(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : Others, R (Round)
•Use : Other
•Preferred Hand : No Preferred Hand
•Nose R : 1.6, Others
For complete product overview and details on For Bearing Machining, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55° / Diamond 75°, Negative
KYOCERA
•Shape : D (55° Diamond), Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 55° / Diamond 75°, Negative, see the sections below:
Days to Ship: | 9 Days or more |
---|
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•Rake Angle: Negative
•Preferred Hand: No Preferred Hand
•rε: -
Days to Ship: | 9 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 35°, Negative
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Preferred Hand : No Preferred Hand
For complete product overview and details on For Extra Hard Roll Forming, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, High-Hardness Material
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on For Lathe Turning, see the sections below:
Days to Ship: | 9 Days or more |
---|
Diamond Shape 55° / Positive CBN
KYOCERA
DCMW
For complete product overview and details on Diamond Shape 55° / Positive CBN see the sections below:
Days to Ship: | 9 Days or more |
---|
60° Triangle Positive (No Hole) CBN
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive (No Hole) CBN, see the sections below:
Days to Ship: | 10 Days or more |
---|
For Deep Grooving (1 Corner Type) CBN
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on For Deep Grooving (1 Corner Type) CBN, see the sections below:
Days to Ship: | 9 Days or more |
---|
Diamond for Deep Grooving (1 Corner Specification)
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond for Deep Grooving (1 Corner Specification), see the sections below:
Days to Ship: | 9 Days or more |
---|
Aluminum Wheel (1-Corner Specifications), Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Aluminum Wheel (1-Corner Specifications), Diamond, see the sections below:
Days to Ship: | 11 Days or more |
---|
Days to Ship: | 9 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP For Finishing with Wiper Edge, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing", see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting", see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○HQ/CNGG12○○HQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CQ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○CQ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CJ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○CJ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V for Intermediate Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting", see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PT for Intermediate to Rough Cutting / High-Feed, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ for Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ for Rough Cutting, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ for Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH for Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH for Rough Cutting, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH for Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM12○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM16○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM19○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XP "for Finishing" for Mild Steel
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XP for Finishing for Mild Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XQ for Intermediate Cutting for Mild Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS "for Rough Cutting" for Mild Steel
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS for Rough Cutting for Mild Steel, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○MFP-SK for Finishing to Intermediate Cutting Sharp Edge / Mirror Finish, see the sections below:
Days to Ship: | 9 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○FP-TK for Intermediate to Rough Cutting Sharp Edge / Mirror Finish, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V "for Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XP "for Finishing" for Mild Steel | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS "for Rough Cutting" for Mild Steel | ||||||||||||||||||||||||||
Days to Ship | 11 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 11 Days or more | 9 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 9 Days or more | 8 Days or more |
Shape | T (Triangular) | R (Round) / Others | D (55° Diamond) / Others | R (Round) | T (Triangular) | V (35° Diamond) | Others | Others | D (55° Diamond) | T (Triangular) | Others | Others | Others | S (Square) / T (Triangular) / Others | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) |
Use | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Grooving / Parting | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | 3 | - | - | - | - | - | - | - | 1 / 2 | 1 / 3 | 1 | 1 | 1 | 1 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 |
Work Material | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | - | Cast Iron / High-Hardness Material | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Cast Iron / High-Hardness Material | Cast Iron / High-Hardness Material | Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / High-Hardness Material | Cast Iron / High-Hardness Material | High-Hardness Material | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron | Steel | Steel | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Stainless Steel | Stainless Steel |
Breaker Application | Medium Cutting | - | - | - | - | - | - | - | - | - | - | - | - | - | Finish | Medium Cutting | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Finish | Medium Cutting | Heavy Cutting | Medium Cutting | Medium - Heavy Cutting |
Rake Angle | Positive | - | Negative | Negative | Negative | Negative | - | - | Positive | Positive | Positive | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
Nose R | 0.2 ~ Others | 1.6 ~ Others | 0.4 ~ 1.6 | - | 0.4 ~ 1.2 | 0.4 ~ 1.2 | - | Others | 0.2 ~ 1.2 | 0.2 ~ 0.8 | 0.2 ~ 0.4 | 0.2 | Others | 0.2 ~ 0.4 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.2 ~ 1.2 | 0.4 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 1.2 ~ 1.6 | 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.6 | 1.2 ~ 1.6 | 0.8 ~ 1.2 | 0.4 ~ 1.6 | 0.8 ~ 1.2 | 1.2 ~ 1.6 | 0.8 ~ 1.6 | 0.8 ~ 1.6 | 0.8 ~ Others | 0.8 ~ 1.6 | 0.8 ~ 1.6 | 0.8 ~ Others | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.8 | Others | 0.4 ~ 0.8 |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy