(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
KYOCERA Turning Inserts（Work Material：Steel）
| Days to Ship |
|
|---|
-
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
For complete product overview and details on End Face Grooving Tip GVF, see the sections below:- Volume Discount
Days to Ship: 6 Days or more -
Outer Diameter Grooving Tip GBA32/GBA43
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Grooving Tip GBA32/GBA43, see the sections below:- Volume Discount
Days to Ship: 7 Days or more -
S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive with Hole TPMT Medium Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "Low-Feed"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT Low-Feed, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Outer Diameter Threading Tool Holder KTT Type, Compatible Chip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Threading Tool Holder KTT Type, Compatible Chip, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○-C Medium to Rough, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing"
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Number of Usable Corners: 4
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
60° Triangle Positive without Hole TPGR○○-B "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Positive without Hole TPGR○○-B Medium Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Diamond Shape 35° / Positive with Hole VBMT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBMT, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CQ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Diamond)
· Number of Usable Corners: 4
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNMG16○○PP "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PP Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
60° Triangle Negative with Hole TNGG16○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-S Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCET Low-Feed, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DPET for Finishing, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Square 90°, Positive, without Hole SPMR "Semi-Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPMR Semi-Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Inner Diameter Thread Cutting Tip 16IR/L○○ISO
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 16IR/L○○ISO, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Outer Diameter Thread Cutting Tip 22ER/L○○60
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Outer Diameter Thread Cutting Tip 22ER/L○○60, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Grooved End Face Chip GVF Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Grooved End Face Chip GVF Full R Groove, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Round, Negative, with Hole RNMG
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•No. of Usable Corner: 9 or more
•Rake Angle: Negative
•Breaker Application: Medium Cutting- Volume Discount
Days to Ship: 8 Days or more -
Diamond Shape 70° / Positive with Hole JCET/JCGT
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Diamond Shape 70° / Positive with Hole JCET/JCGT, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Round, Positive, with Hole RCGX/RCMX
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•No. of Usable Corner: 9 or more
•Rake Angle: Positive
•Breaker Application: Medium Cutting- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : Others
•Use : Other
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on For Atobiki (Small Tool), see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Inner Diameter Thread Cutting Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : 0.2, Others
For complete product overview and details on Inner Diameter Thread Cutting Tip, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KTKF Type/KTKF Type Space Holder Conforming Tip
KYOCERA
The right-handed (R) holder conforms to right-handed (R) tips while the left-handed (L) holder conforms to left-handed (L) tips.
- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP For Finishing with Wiper Edge, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting", see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○HQ/CNGG12○○HQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○CQ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CJ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| Use |
| No. of Usable Corners |
| Work Material |
| Breaker Application |
| Rake Angle |
| Preferred Hand |
| Nose R |
| Outer Diameter / Inner Diameter (For Tapping) |
| Groove Width (For Grooving / Parting) |
| Thread Type (For Tapping) |
| No. of Teeth (For Tapping) |
| Pitch (For Tapping) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip | Turning Insert Diamond 55°, Positive, with Hole, DCGT "Low-Feed" | Outer Diameter Threading Tool Holder KTT Type, Compatible Chip | 60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○GP, "for Finishing" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○HQ, "for Finishing to Intermediate Cutting" | 80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "for Intermediate Cutting" | 60° Triangle Positive without Hole TPGR○○-B "Medium Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCET "Low-Feed" | Turning Insert Diamond 55°, Positive, with Hole, DPET "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" | |||||||||||||||||||||||
| Days to Ship | 6 Days or more | 7 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more |
| Shape | Others | Others | T (Triangular) | T (Triangular) | V (35° Diamond) | D (55° Diamond) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | D (55° Diamond) | T (Triangular) | V (35° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | T (Triangular) | T (Triangular) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | S (Square) | T (Triangular) | T (Triangular) | Others | Others | R (Round) | Others | R (Round) | Others | T (Triangular) | Others | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) |
| Use | Grooving / Parting | Grooving / Parting / Tapping | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Tapping | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Tapping | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
| No. of Usable Corners | - | - | - | 3 | 2 | 2 | 3 | - | 6 | 4 | 4 | 6 | 2 | 3 | 2 | 4 | 4 | 4 | 4 | 6 | 6 | 2 | 2 | 2 | 4 | 3 | 3 | - | - | 9 or more | 2 | 9 or more | - | 3 | - | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Work Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Steel |
| Breaker Application | - | - | - | Medium Cutting | Finish / Medium Cutting | Medium Cutting | Finish | - | Heavy Cutting | Finish | Medium Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Finish / Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Finish | Medium - Heavy Cutting | Finish | Finish | Medium Cutting | Medium Cutting | Finish | Medium Cutting | - | - | - | - | Medium Cutting | Finish | Medium Cutting | - | - | - | Finish | Medium Cutting | Finish | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting |
| Rake Angle | - | - | - | Positive | Positive | Positive | Positive | - | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Negative | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | - | - | Negative | Positive | Positive | - | Positive | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Preferred Hand | Right / Left | Right / Left | Right | No Preferred Hand | Right / Left | Right / Left | Right / Left | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | Right / Left | Right / Left | No Preferred Hand | Right | Right | Right / Left | Right / Left | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | Right | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
| Nose R | 0.2 ～ 0.4 | 0.2 ～ Others | Others | 0.2 ～ 0.8 | 0.2 ～ Others | 0.2 ～ Others | 0.2 ～ Others | 0.2 ～ Others | 0.4 ～ 0.8 | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.2 ～ Others | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.2 ～ 0.8 | 0.2 ～ 0.8 | 0.2 ～ Others | 0.2 ～ Others | 0.4 ～ 0.8 | Others | Others | Others | Others | - | 0.2 ～ Others | - | Others | 0.2 ～ Others | Others | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.8 ～ 1.2 | 0.8 ～ 1.2 |
| Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | Major Diameter | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Parting) | 2 ～ 6 | 0.5 ～ 4.8 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 4 | 2 ～ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | General-purpose 60° | - | - | - | - | - | - | Unified 60° / General-purpose 60° / Wit 55° / General-purpose 55° / Pipe Taper 55° / American Pipe 60° / Trapezoidal 30° | - | - | - | - | - | - | - | - | - | - | - |
| No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ～ 28 | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 ～ 3 | 3.5～5 | - | - | - | - | - | - | 0.5–1.5 ～ 4 | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond)
- D (55° Diamond)
- R (Round)
- S (Square)
- T (Triangular)
- V (35° Diamond)
- W (Hexagonal)
- Others
-
Use
- Outer Diameter / Inner Diameter
- Grooving / Parting
- Tapping
- Other
-
No. of Usable Corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
- High-Hardness Material
-
Breaker Application
- Finish
- Medium Cutting
- Medium - Heavy Cutting
- Heavy Cutting
- Light Cutting
-
Rake Angle
- Negative
- Positive
-
Preferred Hand
-
Nose R
-
Outer Diameter / Inner Diameter (For Tapping)
-
Metric / Inch
- metric
-
Groove Width (For Grooving / Parting)
-
Thread Type (For Tapping)
-
No. of Teeth (For Tapping)
-
Pitch (For Tapping)
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- KYOCERA (241)
- SUMITOMO ELEC (14)
- DAISHOWASEIKI (8)
- SANWASEISAKUSYO (4)
- SANDVIK (3)
- OSG (2)
- DIJET (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy