(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Cam Followers - Head with hexagon wrench socket, flat.
MISUMI
Cam follower outer diameter is flat, configurations available for general, high load or low particle emission applications. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Hexagon socket for head and shank, flat.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
Days to Ship: | Same day or more |
---|
Show Stock Products
MISUMI
•Shaft: Provided
•Roller Type: Cylindrical Outer Ring
•Category: Cam Followers
•Tightening Method: Hex Socket on Head
•Unit: Metric Series
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Straight slot, crowned.
MISUMI
They can be configured for a general application or for an application where low particulate emission is required (clean room). Options with or without seals. Outer diameters selectable in sizes from 13 to 35mm. Available in 52100 bearing steel or 440C stainless steel. Crowned type roller. Roller guiding method: retainer type.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Head with hexagon wrench socket, crowned.
MISUMI
Configurable carbon steel or stainless steel nuts. Options with or without seals. Configurations available for general, high load or low particulate applications. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Threaded for grease fittings, flat.
MISUMI
The outer diameter of the cam follower is flat. The thread for the grease fitting can be M6 or BSPT 1/8. The material is 52100 bearing steel. The outer diameter is crowned and can be configured in sizes from 16 to 52mm. The nut to secure it is carbon steel. The grease fitting can be included, configured by alterations.
Days to Ship: | 8 Days or more |
---|
Cam Followers - Hexagon socket wrench head and shank, crowned.
MISUMI
Hex socket and grease fittings are mounted on both the head and thread part. They can be secured from either head or thread side. Greasing is enabled from both directions.
Days to Ship: | Same day or more |
---|
Show Stock Products
MISUMI
The outer ring has a resin coating (Nylon MC). The outer ring can be flat or crowned. Tightening method can be flat or with hexagon keyway. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
Days to Ship: | 8 Days or more |
---|
Cam Followers - Threaded for grease fittings, crowned.
MISUMI
Tapped holes for grease fittings are provided. Installation is simple.
Days to Ship: | 8 Days or more |
---|
Roller Followers - Separate, Cylindrical.
MISUMI
The shape of the outer ring is cylindrical. This series of rollers does not have a rod. Outer ring, inner ring and retainer can be separated. Options with or without seals. Maximum operating temperatures of 80°C. Roller follower material available in 52100 bearing steel or 440C stainless steel. Outer diameters configurable in sizes from 19mm to 47mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Straight groove, flat.
MISUMI
The outer diameter of the cam follower is flat. They can be configured for a general application or for an application where low particle emission is required (clean room). Available in 52100 bearing steel or 440C stainless steel. Cylindrical outer ring type roller. Roller guiding method: retainer type. Options with or without seals.
Days to Ship: | Same day or more |
---|
Show Stock Products
MISUMI
This guide follower contains integrated ball bearings. Internal parts are 52100 bearing steel, external parts are stainless steel. The nut is stainless steel. The outer diameter of the follower is 10, 12, 13, 16 or 19mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Followers of Leva - Resin, crowned.
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
Days to Ship: | 8 Days or more |
---|
Roller Followers - Separate, urethane coated, flat.
MISUMI
This type of roller follower does not have a stem. The urethane is baked onto the outer ring of the roller follower. The shape of the outer ring is flat. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C. Urethane has a shore hardness of A90.
Days to Ship: | Same day or more |
---|
Show Stock Products
MISUMI
•Roller Type: Crowned Type
•Category: Roller Follower
•Roller Follower Type: Non-Separate
•Roller Guiding Method: Retainer Type
•Inner Ring: Provided
Days to Ship: | Same day or more |
---|
Show Stock Products
Pins for Cam Followers - With retaining ring.
MISUMI
•Category: Roller Follower Pin
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 12 Days or more |
---|
Eccentric Cam Followers - For hex wrench, crowned.
MISUMI
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine adjust the position by turning the stem during assembly. Available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
Days to Ship: | 8 Days or more |
---|
Roller Followers - Separate, urethane coated, type R.
MISUMI
This type of roller follower does not have a stem. The urethane is baked onto the outer ring of the roller follower. Roller follower material available in 52100 bearing steel. Urethane is A90 shore hardness. Options with or without seals. Maximum operating temperatures of 80°C.
Days to Ship: | 8 Days or more |
---|
Roller Trackers - Solid, urethane coated, flat.
MISUMI
The parts of this roller follower cannot be separated. The shape of the outer ring is flat. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C. Urethane has a shore hardness of A90. Urethane is baked to the outer ring of the roller follower.
Days to Ship: | Same day or more |
---|
Show Stock Products
Pins for Cam Followers - Threaded.
MISUMI
•Category: Roller Follower Pin
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - With urethane roller, crowned or flat.
MISUMI
Clamping method with flat groove. The outer diameter of the roller can be configured as crowned or flat. Options with or without seals. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - With urethane roller, crowned or flat, hexagonal wrench fastening.
MISUMI
Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Configurable carbon steel or stainless steel nuts. Maximum operating temperatures of 80°C. Outer ring coating urethane can be configured to A90 or A50 Shore hardness.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Resin, with retainer.
MISUMI
After MC Nylon Resin is press-fit into the outer ring of Cam Follower - Hex Socket, the sleeve is retained by retaining ring.
Days to Ship: | 8 Days or more |
---|
Supports for Cam Follower - L Shape.
MISUMI
•Category: Cam Followers
For complete product overview and details on L-Shaped Brackets for Cam Followers see the sections below:
Days to Ship: | 10 Days or more |
---|
Supports for Cam Follower - Block.
MISUMI
•Category: Cam Followers
For complete product overview and details on Block Brackets for Cam Followers see the sections below:
Days to Ship: | 10 Days or more |
---|
MISUMI
MC Nylon Resin is press-fit into the outer ring of Cam Follower - With Hex Socket.
Days to Ship: | 8 Days or more |
---|
Cam Followers - Urethane coated, flat keyway, crowned.
MISUMI
Urethane has a shore hardness of A90. Flat wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Options with or without seals. Maximum operating temperatures of 80°C. Grease hole located in head. Outer ring type: Crowned.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers - Urethane coated, flat keyway, flat.
MISUMI
Urethane has a shore hardness of A90. Flat wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Options with or without seals. Maximum operating temperatures of 80°C. Grease hole located in head. Outer ring type: Flat.
Days to Ship: | 8 Days or more |
---|
Cam Followers - Urethane coated, hex keyway, crowned.
MISUMI
Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C. Outer ring urethane coating can be configured to A90 or A50 Shore hardness. Options with or without seals. Outer ring type: Crowned.
Days to Ship: | 8 Days or more |
---|
Cam Followers - Urethane coated, hex keyway, flat.
MISUMI
Hexagonal wrench fastening method. Available in 52100 bearing steel or 440C stainless steel. Maximum operating temperatures of 80°C. Outer ring urethane coating can be configured to A90 or A50 Shore hardness. Options with or without seals. Outer ring type: Flat.
Days to Ship: | Same day or more |
---|
Show Stock Products
Cam Followers with Bracket - L-shaped, crowned or flat bracket.
MISUMI
The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 17 to 64mm in 1mm intervals.
Days to Ship: | 10 Days or more |
---|
Cam Followers with Bracket - Block, crowned or flat bracket.
MISUMI
The cam follower can be configured as flat or crowned as required by the application. Cam follower material available in 52100 bearing steel or 440C stainless steel, bracket material available in carbon steel or stainless steel. Cam follower center height can be configured from 12 to 40mm in 1mm intervals.
Days to Ship: | 10 Days or more |
---|
Roller Followers - Separated, crowned.
MISUMI
This series of rollers does not have a stem. Outer ring, inner ring and retainer can be separated. Options with or without seals. Maximum operating temperatures of 80°C. Roller follower material available in 52100 bearing steel or 440C stainless steel. Outer diameters configurable in sizes from 19mm to 47mm.
Days to Ship: | Same day or more |
---|
Show Stock Products
Eccentric Roller Followers - Hexagonal keyway, crowned.
MISUMI
Crowned cam followers are used to keep the load evenly distributed if it is deflected or if there is any misalignment between the follower and the tracked surface. Since the stem is eccentric to the center of the cam follower, it is possible to fine tune the position by rotating the stem during assembly. Roller follower material available in 52100 bearing steel. Options with or without seals. Maximum operating temperatures of 80°C.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Specifications |
Category |
Roller Type |
Roller O.D. D(Ø) |
Roller Width B(mm) |
Roller Follower ID(mm) |
Thread Size on Cam Follower (M)(mm) |
Tightening Method |
Cam Follower: Stud Screw (Fine Thread)(mm) |
Material |
Roller Lining |
Cam Follower Type |
Roller Follower Type |
Shaft |
Unit |
Roller Guiding Method |
Inner Ring |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | Cam Followers - Hexagon socket wrench head and shank, crowned. | Cam Followers - With urethane roller, crowned or flat, hexagonal wrench fastening. | Cam Followers with Bracket - L-shaped, crowned or flat bracket. | Cam Followers with Bracket - Block, crowned or flat bracket. | |||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 10 Days or more | 12 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Category | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Roller Follower | Roller Follower Pin | Bracket for Cam Follower | Cam Followers | Roller Follower | Roller Follower | Roller Follower Pin | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Cam Followers | Roller Follower | Cam Followers |
Roller Type | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | - | - | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | - | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Cylindrical Outer Ring | - | - | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring | Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring / Cylindrical Outer Ring | Spherical Outer Ring | Spherical Outer Ring |
Roller O.D. D(Ø) | 10 ~ 26 | 30 ~ 52 | 5 ~ 12 | 13 ~ 32 | 10 ~ 32 | 16 ~ 52 | 30 ~ 52 | 13 ~ 26 | 16 ~ 52 | 19 ~ 47 | 13 ~ 35 | 10 ~ 19 | 13 ~ 35 | 19 ~ 32 | 16 ~ 47 | - | - | 16 ~ 35 | 19 ~ 32 | 16 ~ 32 | - | 13 ~ 26 | 13 ~ 26 | 19 ~ 35 | - | - | 13 ~ 35 | 13 ~ 26 | 13 ~ 26 | 13 ~ 26 | 13 ~ 26 | - | - | 19 ~ 47 | 16 ~ 35 |
Roller Width B(mm) | 7 ~ 12 | 14 ~ 24 | 3 ~ 7 | 9 ~ 14 | 7 ~ 14 | 11 ~ 24 | 14 ~ 24 | 9 ~ 12 | 11 ~ 24 | 9.8 ~ 19.8 | 9 ~ 18 | 8.5 ~ 12 | 9 ~ 18 | 9.8 ~ 15.8 | 11 ~ 24 | - | - | 11 ~ 18 | 9.8 ~ 15.8 | 11 ~ 14 | - | 9 ~ 12 | 9 ~ 12 | 17 ~ 26 | - | - | 9 ~ 18 | 9 ~ 12 | 9 ~ 12 | 9 ~ 12 | 9 ~ 12 | - | - | 9.8 ~ 15.8 | 11 ~ 18 |
Roller Follower ID(mm) | - | - | - | - | - | - | - | - | - | 6 ~ 20 | - | - | - | 6 ~ 12 | 5 ~ 20 | - | - | - | 6 ~ 12 | 5 ~ 12 | - | - | - | - | - | - | - | - | - | - | - | - | - | 6 ~ 20 | - |
Thread Size on Cam Follower (M)(mm) | M3 ~ M10 | M12 ~ M20 | M2.5 ~ M6 | M5 ~ M16 | M3 ~ M12 | M6 ~ M20 | M12 ~ M20 | M5 ~ M10 | M6 ~ M20 | - | M5 ~ M16 | M3 ~ M8 | M5 ~ M16 | - | - | - | M5 ~ M16 | M6 ~ M16 | - | - | - | M5 ~ M10 | M5 ~ M10 | M8 ~ M16 | M5 ~ M12 | M6 ~ M12 | M5 ~ M16 | M5 ~ M10 | M5 ~ M10 | M5 ~ M10 | M5 ~ M10 | M5 ~ M12 | M6 ~ M12 | - | M6 ~ M16 |
Tightening Method | Hex Socket on Head | Hex Socket on Head, Thread Side | Hex Socket on Head | With Driver Groove | Hex Socket on Head | With Driver Groove | Hex Socket on Head, Thread Side | Hex Socket on Head / With Driver Groove | With Driver Groove | - | With Driver Groove | Hex Socket on Head | Hex Socket on Head / Hex Socket on Head, Thread Side | - | - | - | - | Hex Socket on Head / Hex Socket on Head, Thread Side | - | - | - | With Driver Groove | Hex Socket on Head | Hex Socket on Head / Hex Socket on Head, Thread Side | - | - | Hex Socket on Head / Hex Socket on Head, Thread Side / With Driver Groove | With Driver Groove | With Driver Groove | Hex Socket on Head | Hex Socket on Head | - | - | - | Hex Socket on Head / Hex Socket on Head, Thread Side |
Cam Follower: Stud Screw (Fine Thread)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Material | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | - | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel / Stainless Steel | Carbon Steel |
Roller Lining | None | None | None | None | None | None | None | With Resin | None | None | None | None | With Resin | With Urethane | None | None | None | None | With Urethane | With Urethane | None | With Urethane | With Urethane | With Resin | None | None | With Resin | With Urethane | With Urethane | With Urethane | With Urethane | None | None | None | None |
Cam Follower Type | Standard | Standard | - | Standard | Standard | - | Standard | - | - | - | Standard | - | - | - | - | - | - | Eccentric | - | - | - | - | - | - | - | - | - | - | - | - | - | Standard | Standard | - | Eccentric |
Roller Follower Type | - | - | - | - | - | - | - | - | - | Separate | - | - | - | With Urethane | Non-Separate | - | - | - | With Urethane | With Urethane | - | - | - | - | - | - | - | - | - | - | - | - | - | Separate | - |
Shaft | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided | Provided | Provided | None | None | None | None | Provided | None | None | None | Provided | Provided | Provided | None | None | Provided | Provided | Provided | Provided | Provided | Provided | Provided | None | Provided |
Unit | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | - | - | Metric Series | Metric Series | Metric Series | - | Metric Series | Metric Series | Metric Series | - | - | Metric Series | Metric Series | Metric Series | Metric Series | Metric Series | - | - | Metric Series | Metric Series |
Roller Guiding Method | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type / Full Roller Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | - | - | Retainer Type | Retainer Type | Retainer Type | - | Retainer Type | Retainer Type | Retainer Type | - | - | Retainer Type | Retainer Type | Retainer Type | Retainer Type | Retainer Type | - | - | Retainer Type | Retainer Type |
Inner Ring | - | - | - | - | - | - | - | - | - | Provided | - | - | - | Provided | Provided | - | - | - | Provided | Provided | - | - | - | - | - | - | - | - | - | - | - | - | - | Provided | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy