blister packaged general-purpose drill which is used in the widest range of applications.
[Features]
· A standard drill that corresponds to the JIS standard.
· A small packaged item in one-piece units (contains 2 pieces for diameters less than φ4.0 (4.0 mm)).
[Applications]
· Comes with thinning and has good bite.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D
Nachi-Fujikoshi
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D
Nachi-Fujikoshi
[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 10 times the drill diameter.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 30D, AQDEXOH30D
Nachi-Fujikoshi
[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 30 times the drill diameter.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, with Oil Hole, 3D, AQDEXOH3F3D
Nachi-Fujikoshi
[Features]
· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.
· Capable of highly-efficient hole drilling up to 3 times the drill diameter.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, with Oil Hole, 10D, AQDEXOH3F10D
Nachi-Fujikoshi
[Features]
· 3-flute cutting edge with excellent cutting balance ideal for high-precision machining.
· Capable of highly-efficient hole drilling up to 10 times the drill diameter.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, AQDEX3FR, Regular
Nachi-Fujikoshi
[Features]
· Uses 3-flute cutting edge with excellent cutting balance.
· Realizes high precision hole processing that is even possible without a reamer.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Starting Type, AQDEXST
Nachi-Fujikoshi
[Features]
· Highly accurate positioning is possible with good bite.
· A multi-function type capable of centering, chamfering and V-grooving.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiCN Coated, SG Flat Drill Bit, SGEZ
Nachi-Fujikoshi
[Features]
· Multifunctional large diameter flat drill used for counterboring on inclined surfaces, tap blind holes, etc.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, AG Power Drill Bit, AGPSD
Nachi-Fujikoshi
[Features]
· Capable of high-efficiency machining on steel and cast iron.
· Allows non-step boring up to hole depth 5D.
· Cannot be used for austenitic stainless steel.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, G Straight Drill Bit, GLD, Long
Nachi-Fujikoshi
[Features]
· It is a coating long drill suitable for deep-hole and deep-positioning drilling in steel, stainless steel, and aluminum.
Days to Ship: | 10 Days or more |
---|
HSS Taper Shank Drill Bits - G Shank Drills, GLTD, Long
Nachi-Fujikoshi
[Features]
· It is a coating long drill suitable for steel, stainless steel, and aluminum.
Days to Ship: | 10 Days or more |
---|
Aqua Drill EX Power Feed 2D PF2D
Nachi-Fujikoshi
[Features]
· A 2D drill bit that realizes high accuracy, long life machining with ultra-high feed machining with machining centers or lathes that can easily become clogged with scrap.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Hole Diameter (Drilling Diameter) D(mm) |
Groove Length (ℓ)(mm) |
Work Material |
Tool Material Type |
Overall Length (L)(mm) |
Link Model |
Coating Presence |
Coating Type |
Oil-Hole Presence |
Brand | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Drill Bit Sets - 10 Piece G Coated Set, GSDSET10【10 Pieces Per Package】 | Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 30D, AQDEXOH30D | Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, with Oil Hole, 3D, AQDEXOH3F3D | Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, with Oil Hole, 10D, AQDEXOH3F10D | Carbide Solid Drill Bits - Aqua Drill EX Bit, 3-Flute, AQDEX3FR, Regular | Carbide Solid Drill Bits - Aqua Drill EX Bit, Starting Type, AQDEXST | HSS Solid Drill Bits - Straight Shank, TiCN Coated, SG Flat Drill Bit, SGEZ | HSS Solid Drill Bits - Straight Shank, AG Power Drill Bit, AGPSD | HSS Solid Drill Bits - Straight Shank, G Straight Drill Bit, GLD, Long | |||||||||
Days to Ship |
Same day or more
Show Stock Products | 9 Days or more | 12 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 9 Days or more |
Hole Diameter (Drilling Diameter) D(mm) | 4 ~ 12.5 | 11.7 | 5 | 1 ~ 13 | 1.1 ~ 6 | 2 ~ 6 | 2 ~ 32 | 10.2 | 3 ~ 16 | 1 ~ 12 | 3 ~ 8 | 3 ~ 16 | 3 ~ 16 | 3 ~ 16 | 3 ~ 20 | 20 ~ 32 | 1 ~ 12.9 | 8.3 | 19.4 | - |
Groove Length (ℓ)(mm) | 22 ~ 51 | 109 | 120 | - | - | - | 24 ~ 185 | 98 | 2 ~ 72 | 13 ~ 156 | 99 ~ 264 | 17 ~ 80 | 39 ~ 208 | 19 ~ 96 | 9 ~ 40 | 44 ~ 68 | 12 ~ 101 | 125 | 200 | - |
Work Material | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[◎] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] | General Steel[○] |
Tool Material Type | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Carbide |
Overall Length (L)(mm) | 54 ~ 110 | - | - | - | - | - | - | - | 68 ~ 146 | 61 ~ 216 | 149 ~ 314 | 68 ~ 146 | 89 ~ 268 | 49 ~ 160 | 48 ~ 131 | 113 ~ 158 | 34 ~ 151 | 200 | 300 | - |
Link Model | End Mill Link / Straight Link | - | - | - | - | - | - | - | End Mill Link / Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Tapered Link | End Mill Link |
Coating Presence | Included | - | - | - | - | Included | - | - | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
Coating Type | Others | - | - | - | - | TiN | - | - | Others | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiCN | For General Steel (AlCrN etc.) | TiN | TiN | Others |
Oil-Hole Presence | None | - | - | - | - | - | - | - | Included | Included | Included | Included | Included | None | None | None | None | None | None | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy