(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MS, for Intermediate to Rough Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Grooving Tip GBA32/GBA43
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Grooving Tip GBA32/GBA43, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○MQ, for Finishing to Intermediate Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○MS Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive with Hole TPMT Medium Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TPGB
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TPGB, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on For Atobiki (Small Tool), see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ for Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○ "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○ Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG "Rough Cutting"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○MQ Finishing to Medium Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MS, for Intermediate to Rough Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○L/R-ST Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
•No. of Usable Corners : 6~6
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-B Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT, for Finishing to Intermediate Cutting Stainless Steel, Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPGN No Breaker Cast Iron, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive without Hole TPMR "Medium Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive without Hole TPMR Medium Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBMT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VCGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Diamond Shape 35° / Positive with Hole VCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 80° Hexagon Type Positive with Hole WBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive DCMT
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive DCMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TCGW, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive VBMT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive VBMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 70° / Positive with Hole JCET/JCGT
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Diamond Shape 70° / Positive with Hole JCET/JCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Round, Positive, with Hole RCGX/RCMX
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•No. of Usable Corner: 9 or more
•Rake Angle: Positive
•Breaker Application: Medium Cutting
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•Rake Angle: Negative
•Preferred Hand: No Preferred Hand
•rε: -
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Preferred Hand : No Preferred Hand
For complete product overview and details on For Extra Hard Roll Forming, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond Negative
KYOCERA
•Shape : C (80° Diamond), D (55° Diamond), T (Triangular), V (35° Diamond), W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond Negative, see the sections below:
Days to Ship: | 8 Days or more |
---|
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
•Nose R : 0.2, Others
For complete product overview and details on Lathe Turning (1-Corner Specification) Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond for Deep Grooving (1 Corner Specification)
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond for Deep Grooving (1 Corner Specification), see the sections below:
Days to Ship: | 8 Days or more |
---|
Aluminum Wheel (1-Corner Specifications), Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Aluminum Wheel (1-Corner Specifications), Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond for Groove Insertion and Horizontal Feeding
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Diamond for Groove Insertion and Horizontal Feeding, see the sections below:
Days to Ship: | 8 Days or more |
---|
System Bar Diamond for Small Bores
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Right
For complete product overview and details on System Bar Diamond for Small Bores, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other, Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Tip Diamond for Small Bores, see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
KTKF Type/KTKF Type Space Holder Conforming Tip
KYOCERA
The right-handed (R) holder conforms to right-handed (R) tips while the left-handed (L) holder conforms to left-handed (L) tips.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | 80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ "for Rough Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | 60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium" | Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron" | |||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Shape | D (55° Diamond) | V (35° Diamond) | C (80° Diamond) | Others | Others | C (80° Diamond) | V (35° Diamond) | W (Hexagonal) | C (80° Diamond) | T (Triangular) | T (Triangular) | Others | C (80° Diamond) | S (Square) | W (Hexagonal) | W (Hexagonal) | D (55° Diamond) | T (Triangular) | C (80° Diamond) | T (Triangular) | T (Triangular) | D (55° Diamond) | S (Square) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | D (55° Diamond) | T (Triangular) | V (35° Diamond) | Others | R (Round) | T (Triangular) | C (80° Diamond) | R (Round) | Others | C (80° Diamond) / D (55° Diamond) / T (Triangular) / V (35° Diamond) / W (Hexagonal) | Others | Others | Others | Others | Others | Others | S (Square) / T (Triangular) / Others | Others |
Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | Other | Other | Tapping |
No. of Usable Corners | 4 | 2 | 2 | - | - | 4 | 4 | 6 | 2 | 3 | 1 | - | 4 | 8 | 6 | 6 | 2 | 3 | 4 | 6 | 6 | 2 | 4 | 3 | 2 | 2 | 3 | 1 | 1 | 1 | 2 | 9 or more | 3 | - | - | - | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | - |
Work Material | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy | Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | Medium - Heavy Cutting | Finish / Medium Cutting | Finish | - | - | Medium - Heavy Cutting | Medium Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | - | - | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | - | - | - | Finish | Medium Cutting | Medium Cutting | - | - | - | - | - | - | - | - | - | - | - | - |
Rake Angle | Negative | Positive | Positive | - | - | Negative | Negative | Negative | Positive | Positive | Positive | - | Negative | Negative | Negative | Negative | Positive | Positive | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Negative | Negative | - | Negative | Positive | - | - | - | Positive | - | - | - |
Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left / No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left / No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right | Right | No Preferred Hand | Right / Left |
Nose R | 0.4 ~ 1.2 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | Others | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | Others | 0.4 ~ 1.2 | 0.8 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ Others | 0.4 ~ 1.6 | 0.4 ~ 0.8 | 0.2 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.4 | 0.2 ~ Others | 0.2 ~ Others | - | 0.2 ~ Others | 0.8 | - | - | 0.2 ~ 1.2 | 0.2 ~ Others | 0.2 | Others | Others | 0.2 | Others | 0.2 ~ 0.4 | Others |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | - | 0.5 ~ 4.8 | 1 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ~ 6 | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy