(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Chuo Precision Industrial Manual Z-Axis Stages（Table Size (Width) W (Range)：41 to 60）
| Days to Ship |
|
|---|
-
Manual Z-Axis Stages - Dovetail, Rack & Pinion
Chuo Precision Industrial
Mobile unit which employs a dovetail groove as a travel guide.
[Features]
· Mobile unit that uses dovetail groove (D-T type) as a travel guide.
· Rack and pinion feeding method allows large distance movements.
· Can be widely used for applications requiring the positioning of cameras, sensors, etc.
· Can be secured with a high holding power lever clamp at any position- Volume Discount
Days to Ship: 8 Days or more -
Manual Z-Axis Stages - High-Grade Z-Axis Lifting Stage
Chuo Precision Industrial
[Features]
· Lifting-type Z-axis stage with both rigidity and light weight achieved by using the HG-VCR method and an aluminum alloy.
· Feed screw, standard micro, and fine-pitched micro feeding methods are available.
· Can be widely used for applications requiring the precise positioning of cameras, sensors, work, and other items.- Volume Discount
Days to Ship: 8 Days or more -
Manual Horizontal Z-Axis Stage - High Accuracy
Chuo Precision Industrial
[Features]
· Lifting type high-precision Z-axis stage with rigidity enhanced by combining many V-CR type guides.
· LV-642-6CL is strong in pulling directions and can be used with its body upside down.
· Can be widely used for applications requiring the precise positioning of cameras, sensors, work, and other items.- Volume Discount
Days to Ship: 8 Days or more -
Manual Z-Axis Stages - High-Grade Aluminum Z Stage
Chuo Precision Industrial
[Features]
· Stage that utilizes aluminum alloy as a main material by the method of HG-VCR to simultaneously achieve rigidity and light weight.
· There is a standard type and symmetric type which can be configured to be symmetrical.
· Standard micro and fine pitch micro feeding methods are available.
· Can be widely used for applications requiring the precise positioning of cameras, sensors, work, and other items- Volume Discount
Days to Ship: 13 Days or more -
Manual Z-Axis Stages - High-Grade Stainless Steel Z Stage
Chuo Precision Industrial
[Features]
· Stage offering high precision and high rigidity by utilizing the HG-VCR method.
· Both the standard and symmetric types can be configured symmetrically.
· Feed screw, standard micro, and fine-pitched micro feeding methods are available.
· Clamp types include plate clamps and operation-side clamps.
· Can be widely used for applications requiring the precise positioning of cameras, sensors, work, and other items.- Volume Discount
Days to Ship: 13 Days or more -
Manual Z-Axis Stages - V-groove Cross roller and Dovetail, High Precision
Chuo Precision Industrial
This is a Z-axis stage which uses a dovetail groove, V groove and cross roller for the moving guide.
[Features]
· Z-axis stage using dovetail groove (D-T type), V groove and cross roller (V-CR type) for the travel guide.
· The rack and pinion feeding method allows movement across large distances.
· Can be widely used for applications requiring the positioning of cameras, sensors, and other items.
· Capable of being secured with a high holding lever clamp at any position.
· Can be used also as a focusing unit such as a microscope because precision positioning is possible.- Volume Discount
Days to Ship: 11 Days or more -
Manual Z-Axis Stages - V-groove Cross roller and Dovetail, Rack & Pinion, Long Travel, 40X50
Chuo Precision Industrial
A Z-axis stage that uses a dovetail groove, V groove, and cross roller for the moving guide.
[Features]
· A Z-axis stage that uses a dovetail groove (D-T type), V groove, and cross roller (V-CR type) for the travel guide.
· The rack and pinion feeding method allows large distance movements.
· Can be widely used for applications requiring the positioning of cameras, sensors, and other items.- Volume Discount
Days to Ship: 23 Days or more -
Manual Horizontal Z-Axis Stages - Fixed Stage, Hex Wrench adjustment
Chuo Precision Industrial
Clampless Z-lift fixed stage that stays in place after position adjustment.
[Features]
· Special mechanism to prevent backlash.
· Use hex wrench to adjust position.
· Can be installed horizontally, vertically or upside-down. (Load capacity restriction depends on installation orientation.)
· Virtually no clamp screws or other projections from the main body, and only the feed screws required for position adjustment protrude.
[Applications]
· Ideal for workpieces that must remain stationary after camera or sensor position adjustment.- Volume Discount
- CAD ：
- 2D
Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Stage Surface Orientation |
| Travel (Range) |
| Load Capacity (Range)(N) |
| Table Size (Length) L (Range)(mm) |
| Table Size (Width) W (Range)(mm) |
| Table Size (Thickness) H (Range)(mm) |
| Feeding Method |
| Guiding Mechanism |
| Table Material |
| Table Surface Treatment |
|
|
|
|
|
|
|
| |
| Brand | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial | Chuo Precision Industrial |
| Product Series | Manual Z-Axis Stages - V-groove Cross roller and Dovetail, High Precision | Manual Z-Axis Stages - V-groove Cross roller and Dovetail, Rack & Pinion, Long Travel, 40X50 | Manual Horizontal Z-Axis Stages - Fixed Stage, Hex Wrench adjustment | |||||
| CAD |
|
|
|
|
|
|
|
|
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 13 Days or more | 13 Days or more | 11 Days or more | 23 Days or more | 13 Days or more |
| Stage Surface Orientation | Vertical | Horizontal | Horizontal | Vertical | Vertical | Vertical | Vertical | Vertical |
| Travel (Range) | ±10 to 30mm | - | - | - | - | - | - | - |
| Load Capacity (Range)(N) | 5 to 30 | 5 to 30 | 30.1 to 50 | 5 to 30 | 30.1 to 50 | 30.1 to 50 | 30.1 to 50 | 5 to 30 |
| Table Size (Length) L (Range)(mm) | 26 to 40 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 26 to 40 | 41 to 60 |
| Table Size (Width) W (Range)(mm) | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 | 41 to 60 |
| Table Size (Thickness) H (Range)(mm) | - | - | - | - | - | - | - | - |
| Feeding Method | Rack & Pinion | Micrometer Heads | Micrometer Heads | Micrometer Heads | Micrometer Heads | Rack & Pinion | Rack & Pinion | Feed Screw |
| Guiding Mechanism | Dovetail Slide | Cross Roller | Cross Roller | Cross Roller | Cross Roller | Cross Roller | Dovetail Slide | Slide Guide |
| Table Material | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy | Stainless Steel | Aluminum Alloy | Aluminum Alloy | Aluminum Alloy |
| Table Surface Treatment | Black Anodize | Black Anodize | Black Anodize | Black Anodize | Low Temperature Black Chrome | Black Anodize | Black Anodize | Black Anodize |
Loading...
Configure
Specification/Dimensions
-
Metric / Inch
- metric
-
Stage Surface Orientation
-
Vertical -
Horizontal
-
-
Travel (Range)
- Up to ±10mm
- ±10 to 30mm
- ±30mm or More
-
Load Capacity (Range)(N)
- 1 to 4.9
- 5 to 30
- 30.1 to 50
- 50.1 to 100
- 100.1 or More
-
Table Size (Length) L (Range)(mm)
-
Table Size (Width) W (Range)(mm)
-
Table Size (Thickness) H (Range)(mm)
-
Feeding Method
- Rack & Pinion
- Feed Screw
- Micrometer Heads
- Handles
- Feed Knob
-
Guiding Mechanism
- Dovetail Slide
- Cross Roller
- Linear Ball
- Pantograph
- Slide Guide
- Liner Guides
- Dovetail, Rack&Pinion
- Lab Jacks
- Helicoid Type
-
Table Material
- Steel
- Stainless Steel
- Aluminum
- Brass
- Aluminum Alloy
-
Table Surface Treatment
- None
- Black Anodize
- Black Oxide
- Electroless Nickel
- Low Temperature Black Chrome
- Clear Anodize
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Related Categories to Manual Z-Axis Stages
-
- Base Plates for Manual Stages
- Brackets for Manual Stages
- Manual Goniometer Stages
- Manual Multi-Axis Stages
- Manual Rotary Stages
- Manual Tilt Stages
- Manual X-Axis Stages
- Manual XY-Axis Stages
- Manual XYZ-Axis Stages
- Manual XZ-Axis Stages
- Manual Z-Axis Stages
- Positioning Stage Suction Plates
- Scales for Manual Stages
-
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy