(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive with Hole TPMT Medium Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TPGB
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TPGB, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 55° / Positive CBN
KYOCERA
DCMW
For complete product overview and details on Diamond Shape 55° / Positive CBN see the sections below:
Days to Ship: | 8 Days or more |
---|
Inner Diameter Thread Cutting Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : 0.2, Others
For complete product overview and details on Inner Diameter Thread Cutting Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-CK "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-CK for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT, for Finishing to Intermediate Cutting Stainless Steel, Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPGN No Breaker Cast Iron, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TBGT "Fine Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, Others
For complete product overview and details on 60° Triangle Positive with Hole TBGT Fine Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive without Hole TPMR "Medium Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive without Hole TPMR Medium Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBMT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBET
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBET, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VCGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Diamond Shape 35° / Positive with Hole VCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 80° Hexagon Type Positive with Hole WBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive, CBN Diamond TPGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive, CBN Diamond TPGW, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive CBN Diamond VBGW
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive DCMT
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive DCMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TCGW, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive VBMT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive VBMT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Inner Diameter Thread Cutting Tip 11IR/L○○ISO
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 11IR/L○○ISO, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 70° / Positive with Hole JCET/JCGT
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Diamond Shape 70° / Positive with Hole JCET/JCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Round, Positive, with Hole RCGX/RCMX
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•No. of Usable Corner: 9 or more
•Rake Angle: Positive
•Breaker Application: Medium Cutting
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Pozidriv, see the sections below:
Days to Ship: | 8 Days or more |
---|
Hexagonal Type, 80°, Positive CBN
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : Left
For complete product overview and details on Hexagonal Type, 80°, Positive CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive (No Hole) CBN
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive (No Hole) CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
For Deep Grooving (1 Corner Type) CBN
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on For Deep Grooving (1 Corner Type) CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
•Nose R : 0.2, Others
For complete product overview and details on Lathe Turning (1-Corner Specification) Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
System Bar Diamond for Small Bores
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Right
For complete product overview and details on System Bar Diamond for Small Bores, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Minute Incision, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT for Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT for Finishing to Intermediate Cutting Stainless Steel, Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCET for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCET Low-Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT Low-Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT○○AH for Finishing to Intermediate Cutting Aluminum, Nonferrous Metals, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | Turning Insert Diamond 55°, Positive, with Hole, DCGT○○-CK "for Finishing" | Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Minute Incision" | Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-GF "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT○○-CK "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○GK "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCMT "for Intermediate Cutting" | Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing" | Turning Insert Diamond 80°, Positive, with Hole, CCET "Low-Feed" | Turning Insert Diamond 80°, Positive, with Hole, CCGT "Low-Feed" | ||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Shape | V (35° Diamond) | C (80° Diamond) | C (80° Diamond) | T (Triangular) | T (Triangular) | D (55° Diamond) | T (Triangular) | D (55° Diamond) | T (Triangular) | D (55° Diamond) | D (55° Diamond) | S (Square) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | T (Triangular) | V (35° Diamond) | D (55° Diamond) | T (Triangular) | V (35° Diamond) | T (Triangular) | Others | R (Round) | T (Triangular) | S (Square) / T (Triangular) | W (Hexagonal) | T (Triangular) | Others | Others | Others | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) |
Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | 2 | 2 | 2 | 3 | 1 | 1 / 2 | 3 | 2 | 3 | 2 | 2 | 4 | 3 | 3 | 2 | 2 | 2 | 3 | 1 / 3 | 1 / 2 | 1 | 1 | 1 | 3 | 2 | 9 or more | 3 | - | 1 | 1 / 3 | 1 | 1 | 1 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Work Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | Cast Iron / High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / High-Hardness Material | High-Hardness Material | High-Hardness Material | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel | Stainless Steel | Stainless Steel | Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | Finish / Medium Cutting | Finish | Medium Cutting | Medium Cutting | - | - | - | Medium Cutting | Finish | Finish | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Finish / Medium Cutting | Finish | Medium Cutting | Finish | - | - | - | - | - | - | Finish | Medium Cutting | Medium Cutting | - | - | - | - | - | - | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting | Medium Cutting |
Rake Angle | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive |
Preferred Hand | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left / No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | No Preferred Hand |
Nose R | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ 1.2 | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ 1.2 | 0.2 ~ Others | 0.4 ~ 0.8 | 0.2 ~ Others | 0.4 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ 0.4 | 0.2 ~ Others | Others | 0.2 ~ Others | - | 0.2 ~ Others | 0.4 ~ 1.2 | 0.2 ~ 0.4 | 0.2 ~ 0.8 | 0.2 ~ 0.4 | 0.2 | 0.2 | Others | Others | Others | Others | 0.2 ~ 1.2 | 0.2 ~ Others | 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | 0.4 ~ 0.8 |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3 ~ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | Unified 60° / General-purpose 60° / Wit 55° / General-purpose 55° / Pipe Taper 55° / American Pipe 60° / Trapezoidal 30° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | 8 ~ 28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | 0.5–1.5 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy