(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Grooving Tip GBA32/GBA43
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Grooving Tip GBA32/GBA43, see the sections below:
Days to Ship: | 7 Days or more |
---|
Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Threading Tool Holder KTT Type, Compatible Chip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Threading Tool Holder KTT Type, Compatible Chip, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○L/R-ST Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
•No. of Usable Corners : 6~6
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-B Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○-C Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBET
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VCGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Diamond Shape 35° / Positive with Hole VCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 80° Hexagon Type Positive with Hole WBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 70° / Positive with Hole JCET/JCGT
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Diamond Shape 70° / Positive with Hole JCET/JCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Hexagonal Type, 80°, Positive CBN
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : Left
For complete product overview and details on Hexagonal Type, 80°, Positive CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
For Grooving (1 Corner Type) CBN
KYOCERA
•No. of Usable Corners : 1~1
•Nose R : 0.2~0.2
For complete product overview and details on For Grooving (1 Corner Type) CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
•Nose R : 0.2, Others
For complete product overview and details on Lathe Turning (1-Corner Specification) Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond for Groove Insertion and Horizontal Feeding
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Diamond for Groove Insertion and Horizontal Feeding, see the sections below:
Days to Ship: | 8 Days or more |
---|
KTKF Type/KTKF Type Space Holder Conforming Tip
KYOCERA
The right-handed (R) holder conforms to right-handed (R) tips while the left-handed (L) holder conforms to left-handed (L) tips.
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○R/L-A3 for Finishing to Intermediate Cutting / Sharp Edge for Aluminum / Nonferrous Metals, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-25R for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ for Finishing to Intermediate Cutting for Aluminum / Nonferrous Metals, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○-S "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○-S for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○ "for Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○ for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNGG0903○○-B "Finishing to Semi-Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG0903○○-B Finishing to Semi-Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNGG1204○○-C "Semi to Rough"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG1204○○-C Semi to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-C "Semi to Rough"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-C Semi to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNGG1204○○-25R "Semi to Rough", Low Resistance
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG1204○○-25R Semi to Rough, Low Resistance, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG1604○○ "Finishing to Medium" Aluminum Nonferrous
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG1604○○ Finishing to Medium Aluminum Nonferrous, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG11○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG11○○-S Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-S Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNEG1604○○-SSF "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNEG1604○○-SSF Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG11○○-B "Finishing to Medium"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG11○○-B Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-C Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG22○○-C Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-25R "Medium to Rough" Low-Resistance
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-25R Medium to Rough Low-Resistance, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNGG○○-S "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 80° Hexagon Type Negative with Hole WNGG○○-S Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNGG○○ "Medium Cutting"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 80° Hexagon Type Negative with Hole WNGG○○ Medium Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCET for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCET Low-Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT Low-Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Outer Diameter Threading Tool Holder KTT Type, Compatible Chip | 60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium" | 60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough" | Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○-S "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNGG11○○ "for Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNGG15○○ "for Intermediate Cutting" | Square 90°, Negative, with Hole SNGG0903○○-B "Finishing to Semi-Finishing" | Square 90°, Negative, with Hole SNGG1204○○-C "Semi to Rough" | Square 90°, Negative, with Hole SNMG1204○○-C "Semi to Rough" | Square 90°, Negative, with Hole SNGG1204○○-25R "Semi to Rough", Low Resistance | 60° Triangle Negative with Hole TNGG1604○○ "Finishing to Medium" Aluminum Nonferrous | 60° Triangle Negative with Hole TNGG11○○-B "Finishing to Medium" | 60° Triangle Negative with Hole TNGG16○○-C "Medium to Rough" | 60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough" | 60° Triangle Negative with Hole TNGG16○○-25R "Medium to Rough" Low-Resistance | Turning Insert Diamond 35°, Negative, with Hole, VNGG1604○○R/L "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed" | ||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Shape | V (35° Diamond) | C (80° Diamond) | Others | Others | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | Others | W (Hexagonal) | Others | Others | Others | Others | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) | S (Square) | S (Square) | S (Square) | S (Square) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | W (Hexagonal) | W (Hexagonal) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) |
Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | 2 | 2 | - | - | - | 3 | 6 | 6 | 6 | 2 | 2 | 3 | 2 | 1 | 1 | 1 | 1 | - | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 8 | 8 | 8 | 8 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 4 | 6 | 6 | 2 | 2 | 2 |
Work Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | Finish / Medium Cutting | Finish | - | - | - | Finish | Medium - Heavy Cutting | Medium Cutting | Heavy Cutting | Finish | Medium Cutting | Finish | Finish | - | - | - | - | - | Medium Cutting | Finish | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Finish | Finish | Finish | Medium Cutting | Heavy Cutting | Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Finish | Medium Cutting | Finish | Medium Cutting | Medium Cutting |
Rake Angle | Positive | Positive | - | - | - | Positive | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | - | - | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Positive |
Preferred Hand | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left | Left |
Nose R | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | Others | 0.2 ~ Others | 0.2 ~ Others | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | Others | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.4 | 0.2 | Others | Others | Others | 0.4 ~ 0.8 | 0.2 | 0.4 ~ 0.8 | 0.4 | 0.4 | 0.4 ~ 0.8 | 0.2 ~ 0.4 | 0.4 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ 0.4 | 0.2 ~ 0.4 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ 0.4 | 0.4 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | 0.5 ~ 4.8 | 1 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy