Mirai Industry Plastic Conduit Accessories（Color：Grey）

• 

  Cosmetic Cover Accessory for Molding Ducts

  Mirai Industry

  [Features]
  This is a cosmetic cover for use with molding duct connections such as cosmetic covers for areas where walls and ceilings are penetrated, as well as pole boxes (both indoor and outdoor use). This product can also be used with free joints (bellows portions).

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Temporary frame bushing 45° (PF tube and compact type) G type

  Mirai Industry

  Compact, with oscillating 45° temporary frame bushing (PF tube, G-type, compact). Optimal for situations where ferrous piping needs to be avoided. The bushing can be anchored with the included nails.
  
  [Features]
  · Compact, and has a freely adjustable oscillating angle.
  · Optimal for non-ferrous piping, etc.
  · Can be anchored with the included nails.
  · Equipped with seal for preventing intrusion of unset cement.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  No. 2 connector

  Mirai Industry

  No. 2 connector used for rigid PVC wire tube (J-tube).
  
  [Features]
  1416 S type can also be mounted to a 16 knock hole (φ22 mm), knock diameter (φ22 mm φ27 mm).
  Compact type for combined use.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  PF Pipe Connector (G-Type) Gray【1-10 Pieces Per Package】

  Mirai Industry

  This is a PF tube connector (JIS C8412/G type). The color of this product is gray.
  
  [Features]
  · Connection and release are both possible with just one touch.
  · A cap is attached, preventing intrusion of unsolidified concrete.
  · Waterproof configuration has o-ring and packing.

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  PF Pipe Single-Side Saddle【1-50 Pieces Per Package】

  Mirai Industry

  [Features]
  ・When you use PF pipe in an exposed piping format, this single-sided saddle can be used for fixing it in place.
  ・Can be firmly fixed in place with a single screw.
  ・Includes a screw hole for fixing the unit in place temporarily.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  PF tubing dual saddle (Mira-Flex SS use)

  Mirai Industry

  Saddle clamp (with rib) for PF tubing.
  
  [Features]
  · The protrusion on the inside of the saddle clamp bites into the tubing recess. This secures the tube firmly in place and prevents it from shifting.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  TS Coupling (Straight Type)

  Mirai Industry

  [Features]
  This is a TS coupling (straight type JISC8432) unit for use with rigid vinyl electrical conduits.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  VE half saddle【1-50 Pieces Per Package】

  Mirai Industry

  [Features]Rigid PVC wire tube (J-tube) · TL tube for half saddle use.
  · Can be firmly attached with a single screw.
  · Can also be used as a saddle end stop.
  · Nylon type suitable for internal machinery use.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  VE both saddles (VE tube-TL tube)

  Mirai Industry

  [Features]
  Rigid PVC wire tube (J-tube).
  Both saddles used for the TL-tube.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  End Cover (Standard Type for CD Pipe Use)

  Mirai Industry

  [Features]
  ·This is an end cover for CD pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  End Cover (standard type for use with PF pipes)

  Mirai Industry

  [Features]
  ·This is an end cover for PF pipes (G-type) that can be used for operations such as pulling cable into two-layer ceilings.
  · Connection and release are both possible with just one touch.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  End Cover 45 (PF tube use 45° Type)

  Mirai Industry

  [Features]
  · PF tube end cover use for wall-side installations etc. (45° · G type).
  · Product intermediate between an end cover (standard type) and a temporary frame bushing.
  · Connection and release are both possible with just one touch.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Entrance cap

  Mirai Industry

  [Features]
  Entrance cap for rigid PVC wire tube use (J-tube) (JISC8432).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Combination coupling (PF tube ⇔ VE tube)

  Mirai Industry

  [Features]
  Combination coupling between PF tube and VE tube.

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  New F Koro End (screw mounting, for use with CD pipes with coating included)

  Mirai Industry

  With just a single nail, CD pipes can be anchored in place. This is an end cover (screw nails included) for use with VVF rolling wiring.
  
  [Features]
  · Can be secured simply by simply hammering in a single nail.
  ·The compact size makes construction a breeze even in confined spaces.
  · Includes a seal for preventing leakage.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Bend Fitting

  Mirai Industry

  [Features]
  Normal bend for rigid PVC wire tube (J-tube) (JISC8432).

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Mall duct wall cover accessories

  Mirai Industry

  [Features]
  Wall duct use wall cover for use at points where cable exits from wall. (Combination indoor/outdoor use).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Guide duct accessories entrance cover

  Mirai Industry

  [Features]
  Used in locations where cables are pulled in from drop ceilings.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Corner Joint Accessory for Molding Ducts

  Mirai Industry

  [Features]
  · This corner joint is used as a cosmetic cover for molding ducts in corner areas where cables are pulled in, such as ceilings and walls (for both indoor and outdoor use).
  · The 60 model can also be connected to free joints (bellows).
  · The 60 model can be used for connection of molding ducts between 60 models and 100 models.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mold duct saddle accessories

  Mirai Industry

  [Features]
  · Cable protector duct saddle used for duct crosscut reinforcements, deformation prevention, and concealing joined sections with cover.
  · Can be used for the intermediate part and connections of the free joint.

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Duct End Accessory for Molding Ducts

  Mirai Industry

  This duct end is used for the ends of molding ducts (both outdoor and indoor use). Includes a knock unit for pulling out cables. Can be used for connecting VE pipes and PF pipes.
  
  [Features]
  · Used for the ends of ducts.
  ·Includes a knock unit for pulling out cables.
  ·Can be used for connecting VE pipes and PF pipes.

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Duct Bend Accessory for Molding Ducts

  Mirai Industry

  This duct bend for molding ducts is used for corners and other bending positions (both indoor and outdoor use).
  
  [Features]
  · Used for corners and other bending positions.
  · Model 60 can also be connected to free joints (bellows).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Guide duct accessories; duct out of alignment

  Mirai Industry

  Angled corner bracket used for guide ducts when connecting corner locations (combined indooroutdoor use).
  
  [Features]
  · For mutual connections.
  When cable is used to place a load on the cover, pan-head tapping screws can be used to anchor the cover.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Duct Inside Corner Accessory for Molding Ducts

  Mirai Industry

  [Features]
  · This is a duct inside corner for use with corner connections of molding ducts (both indoor and outdoor use).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Tees Accessory for Molding Ducts

  Mirai Industry

  [Features]
  · These are tees for use with duct branches of molding ducts (both indoor and outdoor use).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Free Joint Accessory for Molding Ducts

  Mirai Industry

  [Features]
  This is a free joint fitting for use with molding ducts that are flexible and compatible with uneven surfaces (both indoor and outdoor use). Can be anchored in place with a saddle.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Guide duct accessories sliding cover

  Mirai Industry

  [Features]
  Use for cable sliding part.
  · Model 100 can also be connected to free joints (bellows).

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Freely Bending Accessory for Molding Ducts

  Mirai Industry

  [Features]
  This is a flexible fitting that can be bent freely from 0° to 90° and used for bending sections, outside corners, and inside corners for molding ducts (both indoor and outdoor use).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Conversion Adapter Accessory for Molding Ducts

  Mirai Industry

  [Features]
  This is a conversion adapter for molding ducts that can be mounted to tees for molding duct use or branch boxes and used for piping (stopping point) with molding ducts of different diameters (both indoor and outdoor use).

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Guide duct accessories both saddles

  Mirai Industry

  [Features]
  Use for duct cover fall prevention, duct deformation prevention, tamper proofing, and connection blind cover.
  Has a claw for preventing duct deviation inside the saddle.
  · Can be used for intermediate parts and connections of free joints.

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  Consolidated Socket Accessory for Molding Ducts

  Mirai Industry

  [Features]
  This is a consolidated socket for molding ducts that is used in duct-to-duct fitting locations (both indoor and outdoor use).

  • Volume Discount

  Days to Ship:	7 Days or more

• 

  For the temporary frame bushing (CD tube)

  Mirai Industry

  Centering coupling (CD tube, G-type) used for lowering into, raising, and penetrating partition walls.
  
  [Features]
  · Used for lowering into, raising, and penetrating partition walls, etc.
  · Connection and release are both possible with just one touch.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  For the frame bushing (PF tube)

  Mirai Industry

  Centering coupling (PF tube, G-type) used for lowering into, raising, and penetrating partition walls.
  
  [Features]
  · Used for lowering into, raising, and penetrating partition walls, etc.
  · Connection and release are both possible with just one touch.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Temporary frame bushing 45° (CD tube and compact type) G type

  Mirai Industry

  Compact with swinging 45° temporary frame bushing (CD tube-G-type compact). The bushing can be fixed simply using the included nails.
  
  [Features]
  · Compact and freely adjustable oscillating angle.
  · Optimal for piping that does not use steel, etc.
  · Can be secured simply by driving in the attached nail.
  · Equipped with seal for preventing intrusion of unset cement.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Feed end (CD tube-G type)

  Mirai Industry

  Used to mount sensors, etc. using a feed pipe.
  
  [Features]
  · Used to mount sensors, etc. using a feed pipe.
  · Because it is a G-type, it can be easily connected or unlocked. Comes with unset concrete leakage prevention seal.
  · With anchor: By pulling the VVF cable into double ceilings, heavy things such as lighting equipment can be directly mounted.
  · Screw grip: can be anchored with the included nails.
  · There is also a red color that is convenient for identifying the type of wiring. *Can also easily be attached to a deck plate.
  · Use with the separately sold deck plate pedestal.

  • Volume Discount

  Days to Ship:	9 Days or more

Loading...