While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

OSG Spiral Flute Taps

31 items

: 30; 45; 60

Days to Ship	All Same day 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 17 Days or Less 18 Days or Less 44 Days or Less

Spiral Flute Taps - Model A Series, V Coated, A-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Short Chamfer Type, EX-SC-SFT

OSG

Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

On Sale Till 07/03/2025

Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT

OSG

The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

Volume Discount

	Special Price
Days to Ship:	Same day or more

Show Stock Products

Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT

OSG

Ideal for machining alloy steel and pre-hardened steel of 35 to 42 HRC

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT

OSG

Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

OSG

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT

OSG

For standard spiral taps, it is used when the protruding length of the screw is insufficient.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

On Sale Till 07/03/2025

Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

Volume Discount

	Special Price
Days to Ship:	Same day or more

Show Stock Products

Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT

OSG

Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L

OSG

[Specifications]
· Shape: Spiral Tap
· Screw type: metric
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - HR Coated for Nickel Alloy, WHR-NI-SFT

OSG

A highly rigid cutting edge is realized by combining spiral taps with point grooves. Enables stable processing with a long service life for nickel base alloy (40 to 45 HRC) after aging treatment

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT

OSG

Achieves female thread machining of stainless steel using water-soluble cutting fluid

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT

OSG

Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT

OSG

Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT

OSG

Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - For Aluminum, EX-AL-SFT

OSG

Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Synchro Taps for Aluminum, HS-AL-SFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT

OSG

Ideal for deep-hole processing of stainless steel over 2D

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT

OSG

Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT

OSG

The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT

OSG

Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

On Sale Till 07/03/2025

Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT

OSG

Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.

Volume Discount

	Special Price
Days to Ship:	Same day

Show Stock Products

Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT

OSG

Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - For Copper, CrN Coated, CU-SFT

OSG

CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT

OSG

Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

On Sale Till 07/03/2025

Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT

OSG

The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC

Volume Discount

	Special Price
Days to Ship:	Same day or more

Show Stock Products

Spiral Flute Taps - For Non-Ferrous Metals, Deep Hole Machining, EX-B-DH-SFT

OSG

Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM

OSG

[Specifications]
· Shape: Spiral Tap
· Screw type: machine
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - General Purpose Whitworth Screw, EX-SFT-W

OSG

[Specifications]
· Shape: Spiral Tap
· Screw type: Whitworth
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Ultra Synchro Taps, US-AL-SFT

OSG

[Specifications]
· Shape: Spiral Tap
· Screw type: metric
· Chamfer threads: 3 P
· Work Material: Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [◎] / Magnesium Alloy Casting (MC) (◎) / Zinc Alloy Casting (ZDC) [◎]

Volume Discount
Days to Ship: 8 Days or more
Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

OSG

Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

			On Sale Till 07/03/2025					On Sale Till 07/03/2025														On Sale Till 07/03/2025				On Sale Till 07/03/2025
Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	Spiral Flute Taps - Model A Series, V Coated, A-SFT	Spiral Flute Taps - Short Chamfer Type, EX-SC-SFT	Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT	Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT	Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT	Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT	Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT	Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT	Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT	Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L	Spiral Flute Taps - HR Coated for Nickel Alloy, WHR-NI-SFT	Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT	Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT	Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT	Spiral Flute Taps - High Speed Steel, V Coated, V-SFT	Spiral Flute Taps - For Aluminum, EX-AL-SFT	Spiral Flute Taps - Synchro Taps for Aluminum, HS-AL-SFT	Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT	Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT	Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT	Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT	Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT	Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT	Spiral Flute Taps - For Copper, CrN Coated, CU-SFT	Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT	Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT	Spiral Flute Taps - For Non-Ferrous Metals, Deep Hole Machining, EX-B-DH-SFT	Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM	Spiral Flute Taps - General Purpose Whitworth Screw, EX-SFT-W	Spiral Flute Taps - Ultra Synchro Taps, US-AL-SFT	Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT
Days to Ship	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	Same day Show Stock Products	8 Days or more	8 Days or more	8 Days or more	Same day or more Show Stock Products	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more
Thread Types	Meter / Unified	Meter	Meter	Meter	Meter / Unified / Wit	Meter / Unified	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Perforation	Wit	Meter	Meter
Thread Size (Nominal)	1-8UNC ～ M56	M12 ～ M22	M1.6 ～ M20	M3 ～ M12	1/2UN ～ M27	1/2UN ～ M36	M2.5 ～ M20	M3 ～ M10	M3 ～ M12	M24 ～ M30	M4 ～ M8	M2 ～ M24	M1.4 ～ M16	M3 ～ M16	M3 ～ M16	M8	M2 ～ M6	M2.6 ～ M10	M8 ～ M10	M6	M5 ～ M24	M5 ～ M10	M10 ～ M12	M10	M2.6 ～ M10	M6 ～ M16	M10 ～ M16	SM1/4 ～ SM15/64	W1/8	M3 ～ M24	M2 ～ M24
Pitch (P), Thread Count(mm)	0.25 ～ 5.5	1.75 ～ 2.5	0.35 ～ 2.5	0.5 ～ 1.75	0.45 ～ 40	0.35 ～ 40	0.45 ～ 2	0.5 ～ 1.5	0.5 ～ 1.75	3 ～ 3.5	0.7 ～ 1.25	0.4 ～ 3	0.3 ～ 2	0.5 ～ 2	0.5 ～ 2	1	0.4 ～ 1	0.45 ～ 1.5	1.25 ～ 1.5	1	0.8 ～ 3	0.8 ～ 1.5	1.25 ～ 1.5	1.5	0.45 ～ 1.5	1 ～ 2	1.5	20 ～ 56	40	0.5 ～ 3	0.25 ～ 3
Number of Chamfered Threads (Lcf)	1.5P ～ 2.5P	1.5P	3P	2.5P	2.5P	2.5P ～ 3P	2.5P	3P	1.5P ～ 2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	2.5P	3P	2.5P	2.5P	2.5P	2.5P	3P	3P	2.5P	2.5P	3P	2.5P	2.5P	2.5P	3P	2.5P
Tool Material Type	Powdered High-Speed Steel / Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powdered High-Speed Steel	Powdered High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Carbide	Vanadium High-Speed Steel	Powdered High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powdered High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powdered High-Speed Steel
Work Material	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○]	High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○]	High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎]	Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] / Thermoplastic (PVC, Nylon etc.)[○]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Nickel-Based Alloy (Inconel Equivalent)[◎]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○]	Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎]	Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎]	Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Cast Steel (SC)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○]	Stainless Steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[◎] / Thermoplastic (PVC, Nylon etc.)[○]	High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○]	Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Thermoplastic (PVC, Nylon etc.)[○]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]	Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎]	Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]
Tap Model	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap	Spiral Tap
Bore Model	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Through Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes	For Blind Holes
Coating Presence	Included	None	None	Included	None	None	None	Included	None	None	Included	Included	Included	Included	Included	None	None	None	None	None	None	Included	None	Included	None	None	None	None	None	Included / None	Included
Coating Type	Others	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	Others	TiN / CrN	TiN	TiN	Others	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	CrN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated / Others	Others
Overall Length (L)(mm)	34 ～ 250	82 ～ 115	36 ～ 105	46 ～ 82	44 ～ 130	36 ～ 155	80 ～ 250	100 ～ 150	46 ～ 82	120 ～ 135	52 ～ 70	40 ～ 120	34 ～ 95	100 ～ 150	46 ～ 95	70	40 ～ 62	44 ～ 75	150	62	60 ～ 120	60 ～ 75	75 ～ 82	75	44 ～ 75	100 ～ 150	75 ～ 95	42 ～ 65	46	46 ～ 120	80 ～ 200