(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
KYOCERA
•Shape : C (80° Diamond), R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•No. of Usable Corners : 4~8
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Negative (Solid) CBN, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-PS "Semi to Rough"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-PS Semi to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNGA1204○○ No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNGA1204○○ No Breaker Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○ "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○ Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Pozidriv, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-PQ Finishing to Semi-Finishing, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-HQ "Finishing to Semi-Finishing"
KYOCERA
[Specifications]
· Shape: S (Square)
· Number of Usable Corners: 8
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate Cutting
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-PT "Semi to Rough / High-Feed"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-PT Semi to Rough / High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG0903○○ "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG0903○○ Rough Cutting, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-PH "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-PH Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG15○○-PH "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG15○○-PH Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG19○○-PH "Rough Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative, with Hole SNMG19○○-PH Rough Cutting, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMM12○○PX "Single-Sided / Rough Cutting, High-Feed"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMM12○○PX Single-Sided / Rough Cutting, High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMM15○○PX "Single-Sided / Rough Cutting, High-Feed"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMM15○○PX Single-Sided / Rough Cutting, High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMM19○○PX "Single-Sided / Rough Cutting, High-Feed"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative, with Hole SNMM19○○PX Single-Sided / Rough Cutting, High-Feed, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-XP "Finishing", Soft Steel
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-XP Finishing, Soft Steel, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-XQ "Semi-Cutting", Soft Steel
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-XQ Semi-Cutting, Soft Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-XS "Rough Cutting", Soft Steel
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-XS Rough Cutting, Soft Steel, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-MQ Finishing to Semi-Finishing, Stainless Steel / Heat-Resistant Alloys, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-MS "Semi to Rough", Stainless Steel / Heat-Resistant Alloys
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-MS Semi to Rough, Stainless Steel / Heat-Resistant Alloys, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-C "Rough Cutting", Cast Iron
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-C Rough Cutting, Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-ZS "Rough Cutting", Cast Iron
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-ZS Rough Cutting, Cast Iron, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole / without Hole SNMG1204○○-GC "Rough Cutting", Cast Iron
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole / without Hole SNMG1204○○-GC Rough Cutting, Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNMA1204○○ No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative, with Hole SNMA1204○○ No Breaker Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative, with Hole SNGG0903○○-B "Finishing to Semi-Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG0903○○-B Finishing to Semi-Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNGG1204○○-C "Semi to Rough"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG1204○○-C Semi to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG1204○○-C "Semi to Rough"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNMG1204○○-C Semi to Rough, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Negative, with Hole SNGG1204○○-25R "Semi to Rough", Low Resistance
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Negative, with Hole SNGG1204○○-25R Semi to Rough, Low Resistance, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, with Hole SCMT Finishing to Semi-Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Positive, with Hole SPGH "Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left
For complete product overview and details on Square 90°, Positive, with Hole SPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Positive, without Hole SPMR "Semi-Cutting"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPMR Semi-Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Positive, without Hole SPGR "Finishing"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
For complete product overview and details on Square 90°, Positive, without Hole SPGR Finishing, see the sections below:
Days to Ship: | 10 Days or more |
---|
Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPGN No Breaker Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Positive, without Hole SPMN No Breaker "Cast Iron"
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Positive, without Hole SPMN No Breaker Cast Iron, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative SNGA, see the sections below:
Days to Ship: | 10 Days or more |
---|
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Square 90°, Negative SNGN, see the sections below:
Days to Ship: | 11 Days or more |
---|
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative SNMN, see the sections below:
Days to Ship: | 11 Days or more |
---|
Square 90°, Negative CBN Diamond SNGA
KYOCERA
[Specifications]
· Shape: S (Square)
· Number of Usable Corners: 2
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
Days to Ship: | 11 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive SPGN
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive SPGN, see the sections below:
Days to Ship: | 11 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Square 90°, Negative, with Hole SNMG1204○○-PS "Semi to Rough" | Square 90°, Negative, with Hole SNGA1204○○ No Breaker "Cast Iron" | Square 90°, Negative, with Hole SNMG1204○○-PQ "Finishing to Semi-Finishing" | Square 90°, Negative, with Hole SNMG1204○○-HQ "Finishing to Semi-Finishing" | Square 90°, Negative, with Hole SNMG1204○○-PT "Semi to Rough / High-Feed" | Square 90°, Negative, with Hole SNMM12○○PX "Single-Sided / Rough Cutting, High-Feed" | Square 90°, Negative, with Hole SNMM15○○PX "Single-Sided / Rough Cutting, High-Feed" | Square 90°, Negative, with Hole SNMM19○○PX "Single-Sided / Rough Cutting, High-Feed" | Square 90°, Negative, with Hole SNMG12○○-XP "Finishing", Soft Steel | Square 90°, Negative, with Hole SNMG12○○-XQ "Semi-Cutting", Soft Steel | Square 90°, Negative, with Hole SNMG12○○-XS "Rough Cutting", Soft Steel | Square 90°, Negative, with Hole SNMG12○○-MS "Semi to Rough", Stainless Steel / Heat-Resistant Alloys | Square 90°, Negative, with Hole SNMG1204○○-C "Rough Cutting", Cast Iron | Square 90°, Negative, with Hole SNMG1204○○-ZS "Rough Cutting", Cast Iron | Square 90°, Negative, with Hole / without Hole SNMG1204○○-GC "Rough Cutting", Cast Iron | Square 90°, Negative, with Hole SNMA1204○○ No Breaker "Cast Iron" | Square 90°, Negative, with Hole SNGG0903○○-B "Finishing to Semi-Finishing" | Square 90°, Negative, with Hole SNGG1204○○-C "Semi to Rough" | Square 90°, Negative, with Hole SNMG1204○○-C "Semi to Rough" | Square 90°, Negative, with Hole SNGG1204○○-25R "Semi to Rough", Low Resistance | Square 90°, Positive, with Hole SCMT "Finishing to Semi-Finishing" | Square 90°, Positive, without Hole SPGN No Breaker "Cast Iron" | Square 90°, Positive, without Hole SPMN No Breaker "Cast Iron" | |||||||||||||||||
Days to Ship | 10 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 11 Days or more |
Shape | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) | S (Square) |
Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | 8 | 8 | 8 | 1 | 8 | - | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 4 | 4 | 4 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 8 | 4 | 4 | 4 | 4 | 4 | 4 | - | - | - | 2 | 1 |
Work Material | - | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Cast Iron | Steel | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / High-Hardness Material | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Cast Iron | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy |
Breaker Application | - | Medium - Heavy Cutting | Medium Cutting | - | Medium Cutting | - | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Finish | Medium Cutting | Heavy Cutting | Medium Cutting | Medium - Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Finish | Medium Cutting | Medium Cutting | - | - | - | - | - |
Rake Angle | Negative | Negative | Negative | - | Negative | Positive | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | Negative | Negative | Negative | Negative | Positive |
Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | Right / Left | No Preferred Hand | Left | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
Nose R | 0.8 ~ Others | 0.8 ~ 1.6 | 0.4 ~ 0.8 | - | 0.4 ~ Others | 0.8 ~ 1.2 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ 0.8 | 0.8 ~ 1.6 | 1.2 ~ 1.6 | 1.2 ~ 1.6 | 0.8 ~ 1.2 | 1.2 | 1.2 ~ Others | 0.8 | 0.8 | 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.6 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.8 ~ 1.2 | 0.4 ~ Others | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 | 0.4 ~ 0.8 | 0.4 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.8 ~ 1.6 | 0.4 ~ Others | 1.6 | 0.4 ~ 1.2 | 0.4 |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy