(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive with Hole TPMT Medium Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Threading Tool Holder KTT Type, Compatible Chip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Threading Tool Holder KTT Type, Compatible Chip, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive without Hole TPGR○○-B "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Positive without Hole TPGR○○-B Medium Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond Negative
KYOCERA
•Shape : C (80° Diamond), D (55° Diamond), T (Triangular), V (35° Diamond), W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond Negative, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○XS "Rough Cutting" Mild Steel
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○XS Rough Cutting Mild Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNGG1604○○ "Finishing to Medium" Aluminum Nonferrous
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG1604○○ Finishing to Medium Aluminum Nonferrous, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGB without Breaker "Cast Iron"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGB without Breaker Cast Iron, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive without Hole TPMR "Medium Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive without Hole TPMR Medium Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive without Hole TPGN without Breaker "Cast Iron"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive without Hole TPGN without Breaker Cast Iron, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TCMT
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TCMT, see the sections below:
Days to Ship: | 11 Days or more |
---|
Inner Diameter Thread Cutting Tip 11IR/L○○ISO
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 11IR/L○○ISO, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Thread Cutting Tip 22ER/L○○60
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Outer Diameter Thread Cutting Tip 22ER/L○○60, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive, with Hole / No Hole TCGN/TCGR/TCGW, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Pozidriv, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond), R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•No. of Usable Corners : 4~8
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Negative (Solid) CBN, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Positive (No Hole) CBN
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive (No Hole) CBN, see the sections below:
Days to Ship: | 10 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Inner Diameter Thread Cutting Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : 0.2, Others
For complete product overview and details on Inner Diameter Thread Cutting Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○PP "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PP Finishing, see the sections below:
Days to Ship: | 10 Days or more |
---|
60° Triangle Negative with Hole TNMG○○GP "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○PQ "Finishing to Medium"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PQ Finishing to Medium, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG11○○HQ "Finishing to Medium"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate Cutting
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○HQ "Finishing to Medium"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○HQ Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○CQ "Finishing to Medium Raised"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○CQ Finishing to Medium Raised, see the sections below:
Days to Ship: | 10 Days or more |
---|
60° Triangle Negative with Hole TNMG22○○CQ "Finishing to Medium Raised"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG22○○CQ Finishing to Medium Raised, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG11○○GS "Medium to Rough"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○GS "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○GS Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○PS "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PS Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG22○○PS "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG22○○PS Medium to Rough, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○PT "Medium to Rough High Feed"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PT Medium to Rough High Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○GT "Medium to Rough High Feed"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○GT Medium to Rough High Feed, see the sections below:
Days to Ship: | 9 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○ "Rough Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○ Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG22○○ "Rough Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG22○○ Rough Cutting, see the sections below:
Days to Ship: | 10 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○PH "Rough Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PH Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG22○○PH "Rough Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG22○○PH Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMM16○○PX "Single Surface/Rough Cutting High Feed"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMM16○○PX Single Surface/Rough Cutting High Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMM22○○PX "Single Surface/Rough Cutting High Feed"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMM22○○PX Single Surface/Rough Cutting High Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○XP "Finishing" Mild Steel
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○XP Finishing Mild Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
60° Triangle Negative with Hole TNMG16○○XQ "Medium Cutting" Mild Steel
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○XQ Medium Cutting Mild Steel, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on 60° Triangle Negative with Hole TNGG1604○○MFP-SK Medium to Finishing Sharp Edge and Mirror Surface Specification, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNGG1604○○FP-TK Medium to Rough Sharp Edge and Mirror Surface Specification, see the sections below:
Days to Ship: | 9 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○TK Medium to Rough Sharp Edge Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 11 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Outer Diameter Threading Tool Holder KTT Type, Compatible Chip | 60° Triangle Positive without Hole TPGR○○-B "Medium Finishing" | 60° Triangle Negative with Hole TNMG16○○XS "Rough Cutting" Mild Steel | 60° Triangle Negative with Hole TNGG1604○○ "Finishing to Medium" Aluminum Nonferrous | 60° Triangle Positive with Hole TPGB without Breaker "Cast Iron" | 60° Triangle Positive without Hole TPGN without Breaker "Cast Iron" | S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip | 60° Triangle Negative with Hole TNMG16○○PQ "Finishing to Medium" | 60° Triangle Negative with Hole TNMG11○○HQ "Finishing to Medium" | 60° Triangle Negative with Hole TNMG16○○HQ "Finishing to Medium" | 60° Triangle Negative with Hole TNMG16○○CQ "Finishing to Medium Raised" | 60° Triangle Negative with Hole TNMG22○○CQ "Finishing to Medium Raised" | 60° Triangle Negative with Hole TNMG11○○GS "Medium to Rough" | 60° Triangle Negative with Hole TNMG16○○GS "Medium to Rough" | 60° Triangle Negative with Hole TNMG16○○PS "Medium to Rough" | 60° Triangle Negative with Hole TNMG22○○PS "Medium to Rough" | 60° Triangle Negative with Hole TNMG16○○PT "Medium to Rough High Feed" | 60° Triangle Negative with Hole TNMG16○○GT "Medium to Rough High Feed" | 60° Triangle Negative with Hole TNMM16○○PX "Single Surface/Rough Cutting High Feed" | 60° Triangle Negative with Hole TNMM22○○PX "Single Surface/Rough Cutting High Feed" | 60° Triangle Negative with Hole TNMG16○○XP "Finishing" Mild Steel | 60° Triangle Negative with Hole TNMG16○○XQ "Medium Cutting" Mild Steel | |||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 9 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 9 Days or more | 11 Days or more |
Shape | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) |
Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Tapping | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | - | 3 | 3 | - | 3 | 1 | 6 | 6 | 3 | 3 | 3 | 1 | 3 | 3 | 3 | - | 6 | 1 / 3 | 1 | 3 | - | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 3 | 3 | 6 | 6 | 6 | 6 | 6 |
Work Material | Cast Iron / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / High-Hardness Material | - | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Cast Iron | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Stainless Steel | Stainless Steel | Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | - | Medium Cutting | Finish | - | Medium Cutting | - | Heavy Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | - | - | - | Medium Cutting | - | - | - | - | - | - | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Finish | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting |
Rake Angle | Negative | Positive | Positive | - | Positive | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Positive | Negative | Positive | - | Positive | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
Nose R | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ 1.2 | 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.2 ~ Others | Others | Others | 0.2 ~ Others | 0.4 ~ 0.8 | 0.8 | 0.2 ~ 0.8 | - | 0.2 ~ Others | Others | 0.2 ~ 1.2 | 0.2 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.6 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ Others | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.6 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | Others | 0.4 ~ 0.8 | 0.4 ~ 0.8 |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | Major Diameter | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | General-purpose 60° | - | - | - | - | - | Unified 60° / General-purpose 60° / Wit 55° / General-purpose 55° / Pipe Taper 55° / American Pipe 60° / Trapezoidal 30° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ~ 28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2 | 3.5~5 | - | - | - | - | - | 0.5–1.5 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy