While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Muromoto Tubes & Tube Accessories（Color：Green）

8 items

: 30; 45; 60

Days to Ship	All Same day 3 Days or Less 6 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 13 Days or Less 14 Days or Less

Tubing - Polyurethane, Straight, Female BSPP Fittings, UH Series

Muromoto

Can be used separately. Tube with 5-mm internal diameter x 8-mm external diameter; available cut lengths: 2 m, 3 m, 5 m, 7 m, and 10 m.

[Features]
· Breakthrough air hose with an outer diameter of just 28 mm achieved by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
· Light and easy to handle thanks to the 28 mm outer diameter (standard type).
· Thanks to the free expansion and contraction and lightweight (1/3rd rubber hose), the product is easy to grip.
· It is highly resilient, and will withstand severe repeated application of force, such as running over it with a truck.
· Abrasion resistance three to five times superior than a rubber hose.
· Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine, and benzaldehyde.
· Heat resistance: 70°C .
· Cold-resistance: Does not lose flexibility even at -10°C.
· Can withstand expansion/contraction performed at air pressure of 0.7 MPa more than 300, 000 times without any abnormalities.
· With smaller outer curling diameter and straight tubing of a constant dimension at both ends of the hose, the hose does not break even when handled roughly.
· Attractive pale green color.

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Coil, Female BSPP, GS Series

Muromoto

Use at locations that require flow rate.

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Tight Coil, Female BSPP Fittings

Muromoto

Tightly wound diameter at φ28mm. Offers a wide range of uses, including air-driven equipment. Internal diameter of tube 5, external diameter 8.

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Coil, Female BSPP Fittings, SE Series

Muromoto

This is used for general factory production lines with straight component lengthened on the manual side. Internal diameter of tube 5, external diameter of tube 8

[Features]
· Breakthrough air hose whose standard product has just φ28 mm outer diameter by winding pure urethane foam tube, taking advantage of the characteristics of thermoplastic polyurethane resin.
· Light and easy to handle thanks to φ28 mm outer diameter (standard type).
· Thanks to the free expansion and contraction and its light weight (1/3 of rubber hose), the grip operation is easy and no fatigue feeling is given to workers.
· It is highly resilient, and will not pose any problems from going through severe repeated testing that entails running over it with a truck, etc.
▪ 3 to 5 times abrasion resistance compared to rubber hose.
▪ Chemical resistance (30 days): Ideal material that can withstand almost all chemicals other than Hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, Chlorine and benzaldehyde is used.
・Heat resistance 70°C .
▪ Cold-resistance: Does not lose its flexibility even at -10°C.
▪ Can withstand expansion/contraction tests performed at an air pressure of 0.7 MPa for more than 300, 000 times without any regularities.
▪ With smaller outer curling diameter and straight wires of a constant dimensions at both ends of the hose, the hose does not break even when handled roughly.
▪ As the hose color is pale green, it is easy on the eyes

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Jumbo Coil, Female BSPP Fittings, G Series

Muromoto

Semi-braided hose with a pressure resistance capable of withstanding air pressures up to 1.5 Mpa. Suitable for gas stations and car repair shops.

[Features]
・
· Light and easy to handle thanks to φ28 mm outer diameter (standard type).
· Thanks to its ability to be freely expanded/contracted and its light weight (1/3 that of the rubber hose), grip operation is easy, helping alleviate fatigue in workers.
· It is highly resilient, and stands up, problem-free, to repeated testing, including being run-over by trucks etc.
▪ Offers 3 to 5 times the abrasion resistance of the rubber hose.
▪ Chemical resistance (30 days): Uses material able to withstand almost all chemicals except hydrochloric acid, phosphoric acid, sulfuric acid, nitric acid, caustic soda, methyl chloride, chlorine and benzaldehyde.
· Heat resistance 70°C.
▪ Cold-resistance: Does not lose its flexibility, even at -10°C.
▪ Can withstand over 300, 000 expansion/contraction tests performed at air pressures of 0.7 MPa without displaying any abnormalities.
▪ With a small outer curling diameter and straight wires with set dimensions at both ends of the hose, the hose will not break, even when handled roughly.
· Its pale green color is easy on the eyes.

Volume Discount
Days to Ship: 8 Days or more
Stretch Curl Hose, LS Type

Muromoto

The thick middle curl is highly extensible, giving it good operability when a given flow rate is necessary. Internal diameter of tube 5, external diameter 8.

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Thick Coil, CHL Series

Muromoto

Wide wound diameter at φ56mm; the coiled part can be extended up to 10 times its length, allowing a wide range of applications. Internal diameter of tube 5, external diameter 8.

Volume Discount
Days to Ship: 8 Days or more
Tubing - Polyurethane, Thick Coil, GSL Type

Muromoto

Suited for work requiring a short total length in the curled part and a large flow rate (when the flow rate of the current hose is insufficient). Tube internal diameter × external diameter = 8 × 12

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Type
Material
Cutting Service Usage
Color
O.D. [Distinction]
Applicable Fluid
O.D. D(Ø)
I.D. [Distinction]
I.D. d(Ø)
Number of Bores(per piece)
Material, Urethane
Material: Nylon
Material, Fluororesin
Operating Environment
O.D. (2nd Core)
O.D. (3rd Core)
O.D. (4th Core)
I.D. (2nd Core)
I.D. (3rd Core)
I.D. (4th Core)
Types of Related components


Brand	Muromoto	Muromoto	Muromoto	Muromoto	Muromoto	Muromoto	Muromoto	Muromoto
Product Series	Tubing - Polyurethane, Straight, Female BSPP Fittings, UH Series	Tubing - Polyurethane, Coil, Female BSPP, GS Series	Tubing - Polyurethane, Tight Coil, Female BSPP Fittings	Tubing - Polyurethane, Coil, Female BSPP Fittings, SE Series	Tubing - Polyurethane, Jumbo Coil, Female BSPP Fittings, G Series	Stretch Curl Hose, LS Type	Tubing - Polyurethane, Thick Coil, CHL Series	Tubing - Polyurethane, Thick Coil, GSL Type
Days to Ship	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more
Type	Coil	Coil	Coil	Coil	Coil	Coil	Coil	Coil
Material	Urethane	Urethane	Urethane	Urethane	Urethane	Urethane	Urethane	Urethane
Cutting Service Usage	-	-	-	-	-	-	-	-
Color	Green	Green	Green	Green	Green	Green	Green	Green
O.D. [Distinction]	~8	~10	~8	~8	~10	~8	~8	~15
Applicable Fluid	Air	Air	Air	Air	Air	Air	Air	Air
O.D. D(Ø)	8	10	8	8	10	8	8	12
I.D. [Distinction]	~5	~7	~5	~5	~7	~5	~5	~8
I.D. d(Ø)	5	6.5	5	5	6.5	5	5	8
Number of Bores(per piece)	1	1	1	1	1	1	1	1
Material, Urethane	Polyurethane	Polyurethane	Polyurethane	Polyurethane	Polyurethane	Polyurethane	Polyurethane	Polyurethane
Material: Nylon	-	-	-	-	-	-	-	-
Material, Fluororesin	-	-	-	-	-	-	-	-
Operating Environment	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance	Standard / Pressure Resistance / Heat Resistance / Abrasion Resistance / Low Temp. Resistance
O.D. (2nd Core)	-	-	-	-	-	-	-	-
O.D. (3rd Core)	-	-	-	-	-	-	-	-
O.D. (4th Core)	-	-	-	-	-	-	-	-
I.D. (2nd Core)	-	-	-	-	-	-	-	-
I.D. (3rd Core)	-	-	-	-	-	-	-	-
I.D. (4th Core)	-	-	-	-	-	-	-	-
Types of Related components	-	-	-	-	-	-	-	-

Configure

Specification/Dimensions

Type
- Straight
- Flat
- Coil
- (Related Components) Tube Cutters
- Related Components
Images

Clear

Material
- Urethane
- Nylon
- Fluororesin
- Polyamide
- Fluororubber
- Silicon Rubber
- Polyolefin Resin
- Others
- PVC
- Polypropylene
Clear

Cutting Service Usage
- Yes
- No
Clear

Color
- Black
- White
- Translucent White
- Transparent (including non-white colors)
- Red
- Blue
- Yellow
- Green
- Orange
- Ocher
- Gray
- Multi Color
- Pink
- Others
- Brown
- Purple
- Silver
- Transparent Blue
Clear

O.D. [Distinction]
~2

~3

~4

~5

~6

~7

~8

~9

~10

~15

~20

~30
* ~2 represents over 5, and 3 or less.
Clear

Applicable Fluid
- Water
- Air
- Chemical
- General Hydraulic Oil
- Thermal Media Oil
Clear

Metric / Inch
- metric
Clear

O.D. D(Ø)
0.090"

1/8"

5/32"

3/16"

0.205"

7/32"

1/4"

0.256"

5/16"

0.319"

3/8"

7/16"

0.441"

1/2"

17/32"

9/16"

0.579"

5/8"

11/16"

3/4"

13/16"

7/8"

1"

1-1/8"

1-1/4"

1-3/8"

1-1/2"

1-3/4"

2"

2-1/2"

3"

3-1/2"

1.6

1.7

1.8

10

10.2

10mm

11

11mm

12

12.2

12.5

12.7

12mm

13

13.5

13.5mm

13mm

14

14.2

14mm

15

16

16mm

17

18

18mm

2

2.5

20

22

23

24

25

25.4

26

28

29

3

3.17

3.18

3.2

3.5

34

35

4

4.5

4.76

42

47

48

4mm

5

5.95

52

57

5mm

6

6.35

62

7

7.6

7.85

7.94

7mm

8

8.2

8mm

9

9.53

9mm
Clear

I.D. [Distinction]
1 or Less

~2

~3

~4

~5

~6

~7

~8

~9

~10

~15

~20

~30
* ~2 represents over 5, and 3 or less.
Clear

I.D. d(Ø)
1/16"

0.066"

0.079"

0.092"

3/32"

1/8"

0.126"

0.170"

3/16"

0.189"

1/4"

0.251"

0.252"

5/16"

0.374"

3/8"

0.376"

0.441"

1/2"

0.500"

0.566"

5/8"

3/4"

1"

1-1/4"

1-1/2"

2"

2-1/2"

3"

0.7

0.8

0.9

1

1.2

1.5

1.58

1.59

1.6

10

10.7

10mm

11

12

12.5

12.8

12mm

13

15

16

18

19

2

2.25

2.36

2.42

2.5

2.7

2.99

20

22.2

25

2mm

3

3.17

3.21

3.48

3.5

3.95

3.96

30

32

35

38

3mm

4

4.02

4.15

4.35

4.5

4.57

4.76

4.81

40

45

4mm

5

5.5

5.90

5.99

50

5mm

6

6.3

6.33

6.35

6.4

6.5

6.8

6.99

6mm

7

7.5

8

8.3

8.5

8mm

9

9.5

9.56

9mm
Clear

Number of Bores(per piece)
1

2

3

4

5

6

7

8

9

10

12
Clear

Material, Urethane
- Polyurethane
- Soft Polyurethane
- Conductive, Antistatic Urethane
- Multi-Core Type Polyurethane
- Soft Polyurethane
- Incombustible Polyurethane
- Water Resistant Polyurethane
Clear

Material: Nylon
- Soft Nylon
- Pressure Resistant Nylon
- Nylon 12
- Nylon (Polyamide)
- Others
Clear

Material, Fluororesin
- Soft Fluororesin
- Standard Fluororesin
- Others
Clear

Operating Environment
- Standard
- Clean Environment
- Corrosion Resistant
- Antistatic
- Sputter Resistant
- Mold Cooling
- Water Resistance
- Pressure Resistance
- For Vacuum
- Heat Resistance
- Abrasion Resistance
- Oil Resistance
- Low Temp. Resistance
- Weather Resistance
- Chemical Resistance
Clear

O.D. (2nd Core)
4

6

8
Clear

O.D. (3rd Core)
4

6

8
Clear

O.D. (4th Core)
4
Clear

I.D. (2nd Core)
2.5

4

5
Clear

I.D. (3rd Core)
2.5

4

5
Clear

I.D. (4th Core)
2.5
Clear

Types of Related components
- Tube Cutter
- Tube Cutter Replacement Blade
- Tool for Peeling
- Tube Reel
- Bracket
- members for completion
- Insert
- Sleeve
- Fitting
Clear

Narrow search by specifying Manufacturer

- MISUMI (1)
- C-Value ()
- Chiyoda (11)
- Muromoto (8)
- Nitta (8)
- SMC (8)
- Junkosha (4)
- Nihon Pisco (3)
- Miruc Optical (0)
- I.Field (0)
- Chukoh Chemical Industries (0)
- Trusco Nakayama (0)
- CKD (0)
- Nichias (0)
- Iwata Manufacturing (0)
- USA Industrials (0)
Clear

CAD

- 2D
- 3D
Clear

Application example related to this category

back next

Related Categories to Tubes & Tube Accessories

- Tubes & Tube Accessories

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Muromoto Tubes & Tube Accessories（Color：Green）

Configure

Specification/Dimensions

Type

Material

Cutting Service Usage

Color

O.D. [Distinction]

Applicable Fluid

Metric / Inch

O.D. D(Ø)

I.D. [Distinction]

I.D. d(Ø)

Number of Bores(per piece)

Material, Urethane

Material: Nylon

Material, Fluororesin

Operating Environment

O.D. (2nd Core)

O.D. (3rd Core)

O.D. (4th Core)

I.D. (2nd Core)

I.D. (3rd Core)

I.D. (4th Core)

Types of Related components

Narrow search by specifying Manufacturer

CAD

Application example related to this category

Related Categories to Tubes & Tube Accessories

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)