(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
USA Industrials
These HDPE sheets, also known as high density polyethylene sheets, are a strong and rigid standard-grade material. These sheets are highly processable and chemical resistant against basic solvents, greases, waxes, and acids with smooth and anti-adhesive properties. .
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating Excellent
Hardness: 60D
Density: 0.035 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
Plastic Bar and Plastic Sheet - HDPE, Marine
USA Industrials
Commonly known as marineboard or starboard, this material offers superior performance where water, sunlight, and other harsh elements are present. Will not rust, corrode, rot, delaminate, or splinter unlike wood or metal alternatives.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: 64D | Density: 0.034 lbs / cu. in.
Temperature Range: -100° to 180° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
Commonly known as acetal copolymer, this material is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Polypropylene is an economical material with moderate resistance to water and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell M85
Density: 0.033 lbs / cu. in.
Temperature Range: 0° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Polypropylene plastic sheets are used for its excellent chemical resistance and easy machinability. Used across various applications in the chemical and semiconductor industries.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Excellent
Hardness: Rockwell M85
Density: 0.033 lbs / cu. in.
Temperature Range: 0° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
These general-purpose acetal copolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. They outperform other materials like nylon in high-moisture environments or when submerged.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Good
Hardness: Rockwell M90
Density: 0.051 lbs / cu. in.
Temperature Range: -50° to 180° F
Specifications Met: UL 94 HB
Days to Ship: | 13 Days or more |
---|
USA Industrials
Commonly known as acetal homopolymer, Delrin® acetal is stronger, tougher, and stiffer than other types of acetal. Acetal is the easiest to machine, wear-resistant, and moisture-resistant.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
HDPE has excellent moisture-resistance and does not expand in response to water exposure. Stronger and stiffer than LDPE.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating Excellent
Hardness: 60D
Density: 0.035 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
Plastic Bar and Plastic Sheet - UHMW Polyethylene
USA Industrials
UHMW Polyethylene has excellent impact resistance and a slippery surface that reduces abrasion and wear. In addition, it is a strong electrical insulator and moisture-resistant.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 70D | Density: 0.034 lbs / cu. in.
Temperature Range: -70° to 180° F
Specifications Met: FDA, UL 94 HB
Days to Ship: | 13 Days or more |
---|
Plastic Bar and Plastic Sheet - Cast Acrylic, Colored
USA Industrials
Colored Cast Acrylic is used for signs, containers, and barriers.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Not Slippery
Water Absorption Rating: Poor
Hardness: Rockwell M95
Density: 0.043 lbs / cu. in.
Temperature Range: 40° to 190° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
PTFE is the most slippery and wear-resistant. It also has excellent resistance to extreme temperatures and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade A
Days to Ship: | 13 Days or more |
---|
USA Industrials
LDPE has good moisture-resistance so it does not expand in response to water exposure. Softer and more flexible than HDPE, making it easy to thermoform and machine.
Tensile Strength Rating: Poor
Impact Strength Rating: Excellent
Water Absorption Rating: Good
Hardness: 40D
Density: 0.033 lbs / cu. in.
Temperature Range: -60° to 150° F
Specifications Met: ASTM D4397-84
Days to Ship: | 51 Days or more |
---|
USA Industrials
PTFE bars are standard-grade and have a naturally slippery surface that makes them suitable for making parts that slide and roll. PTFE resists chemicals and performs well in extreme temperatures.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Hardness: 55D
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0, MIL-P-22241 Type II Grade A
Days to Ship: | 13 Days or more |
---|
USA Industrials
Nylon 6/12 has lower moisture absorption and does not swell like Nylon 6/6.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R115
Density: 0.042 lbs / cu. in.
Temperature Range: -20° to 200° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
These moisture- and wear-resistant nylon 6/12 bars absorb less water and hold their shape longer than standard-grade nylon 6/6. Nylon 6/12 bars are excellent electrical insulators and have a slippery surface that reduces wear.
Tensile Strength Rating: Excellent
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R115
Density: 0.042 lbs / cu. in.
Temperature Range: -20° to 200° F
Days to Ship: | 13 Days or more |
---|
Plastic Sheet - Acetal, Delrin®
USA Industrials
These acetal homopolymer sheets are machinable and resist expanding in heat and moisture, so they can be machined to close tolerances. Delrin® acetal is stronger, tougher, and stiffer than other types of acetal.
Tensile Strength Rating: Good
Impact Strength Rating: Poor
Friction Rating: Very Slippery
Water Absorption Rating: Good
Hardness: Rockwell M94
Density: 0.051 lbs / cu. in.
Temperature Range: -20° to 180° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
PTFE is the most slippery and wear-resistant. It also has excellent resistance to extreme temperatures and chemicals.
Tensile Strength Rating: Poor
Impact Strength Rating: Good
Friction Rating: Very Slippery
Water Absorption Rating: Excellent
Density: 0.078 lbs / cu. in.
Temperature Range: -290° to 500° F
Specifications Met: FDA, UL 94 V-0
Days to Ship: | 13 Days |
---|
USA Industrials
Polystyrene is an economical material that is easy to thermoform.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R70
Density: 0.038 lbs / cu. in.
Temperature Range: 0° to 150° F
Days to Ship: | 13 Days or more |
---|
USA Industrials
Polystyrene Plastic Bar are easy to thermoform and are often used in disposable items, automobiles, electronics, housewares.
Tensile Strength Rating: Poor
Impact Strength Rating: Poor
Friction Rating: Slippery
Water Absorption Rating: Poor
Hardness: Rockwell R70
Density: 0.038 lbs / cu. in.
Temperature Range: 0° to 150° F
Days to Ship: | 13 Days or more |
---|
Plastic Bar and Plastic Sheet - Colored Polycarbonate
USA Industrials
Colored Polycarbonate is used for signs, containers, and barriers.
Tensile Strength Rating: Good
Impact Strength Rating: Excellent
Friction Rating: Not Slippery
Water Absorption Rating: Good
Hardness: Rockwell R120
Density: 0.043 lbs / cu. in.
Temperature Range: -40° to 240° F
Specifications Met: UL 94 V-2
Days to Ship: | 13 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Material |
Grade |
Color |
Hole Machining |
Length A Dimension (Inch Product) |
Width B Dimension (Inch Product) |
Plate Thickness T Dimension (Inch Product) |
Brand | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials | USA Industrials |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | ||||||||||||||||||||
Days to Ship | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 51 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days or more | 13 Days | 13 Days or more | 13 Days or more | 13 Days or more |
Material | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | Polyacetal (POM, Duracon) | Fluororesin (fluoropolymer, PTFE) ~ Polypropylene | Polypropylene | Polyacetal (POM, Duracon) | Polyacetal (POM, Duracon) | Ultra High-Molecular Polyethylene | Ultra High-Molecular Polyethylene | Acrylic | Fluororesin (fluoropolymer, PTFE) | Ultra High-Molecular Polyethylene | Fluororesin (fluoropolymer, PTFE) | MC Nylon | MC Nylon | Polyacetal (POM, Duracon) | Fluororesin (fluoropolymer, PTFE) | Styrene | Styrene | Polycarbonate |
Grade | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Color | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White | White |
Hole Machining | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Length A Dimension (Inch Product) | 6 ~ 96 | 6 ~ 96 | 12 ~ 48 | 12 ~ 48 | 6 ~ 48 | 6 ~ 78 | 12 ~ 48 | 12 ~ 48 | 6 ~ 120 | 12 ~ 96 | 12 ~ 48 | 1200 | 6 ~ 96 | 6 ~ 48 | 24 ~ 48 | 6 ~ 48 | 24 ~ 60 | 12 ~ 96 | 24 ~ 48 | 6 ~ 96 |
Width B Dimension (Inch Product) | 6 ~ 48 | 1 ~ 54 | 1 ~ 6 | 1 ~ 6 | 6 ~ 24 | 6 ~ 39 | 1 ~ 6 | 1 ~ 6 | 1 ~ 48 | 1 ~ 48 | 1 ~ 6 | 72 ~ 288 | 6 ~ 48 | 6 ~ 24 | 1 ~ 4 | 6 ~ 24 | 12 | 12 ~ 48 | 2 ~ 6 | 6 ~ 48 |
Plate Thickness T Dimension (Inch Product) | 1 ~ 3/8 | 1 ~ 3/4 | 1 ~ 4 | 1 ~ 2 | 1 ~ 2 | 1 ~ 4 | 1 ~ 5/8 | 1 ~ 3/8 | 1 ~ 4 | 1/4 ~ 1/8 | 1 ~ 5/8 | - | 1 ~ 5/8 | 1/8 | 1/8 | 1 ~ 5/8 | - | 1/4 ~ 1/8 | 1/4 ~ 1/8 | 1/4 ~ 1/8 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy