(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
USA Industrials Resin Plates
| Days to Ship |
|
|---|
-
USA Industrials
ABS has excellent impact strength to withstand strikes and shocks. It is also easy to thermoform.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R105
Density: 0.038 lbs / cu. in.
Temperature Range: -40° to 190° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene
USA Industrials
UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 70D | Density: 0.034 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
These general-purpose acetal copolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. They outperform other materials like nylon in high-moisture environments or when submerged.
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Glass fabric laminated with a flame retardant epoxy resin. G-10/FR4 is strong, machinable, moisture resistant, electrically insulating, and flame resistant.
Grade: G-10/FR4
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.072 lbs / cu. in.
Maximum Temperature: 280° F
Specifications Met: UL 94 V0Days to Ship: 13 Days or more -
USA Industrials
Commonly known as acetal copolymer, this material is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
ABS standard-grade sheets are strong and impact-resistant. It has excellent impact strength to withstand strikes and shocks. It is also easy to thermoform.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R105
Density: 0.038 lbs / cu. in.
Temperature Range: -40° to 190° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Nylon 6/6 has a slippery surface that reduces friction and wear.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M85
Density: 0.041 lbs / cu. in.
Temperature Range: -20° to 210° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
HDPE has excellent moisture-resistance and does not expand in response to water exposure. Stronger and stiffer than LDPE.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating Excellent
Hardness: 60D
Density: 0.035 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
These HDPE sheets, also known as high density polyethylene sheets, are a strong and rigid standard-grade material. These sheets are highly processable and chemical resistant against basic solvents, greases, waxes, and acids with smooth and anti-adhesive properties. .
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating Excellent
Hardness: 60D
Density: 0.035 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene , Antistatic
USA Industrials
Antistatic filler prevents the buildup of static charges and protects sensitive equipment from damage. UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 60D
Density: 0.036 lbs / cu. in.
Temperature Range: -20° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
PTFE is the most slippery and wear-resistant. It also has excellent resistance to extreme temperatures and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade ADays to Ship: 13 Days or more -
USA Industrials
Standard-grade nylon 6/6 sheets are lightweight, easy to clean, and reduce noise. They are easy to machine and typically used to replace metal or rubber parts.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M85
Density: 0.041 lbs / cu. in.
Temperature Range: -20° to 210° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Commonly known as acetal homopolymer, Delrin® acetal is stronger, tougher, and stiffer than other types of acetal. Acetal is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° FDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - HDPE, Marine
USA Industrials
Commonly known as marineboard or starboard, this material offers superior performance where water, sunlight, and other harsh elements are present. Will not rust, corrode, rot, delaminate, or splinter unlike wood or metal alternatives.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: 64D | Density: 0.034 lbs / cu. in.
Temperature Range: -100° to 180° FDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - PVC, Type 1
USA Industrials
PVC Type 1 is a strong and stiff material that is chemically resistant to acids, bases, and alcohols. It is also easy to machine and thermoform, and easy to join using solvents and adhesives.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R115
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 140° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Paper laminated with a phenolic resin. XX has moderate strength and good Electrically Insulating properties.
Grade: XX
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M110
Density: 0.049 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar -Nylon, 6/6, Glass-Filled
USA Industrials
These nylon 6/6 bars are filled with glass so they’re stronger and stiffer than standard-grade nylon. They withstand high temperatures and maintain their physical properties when exposed to heat.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M88
Density: 0.042 lbs / cu. in.
Temperature Range: -40° to 230° F
Specifications Met: UL 94 V-0Days to Ship: 13 Days or more -
Plastic Sheet - PTFE, Glass-Filled
USA Industrials
Glass-filled PTFE sheets have increased rigidity and and more abrasion resistant than standard PTFE. They can be machined to close tolerances and have a naturally slippery, chemical-resistant surface. .
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 60D
Density: 0.080 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - Polycarbonate
USA Industrials
Polycarbonate is clear for applications that require seeing through the panel and has excellent resistance to impact, shock, and strikes.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R120
Density: 0.043 lbs / cu. in.
Temperature Range: -40° to 240° F
Specifications Met: UL 94 V-2Days to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene , Glass-Filled
USA Industrials
Glass filler makes this material stronger and more abrasion resistant than standard UHMW. UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Ratin
g: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 65D
Density: 0.038 lbs / cu. in.
Temperature Range: -75° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
PEI is resistant to hot water and steam. It is one of the strongest materials and has excellent Electrically Insulating properties.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M109
Density: 0.045 lbs / cu. in.
Temperature Range: -20° to 330° FDays to Ship: 51 Days or more -
USA Industrials
PTFE bars are standard-grade and have a naturally slippery surface that makes them suitable for making parts that slide and roll. PTFE resists chemicals and performs well in extreme temperatures.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade ADays to Ship: 13 Days or more -
Plastic Sheet - Acetal, Delrin®
USA Industrials
These acetal homopolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. Delrin® acetal is stronger, tougher, and stiffer than other types of acetal.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° FDays to Ship: 13 Days or more -
USA Industrials
Glass fabric laminated with an epoxy resin. G-10 is strong, machinable, moisture resistant, and electrically insulating.
Grade: G-10
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.065 lbs / cu. in.
Maximum Temperature: 270° F
Specifications Met: UL 94 HBDays to Ship: 51 Days or more -
USA Industrials
Cotton laminated with a phenolic resin. CE is an economical choice with moderate impact strength.
Grade: CE
Color: Brown
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M100
Density: 0.049 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HBDays to Ship: 51 Days or more -
USA Industrials
G-10/FR4 Garolite Bar is strong, machinable, moisture resistant, electrically insulating, and flame resistant. Glass fabric laminated with a flame retardant epoxy resin.
Grade: G-10/FR4
Color: Yellow
Tensile Strength Rating: Excellent
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: Rockwell M110
Density: 0.072 lbs / cu. in.
Maximum Temperature: 280° F
Specifications Met: UL 94 V0Days to Ship: 13 Days or more -
USA Industrials
PEI Plastic Bar is resistant to hot water and steam. It is one of the strongest materials and has excellent Electrically Insulating properties.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M10
Density: 0.045 lbs / cu. in.
Temperature Range: -20° to 330° FDays to Ship: 13 Days or more -
Plastic Bar - UHMW, Oil-Filled
USA Industrials
Oil filler acts as internal lubricant, making this material more slippery and wear-resistant compared to standard UHMW. UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 65D
Density: 0.034 lbs / cu. in.
Temperature Range: -70° to 180° FDays to Ship: 13 Days or more -
USA Industrials
Linen laminated with a phenolic resin. LE is easy-to-machine and good moisture resistance.
Grade: LE
Color: Brown
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Water Absorption Rating: Poor
Hardness: Rockwell M100
Density: 0.048 lbs / cu. in.
Maximum Temperature: 250° F
Specifications Met: UL 94 HBDays to Ship: 51 Days or more -
USA Industrials
PEEK is a high-performance material with outstanding resistance to harsh chemicals. It also has excellent strength and can withstand high temperatures.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M100
Density: 0.047 lbs / cu. In.
Temperature Range: -20° to 480° FDays to Ship: 51 Days or more -
USA Industrials
PEEK bars are wear-resistant and withstand repetitive processes and abrasion. They resist steam, water, and sea water while maintaining their stiffness at high temperatures.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M100
Density: 0.047 lbs / cu. In.
Temperature Range: -20° to 480° FDays to Ship: 13 Days or more -
Plastic Sheet -Nylon, 6/6, MDS-Filled
USA Industrials
MDS filler acts as internal lubricant, making this material more slippery and wear-resistant compared to standard Nylon 6/6.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R110
Density: 0.042 lbs / cu. in.
Temperature Range: -20° to 200° FDays to Ship: 13 Days or more -
Plastic Bar -Nylon, 6/6, MDS-Filled
USA Industrials
MDS-filled nylon 6/6 bars self-lubricate and have a surface that’s more slippery than standard-grade nylon.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R110
Density: 0.042 lbs / cu. in.
Temperature Range: -20° to 200° FDays to Ship: 13 Days or more -
Plastic Sheet -Nylon, 6/6, Glass-Filled
USA Industrials
Glass filler makes this material stronger and more abrasion resistant than standard Nylon 6/6. Nylon 6/6 has a slippery surface that reduces friction and wear.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M88
Density: 0.042 lbs / cu. in.
Temperature Range: -40° to 230° F
Specifications Met: UL 94 V-0Days to Ship: 13 Days or more -
PTFE Plastic Bar - Glass-Filled
USA Industrials
Glass filler makes this material stronger and more abrasion resistant than standard PTFE.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 60D
Density: 0.080 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - PVC, Type 2
USA Industrials
PVC Type 2 has enhanced impact resistance compared to PVC Type 1, while retaining chemical-resistant properties.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R110
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 140° F
Specifications Met: UL 94 V-0Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Grade |
| Color |
| Hole Machining |
| Length A Dimension (Inch Product) |
| Width B Dimension (Inch Product) |
| Plate Thickness T Dimension (Inch Product) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
| Product Series | Plastic Bar and Plastic Sheet - UHMW Polyethylene , Antistatic | Plastic Bar and Plastic Sheet - UHMW Polyethylene , Glass-Filled | ||||||||||||||||||||||||||||||||||
| Days to Ship | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 51 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 51 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more |
| Material | ABS Resin | Ultra High-Molecular Polyethylene | Polyacetal (POM, Duracon) | Bakelite | Polyacetal (POM, Duracon) | ABS Resin | MC Nylon | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | Fluororesin (fluoropolymer, PTFE) | MC Nylon | Polyacetal (POM, Duracon) | Ultra High-Molecular Polyethylene | PVC | Bakelite | MC Nylon | Fluororesin (fluoropolymer, PTFE) | Polycarbonate | Ultra High-Molecular Polyethylene | PEI | Fluororesin (fluoropolymer, PTFE) | Polyacetal (POM, Duracon) | Bakelite | Bakelite | Bakelite | PEI | Ultra High-Molecular Polyethylene | Bakelite | PEEK | PEEK | MC Nylon | MC Nylon | MC Nylon | Fluororesin (fluoropolymer, PTFE) | PVC |
| Grade | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Color | Black / Beige | White / Black | White / Black | Yellow | White / Black | Black / Beige | Black | White | White | Black | White / Black | Black | White / Black | White / Black | Gray | Natural Brown | Black | - | - | Blue | Amber Color | White / Black | White / Black | Yellow | Natural Brown | Yellow | Amber Color | Gray | Natural Brown | Beige | Beige | Black | Black | Black | - | Gray |
| Hole Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length A Dimension (Inch Product) | 12 ～ 36 | 6 ～ 120 | 6 ～ 48 | 6 ～ 48 | 12 ～ 48 | 6 ～ 48 | 12 ～ 48 | 12 ～ 48 | 6 ～ 96 | 6 ～ 96 | 12 ～ 48 | 6 ～ 48 | 12 ～ 48 | 6 ～ 96 | 6 ～ 48 | 6 ～ 48 | 12 ～ 48 | 6 ～ 48 | 6 ～ 96 | 6 ～ 96 | 6 ～ 48 | 6 ～ 48 | 6 ～ 48 | 24 ～ 48 | 6 ～ 48 | 12 ～ 48 | 12 ～ 24 | 6 ～ 96 | 6 ～ 48 | 6 ～ 48 | 12 ～ 48 | 6 ～ 96 | 24 ～ 48 | 6 ～ 48 | 12 ～ 48 | 6 ～ 48 |
| Width B Dimension (Inch Product) | 1 ～ 6 | 1 ～ 48 | 6 ～ 24 | 6 ～ 48 | 1 ～ 6 | 6 ～ 24 | 1 ～ 6 | 1 ～ 6 | 6 ～ 48 | 1 ～ 48 | 1 ～ 6 | 6 ～ 24 | 1 ～ 6 | 1 ～ 54 | 1 ～ 24 | 6 ～ 48 | 1 ～ 4 | 6 ～ 24 | 6 ～ 48 | 1 ～ 48 | 6 ～ 24 | 6 ～ 48 | 6 ～ 24 | 12 ～ 48 | 6 ～ 48 | 1 ～ 4 | 1 ～ 4 | 1 ～ 48 | 6 ～ 48 | 6 ～ 24 | 1 ～ 6 | 6 ～ 48 | 1 ～ 4 | 6 ～ 24 | 1 ～ 4 | 1 ～ 24 |
| Plate Thickness T Dimension (Inch Product) | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 | 3/4 |
Loading...
Configure
Specification/Dimensions
-
Material
-
Grade
-
Color
- Blue
- White
- Ivory
- Black
- Green
- Purple
- Natural Color
- Gray
- Gray Brown
- Black Gray
- Dark Gray
- Dark Brown
- Amber Color
- Beige
- Natural Brown
- Transparent
- Yellow
- Red
- Orange
-
Hole Machining
-
Metric / Inch
- metric
-
Length A Dimension (Inch Product)
-
Width B Dimension (Inch Product)
-
Plate Thickness T Dimension (Inch Product)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy