(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
KYOCERA Turning Inserts（Work Material：Cast Iron Page4）
| Days to Ship |
|
|---|
-
60° Triangle Negative with Hole TNMA1604○○ without Breaker "Cast Iron"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative with Hole TNMA1604○○ without Breaker Cast Iron, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNGG1604○○ "Medium to Rough" Aluminum Nonferrous
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNGG1604○○ Medium to Rough Aluminum Nonferrous, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNMG1604○○AH "Medium to Rough" Aluminum Nonferrous
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○AH Medium to Rough Aluminum Nonferrous, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNGG11○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG11○○-S Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
60° Triangle Negative with Hole TNGG16○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-S Finishing, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
60° Triangle Negative with Hole TNEG1604○○-SSF "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNEG1604○○-SSF Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
60° Triangle Negative with Hole TNGG11○○-B "Finishing to Medium"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG11○○-B Finishing to Medium, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-C Medium to Rough, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG22○○-C Medium to Rough, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
60° Triangle Negative, with Hole TNGG11○○
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative, with Hole TNGG11○○, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNGG16○○-25R "Medium to Rough" Low-Resistance
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-25R Medium to Rough Low-Resistance, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing"
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Number of Usable Corners: 4
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○TN-V "for Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○TN-V for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG1604○○ "for Rough Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG1604○○ for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNGA1604○○, without Breaker, "for Cast Iron"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNGA1604○○, without Breaker, for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
80° Hexagon Type Negative with Hole WNMG○○GP "Finishing"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○CQ Finishing to Medium Lifting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG Medium to Rough Aluminum Non Ferrous, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
80° Hexagon Type Negative with Hole WNMG○○ZS "Rough Cutting" Cast Iron
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○ZS Rough Cutting Cast Iron, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNMG○○GC "Rough Cutting" Cast Iron
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○GC Rough Cutting Cast Iron, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
80° Hexagon Type Negative with Hole WNMA○○ without Breaker "Cast Iron"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMA○○ without Breaker Cast Iron, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
80° Hexagon Type Negative with Hole WNMG○○PH "Rough Machining" Cast Iron
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○PH Rough Machining Cast Iron, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNGG○○-S "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 80° Hexagon Type Negative with Hole WNGG○○-S Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNGG○○ "Medium Cutting"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 80° Hexagon Type Negative with Hole WNGG○○ Medium Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT Low-Feed, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT○○AH for Finishing to Intermediate Cutting Aluminum, Nonferrous Metals, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT○○R/L for Finishing to Intermediate Cutting Aluminum, Nonferrous Metals, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCGW without Breaker "for Cast Iron"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGW without Breaker for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CPMH for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CPMB without Breaker "for Cast Iron"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CPMB without Breaker for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCET Low-Feed, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT for Finishing to Intermediate Cutting Aluminum, Nonferrous Metals, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGW without Breaker "for Cast Iron"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGW without Breaker for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DPET for Finishing, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DPET "Low-Feed"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DPET Low-Feed, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, with Hole SCMT Finishing to Semi-Finishing, see the sections below:- Volume Discount
Days to Ship: 11 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| Use |
| No. of Usable Corners |
| Work Material |
| Breaker Application |
| Rake Angle |
| Preferred Hand |
| Nose R |
| Outer Diameter / Inner Diameter (For Tapping) |
| Groove Width (For Grooving / Parting) |
| Thread Type (For Tapping) |
| No. of Teeth (For Tapping) |
| Pitch (For Tapping) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | 60° Triangle Negative with Hole TNMA1604○○ without Breaker "Cast Iron" | 60° Triangle Negative with Hole TNGG1604○○ "Medium to Rough" Aluminum Nonferrous | 60° Triangle Negative with Hole TNMG1604○○AH "Medium to Rough" Aluminum Nonferrous | 60° Triangle Negative with Hole TNGG11○○-B "Finishing to Medium" | 60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough" | 60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough" | 60° Triangle Negative with Hole TNGG16○○-25R "Medium to Rough" Low-Resistance | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, "for Finishing to Intermediate Cutting" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○TN-V "for Intermediate Cutting" | Turning Insert Diamond 35°, Negative, with Hole, VNMG1604○○ "for Rough Cutting" | Turning Insert Diamond 35°, Negative, with Hole, VNGA1604○○, without Breaker, "for Cast Iron" | Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting" | 80° Hexagon Type Negative with Hole WNMG○○CQ "Finishing to Medium Lifting" | 80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous | 80° Hexagon Type Negative with Hole WNMG○○ZS "Rough Cutting" Cast Iron | 80° Hexagon Type Negative with Hole WNMG○○GC "Rough Cutting" Cast Iron | 80° Hexagon Type Negative with Hole WNMA○○ without Breaker "Cast Iron" | 80° Hexagon Type Negative with Hole WNMG○○PH "Rough Machining" Cast Iron | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed" | Turning Insert Diamond 80°, Positive, with Hole, CCGW without Breaker "for Cast Iron" | Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CPMB without Breaker "for Cast Iron" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed" | Turning Insert Diamond 55°, Positive, with Hole, DCGW without Breaker "for Cast Iron" | Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DPET "Low-Feed" | Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing" | ||||||||||
| Days to Ship | 8 Days or more | 11 Days or more | 11 Days or more | 10 Days or more | 9 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 9 Days or more | 9 Days or more | 11 Days or more | 11 Days or more | 11 Days or more |
| Shape | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | S (Square) |
| Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
| No. of Usable Corners | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 4 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 4 |
| Work Material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron |
| Breaker Application | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Finish | Finish | Finish | Medium Cutting | Heavy Cutting | Heavy Cutting | Medium Cutting | Medium - Heavy Cutting | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Heavy Cutting | Heavy Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting |
| Rake Angle | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive |
| Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | Right / Left | Right / Left | Right / Left | Right | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left / No Preferred Hand | No Preferred Hand | Right / Left | Right | No Preferred Hand |
| Nose R | 0.4 ～ Others | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ 0.4 | 0.2 ～ 0.4 | 0.2 ～ 0.4 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ 0.4 | 0.4 ～ 0.8 | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.4 | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.4 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.2 ～ 0.4 | 0.4 | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.8 | 0.2 ～ Others | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Others | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Others | 0.8 | 0.2 ～ Others | 0.2 ～ Others | 0.2 ～ 0.8 | 0.2 ～ Others | 0.2 | 0.2 | 0.4 ～ 0.8 |
| Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Shape
- C (80° Diamond)
- D (55° Diamond)
- R (Round)
- S (Square)
- T (Triangular)
- V (35° Diamond)
- W (Hexagonal)
- Others
-
Use
- Outer Diameter / Inner Diameter
- Grooving / Parting
- Tapping
- Other
-
No. of Usable Corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
- High-Hardness Material
-
Breaker Application
- Finish
- Medium Cutting
- Medium - Heavy Cutting
- Heavy Cutting
- Light Cutting
-
Rake Angle
- Negative
- Positive
-
Preferred Hand
-
Nose R
-
Outer Diameter / Inner Diameter (For Tapping)
-
Metric / Inch
- metric
-
Groove Width (For Grooving / Parting)
-
Thread Type (For Tapping)
-
No. of Teeth (For Tapping)
-
Pitch (For Tapping)
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- KYOCERA (221)
- SUMITOMO ELEC (11)
- DAISHOWASEIKI (8)
- OSG (1)
- SANDVIK (1)
- SANWASEISAKUSYO (1)
- DIJET (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy