(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Days to Ship: | Same day or more |
---|
Show Stock Products
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT
OSG
Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
Days to Ship: | Same day or more |
---|
Show Stock Products
Hand Taps - for Difficult-To-Cut Materials, CPM-HT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - V Coated, Long Shank, V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT
OSG
The work material is ideal for female threading of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
Days to Ship: | 8 Days or more |
---|
Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Thread Types |
Thread Size (Nominal) |
Pitch (P), Thread Count(mm) |
Number of Chamfered Threads (Lcf) |
Tool Material Type |
Work Material |
Tap Model |
Bore Model |
Coating Presence |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT | Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT | Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT | Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT | Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT | Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT | ||||||||
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Thread Types | Meter / Unified | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Pipe Taper | Pipe Taper | Pipe Taper | Meter |
Thread Size (Nominal) | 1-8UNC ~ M56 | M1.6 ~ M20 | 1/2-20UNF ~ M24 | M2 ~ M24 | M1.4 ~ M16 | M3 ~ M16 | M3 ~ M16 | M10 ~ M12 | M6 ~ M16 | M12 | M1.4 ~ M42 | M3 ~ M24 | M8 ~ M10 | M4 ~ M6 | M6 | M8 ~ M12 | R1 ~ R3/8 | R1 ~ R3/8 | R1 ~ R3/8 | M2 ~ M24 |
Pitch (P), Thread Count(mm) | 0.25 ~ 5.5 | 0.35 ~ 2.5 | 0.25 ~ 3 | 0.25 ~ 3 | 0.3 ~ 2 | 0.5 ~ 2 | 0.5 ~ 2 | 1.25 ~ 1.5 | 1 ~ 2 | 1.75 | 0.3 ~ 4.5 | 0.5 ~ 3 | 1 ~ 1.25 | 0.7 ~ 1 | 1 | 1.25 ~ 1.75 | 11 ~ 28 | 11 ~ 19 | 11 ~ 28 | 0.25 ~ 3 |
Number of Chamfered Threads (Lcf) | 1.5P ~ 2.5P | 3P | 5P | 5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 2P ~ 5P | 5P | 5P | 5P | 5P | 5P | 5P | 2.5P | 2.5P | 2.5P | 2.5P |
Tool Material Type | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel |
Work Material | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[◎] | Tool Steel (Before SKD Quenching)[○] | Tool Steel (Before SKD Quenching)[○] |
Tap Model | Spiral Tap | Spiral Tap | Point Tap | Point Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Pipe Tap | Pipe Tap | Pipe Tap | Spiral Tap |
Bore Model | For Blind Holes | For Blind Holes | For Through Holes | For Through Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Through Holes / For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Through Holes / For Blind Holes | For Blind Holes |
Coating Presence | Included | None | Included | Included | Included | Included | Included | None | None | None | Included | Included | Included | Included | None | None | None | None | None | Included |
Coating Type | Others | Non-Coated | Others | Others | TiN | TiN | Others | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiCN | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Others |
Overall Length (L)(mm) | 34 ~ 250 | 36 ~ 105 | 34 ~ 120 | 80 ~ 200 | 34 ~ 95 | 100 ~ 150 | 46 ~ 95 | 75 ~ 82 | 100 ~ 150 | 82 | 34 ~ 175 | 100 ~ 200 | 70 ~ 75 | 100 | 62 | 150 | 55 ~ 95 | 62 ~ 95 | 120 ~ 150 | 80 ~ 200 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy