(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
USA Industrials Resin Plates
| Days to Ship |
|
|---|
-
Plastic Bar and Plastic Sheet - HDPE, Marine
USA Industrials
Commonly known as marineboard or starboard, this material offers superior performance where water, sunlight, and other harsh elements are present. Will not rust, corrode, rot, delaminate, or splinter unlike wood or metal alternatives.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: 64D | Density: 0.034 lbs / cu. in.
Temperature Range: -100° to 180° FDays to Ship: 13 Days or more -
USA Industrials
Commonly known as acetal copolymer, this material is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
ABS has excellent impact strength to withstand strikes and shocks. It is also easy to thermoform.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R105
Density: 0.038 lbs / cu. in.
Temperature Range: -40° to 190° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Polypropylene is an economical material with moderate resistance to water and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell M85
Density: 0.033 lbs / cu. in.
Temperature Range: 0° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - PVC, Type 1
USA Industrials
PVC Type 1 is a strong and stiff material that is chemically resistant to acids, bases, and alcohols. It is also easy to machine and thermoform, and easy to join using solvents and adhesives.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R115
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 140° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar -Nylon, 6/6, Glass-Filled
USA Industrials
These nylon 6/6 bars are filled with glass so they’re stronger and stiffer than standard-grade nylon. They withstand high temperatures and maintain their physical properties when exposed to heat.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M88
Density: 0.042 lbs / cu. in.
Temperature Range: -40° to 230° F
Specifications Met: UL 94 V-0Days to Ship: 13 Days or more -
USA Industrials
Commonly known as acetal homopolymer, Delrin® acetal is stronger, tougher, and stiffer than other types of acetal. Acetal is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° FDays to Ship: 13 Days or more -
USA Industrials
HDPE has excellent moisture-resistance and does not expand in response to water exposure. Stronger and stiffer than LDPE.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating Excellent
Hardness: 60D
Density: 0.035 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene
USA Industrials
UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 70D | Density: 0.034 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HBDays to Ship: 13 Days or more -
USA Industrials
Nylon 6/6 has a slippery surface that reduces friction and wear.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M85
Density: 0.041 lbs / cu. in.
Temperature Range: -20° to 210° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - Cast Acrylic
USA Industrials
Commonly known as Plexiglass, Cast Acrylic is clear for applications that require seeing through the panel and is inherently resistant to scratching and abrasion.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M95
Density: 0.043 lbs / cu. in.
Temperature Range: 40° to 190° FDays to Ship: 13 Days or more -
USA Industrials
PTFE is the most slippery and wear-resistant. It also has excellent resistance to extreme temperatures and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade ADays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - CPVC
USA Industrials
CPVC can withstand higher temperatures compared to PVC Type 1, while retaining chemical-resistant properties.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell R115
Density: 0.056 lbs / cu. in.
Temperature Range: 30° to 200° FDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene , Antistatic
USA Industrials
Antistatic filler prevents the buildup of static charges and protects sensitive equipment from damage. UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 60D
Density: 0.036 lbs / cu. in.
Temperature Range: -20° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - UHMW Polyethylene , Glass-Filled
USA Industrials
Glass filler makes this material stronger and more abrasion resistant than standard UHMW. UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Ratin
g: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 65D
Density: 0.038 lbs / cu. in.
Temperature Range: -75° to 180° F
Specifications Met: UL 94 HBDays to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - PVC, Type 2
USA Industrials
PVC Type 2 has enhanced impact resistance compared to PVC Type 1, while retaining chemical-resistant properties.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R110
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 140° F
Specifications Met: UL 94 V-0Days to Ship: 13 Days or more -
Plastic Bar and Plastic Sheet - Polycarbonate
USA Industrials
Polycarbonate is clear for applications that require seeing through the panel and has excellent resistance to impact, shock, and strikes.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R120
Density: 0.043 lbs / cu. in.
Temperature Range: -40° to 240° F
Specifications Met: UL 94 V-2Days to Ship: 13 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Material |
| Grade |
| Color |
| Hole Machining |
| Length A Dimension (Inch Product) |
| Width B Dimension (Inch Product) |
| Plate Thickness T Dimension (Inch Product) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
| Product Series | Plastic Bar and Plastic Sheet - UHMW Polyethylene , Antistatic | Plastic Bar and Plastic Sheet - UHMW Polyethylene , Glass-Filled | |||||||||||||||
| Days to Ship | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more |
| Material | Ultra High-Molecular Polyethylene | Polyacetal (POM, Duracon) | ABS Resin | Fluororesin (fluoropolymer, PTFE) ～ Polypropylene | PVC | MC Nylon | Polyacetal (POM, Duracon) | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | MC Nylon | Acrylic | Fluororesin (fluoropolymer, PTFE) | PVC | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | PVC | Polycarbonate |
| Grade | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Color | White / Black | White / Black | Black / Beige | White | Gray | Black | White / Black | White | White / Black | Black | - | White / Black | Gray | Black | Blue | Gray | - |
| Hole Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length A Dimension (Inch Product) | 12 ～ 48 | 12 ～ 48 | 12 ～ 36 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 60 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 | 12 ～ 48 |
| Width B Dimension (Inch Product) | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 | 1 1/2 |
| Plate Thickness T Dimension (Inch Product) | 1 ～ 3/4 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 1/8 | 1 ～ 3/8 | 1 ～ 3/4 | 1 ～ 5/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 3/8 | 1 ～ 1/8 | 1 ～ 5/8 | 1 ～ 1/8 | 1 ～ 3/4 | 1 ～ 3/8 | 1 ～ 3/4 | 1/2 ～ 3/8 |
Loading...
Configure
Specification/Dimensions
-
Material
-
Grade
-
Color
- Blue
- White
- Ivory
- Black
- Green
- Purple
- Natural Color
- Gray
- Gray Brown
- Black Gray
- Dark Gray
- Dark Brown
- Amber Color
- Beige
- Natural Brown
- Transparent
- Yellow
- Red
- Orange
-
Hole Machining
-
Metric / Inch
- metric
-
Length A Dimension (Inch Product)
-
Width B Dimension (Inch Product)
-
Plate Thickness T Dimension (Inch Product)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy