While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

MISUMI Carbide Radius End Mill（Model：Regular Type）

Search by specifying the lower class category

36 items

: 30; 45; 60

Days to Ship	All Same day 5 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 15 Days or Less 16 Days or Less 17 Days or Less

VAC Series Carbide 2-Flute Radius End Mill

MISUMI

[Features]
·Cutting edge radius also reinforced cutting edge rigid
·Ultra-fine particle cemented carbide base material and coating with excellent adhesion and heat resistance are adopted
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Spec Expansion

Price Reduction
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.005 Radius Precision

MISUMI

A high precision radius end mill for shrink fit holder. Achieves high accuracy and high efficiency machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
XAL Series Carbide Radius End Mill, 3-Flute, 45° Torsion/Regular Model

MISUMI

3-blade 45° helix radius that's resistant to chattering is available at an affordable price [C-Value]

Volume Discount

XAL

General Steel

3 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Radius End Mill, 4-Flute, 45° Torsion/Regular Model

MISUMI

4-Blade Radius for High-Efficiency and High-Speed Machining [C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Radius End Mill, 2-Flute/Short Model

MISUMI

Radius end mills are available at low prices [C-Value]

Volume Discount

XAL

General Steel

2 Flutes
Days to Ship: 8 Days or more
XAL Series Carbide Radius End Mill, 4-Flute/Short Model

MISUMI

The 4-blade type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes [C-Value]

Volume Discount

XAL

General Steel

4 Flutes
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model

MISUMI

Further suppresses chattering using the shrink-fit holder

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 4-Flute, 45° Spiral/Stub Model

MISUMI

Further suppresses chattering using the shrink-fit holder

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Stub Model

MISUMI

A popular multi-functional square with stub blade length

Volume Discount

TS

General Steel

3 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Short Model

MISUMI

A short blade length that allows plunging without chattering

Volume Discount

TS

General Steel

3 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model

MISUMI

Resistant to chattering, it has improved durability and excellent cutting performance

Volume Discount

TS

General Steel

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model

MISUMI

The long shank type is ideal for processing deep sections

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Stub Model

MISUMI

A popular multi-functional radius with stub blade length

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Short Model

MISUMI

Equipped with a radius for anti-chipping

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute, 45° Regular Model

MISUMI

A multi-functional 4-blade radius-equipped type that compatible with high-efficiency and high-speed processing

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 2-Flute Stub Model

MISUMI

2-Blade Radius for Shrink-Fit Holder

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model

MISUMI

Stub blade length with excellent edge rigidity

Volume Discount

TS

General Steel

2 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 2-Flute/Short Model

MISUMI

Rich variations that can be selected from the stock and manufactured products

Volume Discount

TS

General Steel

2 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 2-Flute/Regular Model

MISUMI

Classic radius with regular blade length

Volume Discount

TS

General Steel

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.02 Radius Precision

MISUMI

4-blade radius for shrink-fit that's capable of high feed

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, Regrinding

MISUMI

Stub blade length that's ideal for high-speed machining

Volume Discount

TS

General Steel

4 Flutes

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute/Short Model

MISUMI

4-blade design that enables efficient machining

Volume Discount

TS

General Steel

4 Flutes

S (Short)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 4-Flute/Regular Model

MISUMI

Classic radius with regular blade length

Volume Discount

TS

General Steel

4 Flutes

R (Regular)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral/Stub Model

MISUMI

With the blade length of 1x the blade diameter, it suppresses chattering

Volume Discount

TS

High-Hardness Steel

Multi-Flutes （5 ~）

B (Stub)
Days to Ship: 8 Days or more
TSC Series Carbide Radius End Mill, 3-flute, 45° spiral/short model

MISUMI

The popular radius type for stainless steel processing is also effective in preventing chipping

Volume Discount

TS

SUS

3 Flutes

S (Short)
Days to Ship: 8 Days or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model

MISUMI

In addition to the standard products, the radius can be selected extensively for manufactured products

Volume Discount

DLC

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model

MISUMI

The radius-equipped type prevents cutter marks and also shows effectiveness in improving the surface roughness

Volume Discount

DLC

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model

MISUMI

Non-coated manufactured products can be shipped on the 5th day in addition to the stocked products

Volume Discount

Non-Coated

Aluminum

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model

MISUMI

Radius type that's also effective in preventing cutter marks

Volume Discount

Non-Coated

Aluminum

3 Flutes

R (Regular)
Days to Ship: 8 Days or more
Carbide Radius End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model

MISUMI

Comes with the rounded edge that suppresses machining streaks in standing-wall multi-stage machining

Volume Discount

Non-Coated

Aluminum

3 Flutes
Days to Ship: 8 Days or more
Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute/Long Model

MISUMI

The diamond coated radius shape that's ideal for shaping graphite [C-Value]

Volume Discount

DIA

Graphite

4 Flutes

Long
Days to Ship: 8 Days or more
Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model

MISUMI

Small radius type that prevents cutter marks on resin

Volume Discount

Non-Coated

Resin

2 Flutes

R (Regular)
Days to Ship: 8 Days or more
Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill

MISUMI

3 day delivery of add-on machining radius in 0.1 mm increments

Non-Coated

General Steel
Days to Ship: 10 Days or more
New Products
XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion/Short Model

MISUMI

Introducing a short model in the 4-flute radius for high-efficiency and high-speed machining (C-Value)

Volume Discount
Days to Ship: 8 Days or more
TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

MISUMI

Introducing a new addition to the TSC series: the long-awaited unequal lead 4-flute radius end mill (helix angle of 40° / 43°)

Volume Discount
Days to Ship: 8 Days or more
VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

MISUMI

[Features]
·Suppresses chattering with unequal lead and unequal flutes
·Stable machining is possible while maintaining finished surface accuracy
·Cutting edge radius also reinforced cutting edge rigid
·Can process heat-treated steel up to 50HRC
·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

Volume Discount

Spec Expansion

Price Reduction
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	10 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Specifications
Flute Diameter (D)(φ)
R Size(mm)
Work Material
Flute Length (ℓ)(mm)
Number of Flutes(sheet)
Model
Overall Length (L)(mm)
Link Diameter (d)(mm)
Length Under Neck (ℓ1)(mm)
Processing Applications
Coating
Helix Angle (Θ)
R Precision(µm)

	Spec Expansion Price Reduction																																	New Products		Spec Expansion Price Reduction
Brand	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	VAC Series Carbide 2-Flute Radius End Mill	TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.005 Radius Precision	XAL Series Carbide Radius End Mill, 3-Flute, 45° Torsion/Regular Model	XAL Series Carbide Radius End Mill, 4-Flute, 45° Torsion/Regular Model	XAL Series Carbide Radius End Mill, 2-Flute/Short Model	XAL Series Carbide Radius End Mill, 4-Flute/Short Model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 3-Flute, 45° Spiral/Stub Model	TSC Series Carbide Radius End Mill (for Shrinkage Fitting), 4-Flute, 45° Spiral/Stub Model	TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Stub Model	TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Short Model	TSC Series Carbide Radius End Mill, 3-Flute, 45° Spiral/Regular Model	TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Long Shank, Short Model	TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Stub Model	TSC Series Carbide Radius End Mill, 4-Flute, 45° Spiral/Short Model	TSC Series Carbide Radius End Mill, 4-Flute, 45° Regular Model	TSC Series Carbide Radius End Mill, 2-Flute Stub Model	TSC Series Carbide Radius End Mill, 2-Flute/1.5D Flute Length (Stub) Model	TSC Series Carbide Radius End Mill, 2-Flute/Short Model	TSC Series Carbide Radius End Mill, 2-Flute/Regular Model	TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, ±0.02 Radius Precision	TSC Series Carbide Radius End Mill, 4-Flute/Stub Model, Regrinding	TSC Series Carbide Radius End Mill, 4-Flute/Short Model	TSC Series Carbide Radius End Mill, 4-Flute/Regular Model	TSC Series Carbide Radius End Mill for High-Hardness Copper Machining, Multi-Blade, Spiral/Stub Model	TSC Series Carbide Radius End Mill, 3-flute, 45° spiral/short model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model	DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 2-Flute/Regular Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute/Regular Flute Length Model	Carbide Radius End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute/Long Model	Carbide Radius End Mill for Resin Machining, 2-Flute/Regular Model	Non-Coated TS Coated Carbide 0.1mm Unit Radius Designated End Mill	XAL Coated Carbide Radius End Mill, 4-Flute, 45° Torsion/Short Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill
Days to Ship	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	10 Days or more	8 Days or more	8 Days or more	8 Days or more
Specifications		TS General Steel 4 Flutes B (Stub)	XAL General Steel 3 Flutes	XAL General Steel 4 Flutes	XAL General Steel 2 Flutes	XAL General Steel 4 Flutes	TS General Steel 3 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 3 Flutes B (Stub)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes R (Regular)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes B (Stub)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel Multi-Flutes （5 ~） B (Stub)	TS SUS 3 Flutes S (Short)	DLC Aluminum 2 Flutes R (Regular)	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 2 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes	DIA Graphite 4 Flutes Long	Non-Coated Resin 2 Flutes R (Regular)	Non-Coated General Steel
Flute Diameter (D)(φ)	1 ～ 12	2 ～ 6	3 ～ 12	4 ～ 12	1 ～ 12	3 ～ 20	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 12	3 ～ 20	3 ～ 22	3 ～ 12	3 ～ 20	3 ～ 20	2 ～ 12	1 ～ 12	1 ～ 20	1 ～ 20	2 ～ 12	1 ～ 12	1 ～ 12	1 ～ 12	6 ～ 12	3 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	2 ～ 12	5 ～ 22	6 ～ 12	1 ～ 10	1 ～ 20	1 ～ 20	2 ～ 25	1.5 ～ 12
R Size(mm)	0.1 ～ 3	0.2 ～ 0.5	0.2 ～ 2	0.2 ～ 2	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.3 ～ 1	0.5 ～ 1	0.3 ～ 2	0.2 ～ 2	0.2 ～ 2	0.5 ～ 1	0.2 ～ 3	0.2 ～ 3	0.2 ～ 3	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.3 ～ 1	0.1 ～ 3	0.1 ～ 3	0.1 ～ 3	0.5 ～ 2	0.5 ～ 2	0.2 ～ 1	0.2 ～ 1	0.2 ～ 1	0.2 ～ 1	0.5 ～ 2	0.5 ～ 3	0.2	0.1 ～ 3	0.2 ～ 3	0.2 ～ 6.5	0.2 ～ 3
Work Material	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	General Steel[◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]
Flute Length (ℓ)(mm)	2.5 ～ 30	3 ～ 9	16 ～ 38	18 ～ 38	3 ～ 30	8 ～ 38	4.5 ～ 18	4.5 ～ 18	4.5 ～ 18	5 ～ 26	5 ～ 56	4.5 ～ 30	4.5 ～ 18	5 ～ 38	5 ～ 56	3 ～ 18	1.5 ～ 18	2 ～ 40	3 ～ 60	3 ～ 18	1.5 ～ 18	2 ～ 24	3 ～ 36	5 ～ 12	7 ～ 18	5 ～ 36	5 ～ 36	5 ～ 36	5 ～ 36	9 ～ 33	30 ～ 60	3 ～ 30	4 ～ 60	3 ～ 45	4 ～ 50	4 ～ 30
Number of Flutes(sheet)	2	4	3	4	2	4	3	4	3	3	3	4	4	4	4	2	2	2	2	4	4	4	4	6	3	2	3	2	3	3	4	2	2 ～ 4	4	4	4
Model	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type
Overall Length (L)(mm)	50 ～ 130	50	60 ～ 100	60 ～ 100	50 ～ 75	50 ～ 100	40 ～ 65	40 ～ 65	60 ～ 100	60 ～ 100	60 ～ 130	80 ～ 200	60 ～ 100	60 ～ 110	60 ～ 130	35 ～ 60	40 ～ 75	40 ～ 110	45 ～ 125	35 ～ 60	40 ～ 75	40 ～ 75	45 ～ 85	60 ～ 85	60 ～ 100	40 ～ 80	40 ～ 80	40 ～ 80	40 ～ 80	80 ～ 200	150 ～ 200	50 ～ 80	40 ～ 125	50 ～ 110	50 ～ 120	50 ～ 150
Link Diameter (d)(mm)	6 ～ 12	6	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 20	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 20	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	6 ～ 12	6 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 12	4 ～ 20	6 ～ 12	3 ～ 10	4 ～ 20	4 ～ 20	6 ～ 25	6 ～ 12
Length Under Neck (ℓ1)(mm)	-	-	-	-	-	-	-	-	14 ～ 68	18 ～ 70	26 ～ 92	10 ～ 18	14 ～ 68	18 ～ 73	26 ～ 92	-	14 ～ 45	17 ～ 45	23 ～ 55	-	14 ～ 45	17 ～ 45	23 ～ 55	11 ～ 55	-	23 ～ 50	23 ～ 50	23 ～ 50	23 ～ 50	-	60 ～ 85	-	-	-	-	-
Processing Applications	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Inclined Cutting	Flat Surface / Side Surface / Curved Surface / Groove	Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) / Inclined Cutting
Coating	-	For High Hardness (Silicone-Based)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For General Steel (AlCrN etc.)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	DLC	DLC	Non-Coated	Non-Coated	Non-Coated	Diamond Coat	Non-Coated	For High Hardness (Silicone-Based) / Non-Coated	For General Steel (AlCrN etc.)	For High Hardness (Silicone-Based)	-
Helix Angle (Θ)	-	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Others	-
R Precision(µm)	-	±0.005	±0.02	±0.02	±0.02	±0.02	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.02	±0.01 ～ ±0.02	±0.02	±0.01 ～ ±0.02	±0.01 ～ ±0.02	±0.02	±0.02	±0.02	±0.02	±0.02	±0.02	-

Configure

Specification/Dimensions

Metric / Inch
- metric
Clear

Flute Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2　

2.5

2.8

3

3　

3.5

4

4　

4.5

5

5　

5.5

6

7

8

8　

9

10

10　

11

12

12　

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.02

0.03

0.05

0.1

0.15

0.2

0.25

0.3

0.4

0.5

0.6

0.7

0.75

0.76

0.8

0.813

0.9

1

R1

1.1

1.2

1.219

1.3

1.4

1.5

R1.5

1.6

1.625

1.7

1.8

1.9

2

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.05

3.2

3.5

4

R4

5

R5

6

R6

6.35

6.5

8
[0.1-3/0.1mm Unit(s)]
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel ~ HRC60
- High-Hardness Steel – HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Flute Length (ℓ)(mm)
0.08

0.13

0.15

0.16

0.2

0.24

0.25

0.28

0.3

0.32

0.4

0.48

0.5

0.55

0.56

0.6

0.64

0.65

0.7

0.72

0.75

0.8

0.9

0.96

1

1.2

1.44

1.5

1.6

1.8

2

2.1

2.2

2.25

2.3

2.4

2.5

2.7

3

3　

3.2

3.5

3.7

4

4　

4.5

4.8

5

5　

5.25

5.5

5.6

6

6　

6.75

7

7.5

8

8.25

8.4

9

10

10　

10.5

11

12

12　

12.5

13

13.5

14

15

15　

16

16.5

17

17.5

18

19

19.5

20

21

22

24

25

25.5

26

27

28

30

32

33

34

35

36

38

40

42

45

48

50

55

56

60

64

75

80

100
[5-56/1mm Unit(s)]
Drawing

Clear

Number of Flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Model
- Regular Type
- High-Feed Radius
- Long Neck Radius
- Tapered Neck Radius
Clear

Overall Length (L)(mm)
32

34

35

38

40

45

48

49

50

51

52

53

55

57

58

60

62

63

64

65

68

70

72

74

75

80

83

85

86

88.9

90

92

95

100

104

105

110

115

120

121

125

130

135

140

145

150

160

170

175

180

185

190

200

220

230
Drawing

Clear

Link Diameter (d)(mm)
3

4

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Length Under Neck (ℓ1)(mm)
0.2

0.5

1

1.5

1.6

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

11

12

12.35

12.5

13

14

14.35

15

16

16.65

18

20

21

22

24

25

26

27

28

30

32

32.1

32.6

33.6

34

34.6

35

35.6

36

38

39

40

41.2

42

42.2

43.2

44

44.2

45

45.2

46.5

48

50

54

55

56

60

60.3

60.8

61.3

62.3

63.3

64

64.3

65

66

70

72

75

80

80.4

81.4

82

82.4

84

85

90

92.9

95

100

102

105

108

110

120

120.6

121.6

122.6

125

140

160

160.8

-
[11-92/1mm Unit(s)]
Drawing

Clear

Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
Images

Clear

Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- DLC
- Diamond Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Helix Angle (Θ)
- No Helix/ None
- Weak Helix (15 to 25°)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
- Others
Clear

R Precision(µm)
-0.032～-0.059

-0.025～-0.047

-0.020～-0.038

-0.014～-0.028

0～-20

0～-0.05

0～-0.030

0～-0.015

0～-0.01

0～+0.04

±0.005

0.005～-0.005

±0.01

0.01～-0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (36)
- C-Value ()
- OSG (29)
- Nachi-Fujikoshi (11)
- GUHRING (9)
- DIJET (8)
- KYOWASEIKO (7)
- NS TOOL (7)
- SANDVIK (5)
- 7 LEADERS (4)
- OKAZAKI (4)
- S&K (4)
- UNION TOOL (2)
- ATOM (1)
- TAIYO TOOL (1)
- Poulten&Graf (0)
- VAN HOORN (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Radius End Mill

- Long Neck Radius End Mills (Carbide)
- Radius End Mills (Carbide)

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

MISUMI Carbide Radius End Mill（Model：Regular Type）

Search by specifying the lower class category

Configure

Specification/Dimensions

Metric / Inch

Flute Diameter (D)(φ)

R Size(mm)

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Model

Overall Length (L)(mm)

Link Diameter (d)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Coating

Helix Angle (Θ)

R Precision(µm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Radius End Mill

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)