(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Hitachi Metals Threaded Pipe Fittings & Flanges（Thread Nominal M1：2 1/2B(65A)）
| Days to Ship |
|
|---|
-
Pipe Fitting - Male and Female Elbow
Hitachi Metals
[Features]
· Pipe fitting manufactured from cold rolled steel plate (SPCC) are also available. A standard ‘Screwed Type Malleable Cast Iron Pipe Fitting’ as specified by JIS B 2301. We also manufacture some non-JIS standard products.
· The main material is Mareburu® (blackheart malleable cast iron). The threaded section has a tapered pipe thread. Hot-dip galvanized surface treatment is applied where the surface is processed.
· Hot-dip galvanization has been changed to a superior plating that reduces the environmental burden (RoSH compliant).
· Environmentally friendly: Lead and cadmium are significantly reduced.
· We use high-purity zinc metal that largely reduces the inclusion content of lead (Pb) and cadmium (Cd).
· Superior manufacturing method: No addition of new heavy metals is required.
· Mass production technology has been established by developing a unique production facility and preprocessing method. Heavy metals including bismuth (Bi) are used to replace of lead.
· Excellent performance: The appearance and performance is equivalent to conventional plated parts.
· Conforms to the specifications that are specified in JIS B 2301 (Screwed Type Malleable Cast Iron Pipe Fittings). The fitting has an exterior glossy plated finish—similar to the conventional products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 16 Days or more -
Hitachi Metals
A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Hitachi Metals
JIS B 2301. Hot dip galvanizing is an excellent plating with a low environmental load.
[Features]
· Environmentally friendly: Lead and cadmium are greatly reduced.
· Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
· Excellent manufacturing method: New heavy metal addition is not required.
· Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
· Excellent performance: Appearance and performance equivalent to conventional plated parts.
· Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Hitachi Metals
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Pipe Fitting with Sealant, WS Fitting, Union
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.
- Volume Discount
Days to Ship: 11 Days or more -
Hitachi Metals
JIS B 2301 screw-in type malleable cast iron fitting
[Features]
· Environmentally friendly: Lead and cadmium are greatly reduced.
· Uses high purity zinc metal to reduce lead (Pb) and cadmium (Cd) content significantly.
· Excellent manufacturing method: New heavy metal addition is not required.
· Development of original manufacturing facilities and preprocessing methods has established the technology for mass production, and heavy metals such as bismuth (Bi) are used instead of lead.
· Excellent performance: Appearance and performance equivalent to conventional plated parts.
· Satisfies the specifications stipulated in JIS B 2301 (Screw type malleable cast iron pipe fittings), and has a glossy plating on the outside similar to that of conventional products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Pipe End Anti Corrosive Pipe Joint, 5K Flange
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
- Volume Discount
Days to Ship: 14 Days or more -
Hitachi Metals
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
- Volume Discount
Days to Ship: 9 Days or more -
Hitachi Metals
Usable fluids are sewage, effluents, ventilated air, and rainwater. The materials, shapes, dimensions, and precision conform to the Japanese Industrial Standards (JIS B 2303 Screwed drainage fittings).
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A JIS B 2301 screw-in type malleable cast iron fitting. Hot-dip zinc plating is excellent for reducing the environmental burden.
[Features]
· A standard ‘Screwed Type Malleable Cast Iron Pipe Fitting’ as specified by JIS B 2301. We also manufacture some non-JIS standard products.
· The main material is Mareburu® (blackheart malleable cast iron). The threaded section has a tapered pipe thread. Hot-dip galvanized surface treatment is applied where the surface is processed.
· Hot-dip galvanization has been changed to a superior plating that reduces the environmental burden (RoSH compliant).
· Environmentally friendly: Lead and cadmium are significantly reduced.
· We use high-purity zinc metal that largely reduces the inclusion content of lead (Pb) and cadmium (Cd).
· Superior manufacturing method: No addition of new heavy metals is required.
· Mass production technology has been established by developing a unique production facility and preprocessing method. Heavy metals including bismuth (Bi) are used to replace of lead.
· Excellent performance: The appearance and performance is equivalent to conventional plated parts.
· Conforms to the specifications that are specified in JIS B 2301 (Screwed Type Malleable Cast Iron Pipe Fittings). The fitting has an exterior glossy plated finish—similar to the conventional products.- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Hitachi Metals
A plumbing fitting that uses screw connection for steel pipes with small to medium diameter; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A plumbing fitting that uses a screw connection for steel pipes with small to medium diameters; JIS B 2301 specifies it as "screwed type malleable cast iron pipe fitting". Hot zinc plating reduces environmental burden.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Pipe Fittings - Three-way Reducing T
Hitachi Metals
A small to medium diameter steel pipe fitting that uses screw connection; JIS B 2301 specifies it as "screw-in type malleable cast iron pipe fitting". Hot dip galvanizing reduces impact on the environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Tube Fitting Different Diameter T
Hitachi Metals
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A plumbing fitting that uses screw connection for steel pipes with a small to medium diameter; JIS B 2301 describes it as a "screw-type, malleable, cast iron pipe fitting." Hot zinc plating reduces the environmental impact.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 11 Days or more -
Hitachi Metals
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A plumbing fitting that uses a screw connection for small/medium-diameter steel pipes. Follows JIS B 2301 specification for a screw-type malleable cast iron pipe fitting. Hot zinc plating reduces effect on environment.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Hitachi Metals
A tube fitting bushing—manufactured by Hitachi Metals Ltd., with a track record in Japan for top-class quality screw fittings/pipe components.
-Working fluid: water, air, steam, gas, oil
-Surface treatment: as-cast, galvanized- Volume Discount
- CAD ：
- 2D
Days to Ship: 8 Days or more -
Pipe End Anti-Corrosion Pipe Fittings Elbow
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Corrosion Resistant Pipe End Fitting T
Hitachi Metals
By integral molded polyolefin resin visceral core, hide the iron land exposed portion of the tube end of the screw back and lining steel pipes from the fluid, and provide an excellent anti-corrosion effect. It is easy to construct management because it is integrally molded.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Pipe End Corrosion Prevention Fitting Socket
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Pipe End Anti-Corrosion Fitting, Union
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more -
Corrosion-Free Pipe End Fittings - Plug
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Pipe End Anti Corrosive Pipe Joint, 10K Flange
Hitachi Metals
The integral molded polyolefin resin visceral core keeps the interior thread and exposed metal edges of lined steel pipes away from fluid and ensures against corrosion. Integrally molded for easy construction and management.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Pipe End Anti-Corrosion Fitting, Nipple
Hitachi Metals
An integrally molded polyolefin resin internal core shields the screwhead or the exposed iron-earth section of the end of the steel pipe lining from fluid and provides an excellent anti-corrosive effect. It is easy to manage thanks to its integral molding.
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Days to Ship: 8 Days or more -
Pipe Fitting with Sealant WS Fitting Elbow
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 12 Days or more -
Pipe Fitting with Sealant WS Fitting 45° Elbow
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 9 Days or more -
Pipe Fitting with Sealant, WS Fitting, Socket
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.
- Volume Discount
Days to Ship: 9 Days or more -
Pipe Fittings with Sealant, WS Fittings, T
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 9 Days or more -
Pipe Fitting with Sealing Agent WS Fitting Cross
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. No need to wrap sealing tape around the threaded section of connecting pipes for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, reducing piping work.
- Volume Discount
Days to Ship: 10 Days or more -
Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. The wrapping of sealing tape around the threaded section of the connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 9 Days or more -
Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow
Hitachi Metals
The female fitting screws are coated with a fluororesin pre-coat sealant. Wrapping sealing tape around the male threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealant has a lubricating effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 9 Days or more -
Pipe Fitting with Sealant, WS Fitting, Bushing
Hitachi Metals
Fitting screws are coated with fluororesin pre-coated sealant. Wrapping sealing tape around the threaded section of connecting pipes is not required for nominal 4B or below. The fluorine-based sealing agent has a lubrication effect, and therefore reduces the burden of piping work.
- Volume Discount
Days to Ship: 10 Days or more -
Hitachi Metals
Use the HB fitting for coupling feed water pipes, piping connected water supplies, transporting fire extinguishing equipment with inert gases (carbon dioxide), and other piping subject to Schedules 40 and 80 of JIS G 3454, carbon steel tube for pressure services.
- Volume Discount
Days to Ship: 12 Days or more -
Hitachi Metals
Use the HB fitting for coupling feed water pipes, piping for connected water supply and fire extinguishing equipment carrying inert gas (carbon dioxide) and other piping subject to Schedules 40 and 80 of JIS G 3454, "Carbon steel tube for pressure service."
- Volume Discount
Days to Ship: 9 Days or more -
90° Long Radius Drainage Fitting
Hitachi Metals
Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).
- Volume Discount
- CAD ：
- 2D
Days to Ship: 9 Days or more -
Hitachi Metals
Works with sewage, effluents, ventilated air, and rainwater. Materials, shape, dimensions, and precision conform to Japanese Industrial Standard JIS B 2303 (screwed drainage fittings).
- Volume Discount
- CAD ：
- 2D
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Material |
| Max. Operating Pressure(MPa) |
| Connection Type |
| Connecting Shape |
| Types of Screw 3 (When Different Dia. or Different Type Screw) |
| Connection Thread Type M1 |
| Nominal of Thread 3(Different Diameters or Different Type Screw) |
| Connection Thread Type M2 |
| Types of Screw 4 (When Different Dia. or Different Type Screw) |
| Thread Nominal M1 |
| Nominal of Thread 4(Different Diameters or Different Type Screw) |
| Thread Nominal M2 |
| Surface Treatment |
| Applicable Fluid |
| Divisions of Max. Operating Pressure |
| Type |
| Types of Related components |
| Interior Resin Lining |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals | Hitachi Metals |
| Product Series | Pipe Fitting with Sealant, WS Fitting, Variable Diameter Socket | Pipe Fitting with Sealant, WS Fitting, Variable Diameter Elbow | ||||||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||
| Days to Ship | 16 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 11 Days or more | 9 Days or more | 10 Days or more | 14 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 9 Days or more | 10 Days or more | 11 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 12 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 9 Days or more | 9 Days or more | 10 Days or more | 12 Days or more | 9 Days or more | 9 Days or more | 10 Days or more |
| Material | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel | Steel | Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel | Steel | Steel | Steel | Steel | Cast Iron | Steel | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Cast Iron | Steel | Steel | Steel | Cast Iron |
| Max. Operating Pressure(MPa) | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 1 | 2.5 | 1 | 13.8 | 13.8 | 0.35 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 2.5 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 0.7 ～ 1.4 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 1 | 13.8 | 13.8 | 0.35 | 0.35 |
| Connection Type | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread (Terminal) | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Flanged | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread (Terminal) | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Thread (Terminal) | Flanged | Thread <-> Thread, Equal Dia., Different | Flanged | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Equal Dia., Different | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different | Flanged | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. | Thread <-> Thread, Equal Dia., Different / Thread <-> Thread, Unequal Dia. |
| Connecting Shape | - | Unions | Tees | Nipples | Plugs | Unions | Sockets | Flange | Sockets | Nipples | Sockets | - | - | - | Tees | Tees | Cross | Tees | Caps | Bushings/Threaded or Tapped Sockets | - | Tees | Sockets | Unions | Plugs | Flange | Nipples | Flange | - | - | Sockets | Tees | Cross | Sockets | - | Bushings/Threaded or Tapped Sockets | - | Flange | Y Branches | Y Branches |
| Types of Screw 3 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | Rc | Rc | Rc | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | Rc |
| Connection Thread Type M1 | Rc | Rc | Rc | R | R | Rc | Rc | Rc | Rc | R | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | R | Rc | Rc | Rc | Rc | R | Rc | R | Rc | Rc | Rc | Rc | Rc | Rc | Rc | Rc | R | Rc | Rc | Rc | Rc |
| Nominal of Thread 3(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1 1/2B(40A) ～ 3B(80A) | 1 1/2B(40A) ～ 3/4B(20A) | 1B(25A) ～ 2B(50A) | 2 1/2B(65A) | - | - | - | 1 1/2B(40A) ～ 3/4B(20A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 1/2B(65A) | 1 1/2B(40A) ～ 2B(50A) |
| Connection Thread Type M2 | R | - | - | R | - | - | Rc | - | - | - | - | - | - | Rc | Rc | Rc | Rc | R | - | Rc | Rc | Rc | Rc | - | - | - | - | - | - | - | - | - | - | Rc | Rc | Rc | - | - | Rc | Rc |
| Types of Screw 4 (When Different Dia. or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Rc | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Nominal M1 | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) |
| Nominal of Thread 4(Different Diameters or Different Type Screw) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1B(25A) ～ 2B(50A) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Nominal M2 | 2 1/2B(65A) | - | - | 1 1/2B(40A) / 2B(50A) | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | - | - | - | - | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1 1/2B(40A) / 2B(50A) / 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | 2 1/2B(65A) | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1 1/2B(40A) / 2B(50A) | 2 1/2B(65A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | - | - | - | - | - | - | - | - | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/2B(40A) / 2B(50A) | 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 1/2B(15A) / 3/4B(20A) / 1B(25A) / 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | - | - | 1 1/4B(32A) / 1 1/2B(40A) / 2B(50A) | 2 1/2B(65A) |
| Surface Treatment | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Painted | Zinc Plating | Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Zinc Plating | Not Provided / Zinc Plating | Not Provided / Zinc Plating | Painted | Painted | Painted | Painted | Painted | Painted | Painted | Not Provided / Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating | Zinc Plating |
| Applicable Fluid | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Oil | Water / Air / Steam / Gas / Oil | Water | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water | Water | Water | Water | Water | Water | Water | Water / Air / Steam / Gas / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Oil | Water / Air / Steam / Gas / Oil | Water / Air / Steam / Gas / Oil | Water / Air | Water / Air |
| Divisions of Max. Operating Pressure | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | than 2.0Mpa | 1.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less / 2.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | 1.0Mpa or Less | than 2.0Mpa | than 2.0Mpa | 1.0Mpa or Less | 1.0Mpa or Less |
| Type | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting | Fitting |
| Types of Related components | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Interior Resin Lining | No | No | No | No | No | No | No | Presence | No | No | No | No | No | No | No | No | No | No | No | No | Presence | Presence | Presence | Presence | Presence | Presence | Presence | No | No | No | No | No | No | No | No | No | No | No | No | No |
Loading...
Configure
Specification/Dimensions
-
Material
- Stainless Steel
- Steel
- Brass
- Aluminum
- Resin
- Bronze
- Cast Iron
-
Metric / Inch
- metric
-
Max. Operating Pressure(MPa)
- 0.35
- 0.69
- 0.7
- 0.99
- 1
- 1.034
- 1.37
- 1.39
- 1.4
- 1.65
- 2
- 2.5
- 3.45
- 4
- 6.9
- 7
- 10
- 12
- 13.793
- 13.8
- 14
- 14.483
- 15.862
- 17.241
- 18.621
- 20
- 20.6
- 20.69
- 21
- 21.379
- 22.069
- 23.448
- 24.138
- 24.828
- 26.207
- 26.897
- 27.586
- 28.276
- 29.655
- 31.034
- 31.724
- 33.793
- 34.483
- 35.172
- 35.862
- 36.552
- 37.931
- 38.621
- 40
- 41.379
- 42.759
- 44.138
- 45.517
- 48.276
- 49.655
- 50.345
- 51.724
- 52.414
- 53.103
- 53.793
- 55.172
- 62.759
- 66.897
- 68.966
-
Connection Type
- Thread <-> Thread, Equal Dia.
- Thread <-> Thread, Equal Dia., Different
- Thread <-> Thread, Unequal Dia.
- Thread <-> Steel Pipe
- Thread (Terminal)
- Flanged
- Steel pipe ⇔ Steel pipe diameter identical diameter
- Thread <-> Thread, Equal Dia.
-
Connecting Shape
-
Types of Screw 3 (When Different Dia. or Different Type Screw)
-
Connection Thread Type M1
-
Nominal of Thread 3(Different Diameters or Different Type Screw)
-
Connection Thread Type M2
-
Types of Screw 4 (When Different Dia. or Different Type Screw)
-
Thread Nominal M1
-
Nominal of Thread 4(Different Diameters or Different Type Screw)
-
Thread Nominal M2
-
Surface Treatment
- Not Provided
- Trivalent Chromate
- Chrome Plating
- Nickel Plating
- Zinc Plating
- Black Oxide Coating
- Painted
- Resin Coating
- Others1
- Zinc Electroplating
-
Applicable Fluid
- Water
- Air
- Steam
- Gas
- Chemical
- Oil
- Not specified by Manufacturer
-
Divisions of Max. Operating Pressure
- 1.0Mpa or Less
- 2.0Mpa or Less
- than 2.0Mpa
- 3.0 MPa to 5.0 MPa
- 5.0 MPa to 10.0 MPa
-
Type
- Fitting
- Related Products
-
Types of Related components
- Valve
- Nut
- Gasket
-
Interior Resin Lining
- Presence
- No
Narrow search by specifying Manufacturer
-
- MISUMI (0)
- Hitachi Metals (40)
- Yodoshi (29)
- CK Metals (28)
- O.N. Industries (16)
- Inoc (11)
- Kitz (7)
- USA Industrials (4)
- Fuji Special (3)
- Yamato Special Steel (2)
- Asoh (0)
- NBK (0)
- Ihara Science (0)
- SVF (0)
- Kurita (0)
- Yamato Sangyo (0)
- Trusco Nakayama (0)
- Koyo (0)
- Flobal (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy