(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
OSG Forming Taps
| Days to Ship |
|
|---|
-
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiCN Coated, Grooveless, IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiN Coated, Grooveless, TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - VP New Roll, Grooveless, VP-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - UM New Roll, Grooveless, UM-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - VP New Roll, Short Chamfer, VP-SC-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - V Coated, for Thin Plate Use, V-SS-NRT
OSG
Ideal for tapping soft steel thin plate with a tensile strength of 700 N/mm² or less. Suppresses production of whiskers, flashes, and chipping.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Synchro Tap for Aluminum, HS-AL-NRT
OSG
Highly accurate female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Ultra Synchro Tap, TiCN Coated, US-AL-NRT
OSG
Highly accurate, ultra-high-speed female thread machining is performed without producing chips, due to plastic distortion of aluminum and aluminum alloys.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - High Speed Steel, Grooveless, HRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Steels, Oxidized, Grooveless, NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Carbide, New Roll Tap, OT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT
OSG
Ideal for tapping in large amounts with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Copper, Grooveless, CU-NRT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-HRT
OSG
Suitable for metals such as aluminum, magnesium, zinc, and copper and non-ferrous alloys of these materials.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - X Performer, Long Shank, LT-S-XPF
OSG
[Specifications]
· Shape: Roll tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [◎] / High Carbon Steel (over 0.45% carbon alloy) [◎] / Alloy Steel (SCM) [◎] / Stainless Steel (SUS) [◎] /Tempered Steel (25-35 HRC) [◎] / Cast Steel (SC) [○] / Copper (Cu) [◎] / Brass (Bs) [◎] / Brass Cast Iron (BsC) [◎] / Aluminum Rolled Material (AL) [◎] / Aluminum Alloy Casting (AC, ADC) [◎] / Zinc Alloy Casting (ZDC) [◎]- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT | Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT | Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT | Forming Taps - High Speed Synchro Tap for Aluminum, HS-AL-NRT | ||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Thread Types | Meter | Meter / Unified | Meter / Unified | Meter / Unified | Meter | Meter | Miniature | Meter / Unified | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Thread Size (Nominal) | M1 ～ M45 | M1 ～ No4UN | No0UN ～ M20 | M1 ～ M12 | M8 | M3 ～ M12 | S0.5 ～ S0.9 | M1 ～ No6UN | M1 ～ M12 | M6 | M4 | M3 | M1.4 ～ M3.5 | M1.2 ～ M10 | M3 ～ M12 | M3 ～ M12 | M4 | M4 ～ M6 | M8 ～ M20 | M3 ～ M12 |
| Pitch (P), Thread Count(mm) | 0.2 ～ 4.5 | 0.25 ～ 56 | 0.25 ～ 80 | 0.25 ～ 56 | 1.25 | 0.5 ～ 1.75 | .02 ～ 0.225 | 0.25 ～ 56 | 0.25 ～ 56 | 1 | 0.7 | 0.5 | 0.3 ～ 0.6 | 0.25 ～ 1.25 | 0.5 ～ 1.75 | 0.5 ～ 1.75 | 0.7 | 0.7 ～ 1 | 1.25 ～ 1.5 | 0.5 ～ 1.75 |
| Number of Chamfered Threads (Lcf) | 2P ～ 4P | 2P | 2P ～ 4P | 2P ～ 4P | 2P | 2P ～ 4P | 2P | 1P | 2P ～ 4P | 8P | 2P | 2P | 2.5P | 2P ～ 4P | 2P | 2P | 2P | 2.5P ～ 4P | 4P | - |
| Tool Material Type | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Vanadium High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel |
| Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Stainless Steel (SUS)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[○] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Stainless Steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] |
| Tap Model | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap | Rolled Tap |
| Bore Model | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes |
| Coating Presence | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | None | Included | None | None | None | None | Included | None | Included | Included |
| Coating Type | TiCN | TiCN | TiN | TiCN | Non-Coated | TiN | CrN | TiCN | TiCN | TiCN | Non-Coated | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | CrN | Non-Coated | TiN | Others |
| Overall Length (L)(mm) | 30 ～ 220 | 30 ～ 46 | 30 ～ 105 | 30 ～ 82 | 150 | 80 ～ 150 | 30 | 30 ～ 62 | 60 ～ 200 | 62 | 52 | 46 | 34 ～ 48 | 32 ～ 75 | 46 ～ 82 | 100 ～ 150 | 52 | 52 ～ 62 | 70 ～ 105 | 80 ～ 150 |
Loading...
Configure
Specification/Dimensions
-
Thread Types
-
Metric / Inch
-
Thread Size (Nominal)
- No0UN
- No.10-32UNF
- No.10-24UNC
- No.12-28UNF
- No.12-24UNC
- No.2-64UNF
- No.2-56UNC
- No.3-56UNF
- No.3-48UNC
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- M1
- No1UN
- 1/4UN
- 1/4-28UNF
- 1/4-20UNC
- M1.1
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- No2UN
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- No3UN
- M3.5
- M4
- No4UN
- M5
- No5UN
- M6
- No6UN
- No6-40UNF
- M7
- M8
- No8UN
- M9
- M10
- No10UN
- M11
- M12
- No12UN
- M14
- M16
- M18
- M20
- M22
- M24
- M27
- M30
- M33
- M36
- M42
- M45
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Cast Steel (SC)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy