(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
KYOCERA Turning Inserts（Use：Outer Diameter / Inner Diameter Page3）
| Days to Ship |
|
|---|
-
60° Triangle Positive (No Hole) CBN
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive (No Hole) CBN, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
System Bar Diamond for Small Bores
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Right
For complete product overview and details on System Bar Diamond for Small Bores, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP For Finishing with Wiper Edge, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting", see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○HQ/CNGG12○○HQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CQ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○CJ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○CJ For Finishing to Intermediate Cutting / Pull-Up, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PT for Intermediate to Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PT for Intermediate to Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GT for Intermediate to Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH for Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM12○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM16○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMM19○○PX Single-Sided / for Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XQ for Intermediate Cutting for Mild Steel, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS "for Rough Cutting" for Mild Steel
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS for Rough Cutting for Mild Steel, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○MFP-SK for Finishing to Intermediate Cutting Sharp Edge / Mirror Finish, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MQ, for Finishing to Intermediate Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MU, for Intermediate to Rough Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ZS "for Rough Cutting" for Cast Iron
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ZS for Rough Cutting for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC "for Rough Cutting" for Cast Iron
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC for Rough Cutting for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNGA1204○○, without Breaker, for Cast Iron
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGA1204○○, without Breaker, for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMA1204○○, without Breaker, for Cast Iron
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMA1204○○, without Breaker, for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○AH for Intermediate to Rough Cutting / Sharp Edge for Aluminum / Nonferrous Metals, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S for Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG120404Z-TN60 for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing"
KYOCERA
[Specifications]
· Shape: D (55° Diamond)
· Number of Usable Corners: 4
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| Use |
| No. of Usable Corners |
| Work Material |
| Breaker Application |
| Rake Angle |
| Preferred Hand |
| Nose R |
| Outer Diameter / Inner Diameter (For Tapping) |
| Groove Width (For Grooving / Parting) |
| Thread Type (For Tapping) |
| No. of Teeth (For Tapping) |
| Pitch (For Tapping) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○TN-V "for Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○ "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○ "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG16○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG19○○PH "for Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○XS "for Rough Cutting" for Mild Steel | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○ZS "for Rough Cutting" for Cast Iron | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC "for Rough Cutting" for Cast Iron | Turning Insert Diamond 80°, Negative, with Hole, CNGA1204○○, without Breaker, for Cast Iron | Turning Insert Diamond 80°, Negative, with Hole, CNMA1204○○, without Breaker, for Cast Iron | Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNGG1204○○R/L-S "for Intermediate Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PP "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GP "for Finishing" | Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PQ "for Finishing to Intermediate Cutting" | ||||||||||||||||||
| Days to Ship | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
| Shape | T (Triangular) | Others | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | D (55° Diamond) |
| Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
| No. of Usable Corners | 1 / 3 | 1 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Work Material | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron | Steel / Cast Iron | Steel | Steel | Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Stainless Steel | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Cast Iron | Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel |
| Breaker Application | - | - | Finish | Medium Cutting | Finish | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Heavy Cutting | Medium Cutting | Heavy Cutting | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Heavy Cutting | Heavy Cutting | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Finish | Medium Cutting | Medium Cutting | Medium - Heavy Cutting | Finish | Finish | Medium Cutting |
| Rake Angle | Positive | Positive | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Preferred Hand | No Preferred Hand | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
| Nose R | 0.2 ～ 0.8 | 0.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.8 ～ 1.2 | 1.2 ～ 1.6 | 0.8 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 1.2 ～ 1.6 | 0.8 ～ 1.2 | 0.8 ～ 1.6 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 1.2 ～ 1.6 | 0.8 ～ 1.6 | 0.8 ～ 1.6 | 0.8 ～ Others | 0.8 ～ 1.6 | 0.8 ～ 1.6 | 0.8 ～ Others | 0.4 ～ 0.8 | 0.8 | Others | 0.4 ～ 0.8 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.2 ～ 0.4 | 0.4 ～ 0.8 | 0.4 ～ 0.8 | 0.4 | 0.2 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 |
| Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Shape
- C (80° Diamond)
- D (55° Diamond)
- R (Round)
- S (Square)
- T (Triangular)
- V (35° Diamond)
- W (Hexagonal)
- Others
-
Use
- Outer Diameter / Inner Diameter
- Grooving / Parting
- Tapping
- Other
-
No. of Usable Corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
- High-Hardness Material
-
Breaker Application
- Finish
- Medium Cutting
- Medium - Heavy Cutting
- Heavy Cutting
- Light Cutting
-
Rake Angle
- Negative
- Positive
-
Preferred Hand
-
Nose R
-
Outer Diameter / Inner Diameter (For Tapping)
-
Metric / Inch
- metric
-
Groove Width (For Grooving / Parting)
-
Thread Type (For Tapping)
-
No. of Teeth (For Tapping)
-
Pitch (For Tapping)
Narrow search by specifying Manufacturer
-
- MISUMI (1)
- KYOCERA (345)
- SANWASEISAKUSYO (4)
- SANDVIK (3)
- DIJET (1)
- OSG (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
- DAISHOWASEIKI (0)
- SUMITOMO ELEC (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy